Audition

Unfortunately I do not know what sequence of events leads to this, but while editing audio of around 45-60 minutes in length I will on rare occassions notice that the status bar is showing a duration of 0:00.UPDATE: I was paying more attention to the sequence of events tonight and discovered that this happens when I convert the audio sample type from 44.1 KHZ at 32 bit to 44.1 KHZ at 16 bit. When I do that, the duration window in the status bar drops to 0:00.000 when is actually should show 47:57.618.

When I save a CD layout, the asterisk remains and when I close out the program it askes if I want to save the CD layout even though it has already been saved. I am using the lastest version of Audition (13.0.3.60) on an iMac running OSX 10.15.3.

Is there really no way to rename audio files when browsing them in Media Browser?  This seems like it should be baked into the Media Browser, but doesn't look like it to me. p.s. It wouldn't be a big deal if Bridge allowed you to rename audio files, but it has a bug that prevents that if you are previewing them. 

For MONO sound  match loudnes setting target loudness -19 LUFS, tolerance 0.5LU and max true peak lavel -1.5db is ok for lecture/speech?Can you through some more light on tolerance, what is its impact, what should be its normal range.

I only have 2 voice presets in Audition.  But from watching several tutorials, they show many voice Adobe loaded presets.  How can I access the adobe voice presets? 

I can not get audition to record! It was doing fine when I first started using it with MME but then after a while, there was a latency problem so I read about ASIO. I downloaded asiofree and also asio from my rode website. I also uninstalled and reinstalled audition and ASIO a few times. But Audition just won't work, it won't record anything. It says its recording but its not. Please help! Thanks Ocean

I'm not sure how to do this. 

Hi I have an Adobe Audition project that has two tracks; track one being and MP3 of backing music and track three being my singing accompanying the music.  I wish to save this as a singular MP3 (or similar format) file.  I have tried File>Export>Multitrack mixdown as seen on countless YouTube videos, but this does not work.  All I hear is the singing. Can anyone from the community assist me? Audition is v13 Thank you Nicola

When I edit my podcast, I usually do so with my headphones, so I didn't realize until recently when I listened in a car that my podcast was mixed too quietly. So I looked it up and learned from a bunch of videos that I need to be matching my loudness to -16 LUFS. The issue is, when I do this, I get a lot of background noise. Normally I deal with ambient background noise like this by taking a noise print and using the noise reduction tool, but this time when I do it, there is a strong echo that is produced after running the noise reduction process. Any tips for how to deal with this? I've attached a video with the audio so you can hear what I am talking about (scrub to 0:55).

Hi,I'm hoping someone can explain this odd behaviour to me - basically when exporting a multitrack mixdown, if I have any muted tracks with effects assigned, the export time is, let's say 10mins for example. If I remove the effects of the muted tracks the export time is reduced to a couple of minutes. So Audition is still processing the effects on the muted tracks in the export! Why? Surely, Audition should 'see' that the tracks are muted, thus not required in the final mixdown, so ignore them...?Thanks.

I am running on my new PC W10 AUDITION 13-0-2-35 connected for voice record to an ALESIS IO2 with SHURE BETA 87A microphone. On the old machine I had no problem.1) Now with the new PC I experience burst noise during voice recording. I have tried an other SHUE microphone : same problem! The solution I have found has been to record using the free software AUDACITY and then transfer the recorded file  to AUDITION for edition. 2 When I try to open a file from AUDITION the software crashes  and a message tells me that there has been a problem and that the software has stopped running.Is there a solution to these crazy problems?

I updated to audition 13.01 I am finding out that many of my AU component plugins don't work anymore. Namely Softube Weiss mastering plugins--- that cost me more that $525 bucks!!! --don't work anymore. it works as a VST2, but now I have dozens of plugin chains that I have to go in and change and reset in order to work as before.... SO, I am reverting to version 13.0. is this happening to anyone else? I use AU's on my Mac and rarely use VST's. What a hassle. I have hundrrds of plugins and I gotta check every last one of them!!! the symptom is that when the effects chain is invoked the waveform and sound simply doesnt change, ie the it doesn't effect the waveform at all. when will 13.02 be released??

I have purchased Adobe Premiere Pro but all other apps are grayed out under the edit button. I want to edit in Audition. Can you advise. 

Last night, I saved an Audition 2017 sequence originally imported from a Premiere sequence. No freeze. No crash. No problems.  The sequence reads the correct date and time when I saved it in the file properties. However, upon opening this morning, I get an error message that reads "this file [the Adobe premiere sequence] is either corrupt or using an unsupported file format." I have previously gotten this error message in the past, but the only problem then was the video imported from Premiere no longer worked, and I had to export a video element manually instead of using the dynamic link export. No big deal. This time though, after pressing OK to the error message, all of my progress from yesterday is gone. It opens, but it's clearly opening a previous version of the sequence. Same goes for every backup saved yesterday that's still available. The PEK files from late last night are in my backup's conformed files, so it had to have saved it on some level, b

Hello,   I have a podcast and there is a segment that I do on that show that I have saved on Multitrack many times. Today, I find out that the intro or bed audio is missing. The only thing that I did was to use the same intro that I have save on other shows.   Is there a way for me to find audio on Multitrack that I accidentally deleted in Adobe Audition?   [Moving from generic Start/Help forum to the specific Program forum... Mod][To find a forum for your program please start at https://community.adobe.com/]

I've recorded my first audiobook with around 30 separate clips. I'm wondering about workflow efficiency and sound consistency. Is it best to:a) record/master a large file and then output to clips? b) record a large number of clips and batch process?I've found it hard to judge consistency between clips, eg slightly different attack/energy, perceived volume. Sometimes shorter clips end up with latent differences exaggerated on mastering.And they're a faff to process.If I do them in a oner, will I get more consistent mastering? And if I join my raw clips into a single file, will it be easier to see/hear inconsistencies?I've tried using Multitrack but keep losing files. I prefer working directly with the wavs. My DAW is Audition +RX standard. What do long form engineers do? Is there a 'best workable clip length'?Advice appreciated!Thanks, Jules 

I have a multitrack session file which is shoping up with totally blank files. It represents weeks of work so pretty desperate to get it back. Cant seem to find any version of this session with the files playable in backup. Help!  I started using Audition in the fall and have found it excellent when it works but pretty darn glitchy.  Working on a brand new mac. 

In Audition 13 the default track length seems to be 30 seconds. How do I change the default length and keep it so it always opens to the length I set? Thanks!

That way I can hit my keyboard shortcut then the number I want to amplify by and hit enter. Really quickly. This is how the old Audition worked. How can I do this? I don't want to have to click in to field, or hit tab 8 times.

good app 

Hello,I recently updated my Au and for some reason, I lost all my settings and had to repopulate them. I was able to get more or less back to the same config but for some reason, I am unable to hear the audio when I am using Au to record my podcast. I can hear the sound in my mic since it is patched in directly from my mixing board, but I cannot hear any of the audio being sent through Au. Here is my current configuration: 1. Current version of Au 2. iMac 2017 running most current MacOS 3. Using a Soundcraft Signature 12MTK soundboard. 4. Output from board goes through a headphone amp and into my Bose Speakers. 5. Soundboard is a USB driven device. So all the audio outside of Au I can hear and adjust with no issues. 6. I have checked all the settings in Au including Audio Mapping and Audio Hardware. All seem to be configured correctly. 7. I have checked my iMac audio/sound settings. All point to the Soundcraft as input/output and seem to be configured

I have a narrated screencast that I recorded with Screenflow, then I recorded audio for a Keynote presentation that includes the screencast and exported that from Keynote as a movie. I brought the MP4 file into Audition to clean up the audio. After noise reduction I got the message that I need to save the audio track as a new separate file. After I save it is it possible to see the video from the original file while continuing to work with the audio in the new file?

Hi! We recorder multiple different songs in another PC at cubase software. Now the only way to import thse wavs is by DURATION. Since that is the only thing that tell´s me they are all from the same song. My problem is that when I drag those 10 wavs to my multitrack session, the order on them is different on each song! The bass drum goes on 1st track and it might go on to 4th on next song. This is cos even if I use the sort by "duration" column on project tab in audition, the wavs are in random order - the bass drum wav is not the topmost on the list. Please does anybody here have a deeper understanding of mixing music projects recorded at another software, like cubase?  

Hello.  I'm currently trying to record two seperate audio channels into Audition with one mixer.  So far, I have figured out how to pan one signal to the far left and the other to the far right.  With this I can record a stereo track and split the audio into two individual mono tracks.  Everything with that seems to work fine, except for some reason BOTH the left and right channel tracks sound only through my right earphone, as if they're both panned right.  Upon trying to correct this in audition by using the pan settings, the track will not seem to adjust with your settings.  Any reason why this would be the case? I have also checked my mixer and am certain that each input is panned hard in the opposite direction.  I also know this mixer is capable of recording audio tracks that sound off on both sides.  Finally, I'm also certain that I am indeed recording two seperate audio tracks. Thank you.

Hi, I have an older version of Audition, Version 3 and was sent here to get help. I was wondering where I could get a download link assuming it would work with Win10. I was able to install Version 1. LOL