Audition

We have an upcoming gaming project which requires the recording of a large number of dialogue clips (circa 20,000). Wondered if anyone has any tips or advice re how to create an efficient workflow particularly in the following areas:File naming - each clip will have a predefined file name related to the project so we're looking for possible ways to automate the naming of each clip as it recorded, perhaps referencing a source e.g. .csv or xml file or something. The idea being to speed up the workflow and minimise the margin for human error in the file names.Trimming silence - looking for the best way to trim the silence from the beginning and end of each clip without trimming any silence between the words in the dialogueApplying effects and file saving - there's probably a straightforward answer to this but any advice on how to apply favourites and save each clip in one click as it is recorded would be appreciatedThanks in advance.

Any way of displaying the source timecode for a clip (e.g. this is ProTools with view/clip set to 'original timestamp')?

I am trying to create a favorite that will reduce any selected length by 50% (stretch 50%), but it always remembers the original selection length and won't work on any other selection. Back in the day, I had a favorite that would reduce amplitude by -3db and stretch any random selected length by -50%, all in the one favorite. I could use it on any selection I made.Is there a way to get the latest Audition to do that again?

Is there a way to search the multitrack session to reveal selected files in 'files' panel? (indeed any kind of search or 'reveal in multitrack' function)?

After applying the default Noise Reduction, the noise is still very audible at the tail end of every phrase (spoken word). I'm not sure why the noise isn't being eliminated at those points. How can I get the Noise Reduction process to eliminate all noise, even the noise at the end of a phrase?Thanks!

Does anyone know if there is a way to adjust the levels on multiple TRACKS at the same time, as oppose to adjusting them one by one? I have 10 tracks in this particular session that I want to lower the levels on, but maintain the continuity amongst them.  I need to keep the master gain at 0dB, but lower the track levels so that the master gain levels off at around -6dB. Pretty sure there's not, but figured I'd give this forum a shot.

Show match frame edits (and allow their removal) – Adobe video & audio apps - in case you want to vote for it 😉In most NLEs there is a 'show match frame' or equivalent.Typically this is a small white equals sign indicating where a clip has just been 'split' and otherwise levels/pan etc are exactly the same. The equals sign changes colour (say to red) to indicate that this is still a 'match frame' in terms of time but that there is a difference between either side of the edit (level / pan / clip based plug-in applied etc).So if you make a time selection and CMD+K to 'split' - there would be two small white equals signs across the two edits created - which would turn red if the level of the mid clip was adjusted.They also allow match frame edits to be removed (aka 'joined' in PP).Only way I can see to do this in Audition (once undo is no longer possible) is to 'merge' clips - but this does a mixdown and replace (so is more like a 'render'). Useful at times, but limiting

Hi Everyone!I decided to try to record a podcast while getting a tattoo. I knew minimizing the sound of the gun would be a challenge. Does anyone have advice to do that? (or, frankly, a price to do it for me?Here's the link: Dropbox - Tattoo.m4a Skip to minute 18 to hear the gun sound.

dans Adobe Audition, comment accéder aux données affichées dans l'histogramme d'amplitude de l'onglet "données statistiques" et à celles de l'onglet "affichage fréquence spectrale" ?

Hi,first of all I'd like to say that I really enjoy working with Audition, especially because of it's almost invisible integration with Premiere. I'm doing a lot audio to video and there are some features that I'd like to see in multitrack editor.1) Shortcut for adding crossfade between two clips that are placed on different tracks. Think about a situation when you're editing dialog and you want to keep your room tone consistent. To achieve this you need to fade in and out each clips so that your room tone never exceeds 100%. Presently you have to do all the fades separately for each clip and it's hard to be precise, because snapping is not enabled when working with fades. What I would like to do instead is select the clips I want to add fades to by using Time Selection Tool and then hit the shortcut that creates fade in for incoming clip(s) and fade out for outgoing clip(s). Type of applied fade (cosine or linear) should be defined in preferences by user. This feature would be a huge

I have some vocals I recorded over a backing track, and I'd like to be able to remove the backing music in order to isolate the vocals (as much as possible).I have a separate waveform with just the backing track. Is it possible to use the backing track waveform as a selection (or mask) in the recording with the vocals, enabling me to essentially cancel out the music?

I've been recording a podcast for a few months now,  typically I record 4 tracks simultaneously for about 1hr-1.5hrs. I've never had any real issues until now. After recording this weekend I realized (in post-production) that some of my audio is sped up and noisy. Obviously the tracks are significantly shorter, but my first thought was to check my undo-history to see if it was my fault.There was one difference that I remember during this recording and that is at one point I paused the recording for a bathroom break. I'm not sure if this could be the source of the issue but I would really like to recover this audio, or at the very least document the cause so that I may avoid it in the future.Please help.Specs:MacBook Pro (Retina, 13-inch, Early 2015)2.7 GHz Intel Core i5macOS High Sierra (10.13.4)

Anything involving audio that I've tried works fine, but the video aspect is completely useless currently. I don't have an error report, but here's a screenshot of whenever I import a video clip into audition. Help!

When I upload audio files into Audition, the sound become distorted by crackling and pop sounds - both in waveform and multitrack? The original files are fine, I've listened to them externally from Audition, which makes me think it has to do with the editing software itself. I've recently upgraded to CC 12, but still same problem. And the software functioned fine during the earlier half of the year - this has only happened recently (in the past month or so). It doesn't effect the sound of the final podcast but it's frustrating to edit with. Has anyone experienced this before?

Hello,I am experiencing weird problem. In my audio session for video documentary there are some clips that look perfectly normal. Except when you try to play them random scratching/popping sound ocurs (like audio ending in the midde of sound, no fade out). When playing in waveform view it works well. If I try to play them few times in a row it starts to work better somehow. I really wouldn't mind this problem but it also affects final mixdown. When I play exported mixdown with these same parts, the sound of each problematic part changes from the beginning. It starts sounding like low pass filter and after 1 second it fades to normal. I hope I explained good enough.What could be the problem? I tried different mixdown settings but problem stays. I also tried pre-rendering tracks and it is the same. I am using quad core HP Elitebook 8570w with 16 gb RAM and SSD. I use Roland UA-25EX sound card and MME setting in Audition. Latency is set to 250ms. I would appreciate any help.Thank you!

Hello,I am using Audition CS6. However, I am with Audition an absolute layman! I am not familiar with the technical terms and therefore have problems using the search functions.I have a concert recording for a friend as an mp3 file. My girlfriend needs this piece of music to practice. However, this song is almost 4 hours. She has great difficulty finding the places when she has stopped playing. Now I wanted to install markers to which she can jump back and forth on the CD. It works in audition but not on the CD. Where is my mistake? How do I solve this problem?Regards and thxJoe

I was forced to upgrade to Win10 pro upon having to replace my mobo and cpu, the i78600k which will not work properly on win7 pro.  My other Adobe software programs are working just fine but Audition is all kinds of wonky and I am unable to get it to work after reinstalling and going back to the 2018 version as well.  I did a quick Camtasia vid to elucidate what is (not)happening.  Any help would be greatly appreciated!     Here is the link:  Audition not working - YouTube

Greetings,      I am making a short Animated film in which I have children and a witch.      Since this is low-budget work, I would like to use my own voice as a reference (for acting out emotion, emphasis, etc).      Amazon has an AWS utility called Polly which does Text to Speech in different voices, e.g. English-Australian with Male, Female, young girl/ boy characters. However, the problem with Polly is that there is no emotion/ Voice acting ability in it.it       I  was wondering whether I could use some software plugin (such as a Vocoder perhaps) which would take my voice as a reference, but generate speech in a voice similar to Polly's output?      Thanks in advance for your reply.Regards,Rajnesh

Hi! Im quite new to Audition and have found out how to do Text-To-Speech although when i try to change It to male, It is greyed out. I am using Audition CC 2019

Hi people, I am wondering is there a possibility or better way to make two recordings sound like they were record at the same time when they are really a instrumental recording recorded one day and then a vocal recording recorded another day...Is it possible to do this...I am wondering would a layer of the instrumentalThen a layer of vocals Then a layer of  of instrumental Make it sound less like one was just laid over the top or would it just still sound the same as if I had just laid a instrumental over the vocals?Just wanting to do my best so that the vocals don't sound like a voice over....And people don't say hmm..."why does it sound like the instrument is covering up the vocal?"?Thanks for your advice and possibly help!

Hi. Am having an infuriating time. I have to complete a podcast edit for a client, and Audition won't work. It just crashes either on start up or just after. I have tried going back to CC2017 and it does the same.There was a dialogue box saying there is a "workaround or solution" and pointing me towards this page which contains neither: Audition Crashed. Now what? I'm getting seriously fed up with Creative Cloud's instability. This seems to have been an issue for a while - has anything been done about it?Running Windows 7 PC.

Hello,I'm trying to record using ZYLIA ZM-1 (USB microphone array http://www.zylia.co/zylia-zm-1-microphone.html ) and Audition, but every time I try to choose ZM-1 ASIO driver in Audio Hardware, Audition crashes. Do you have any ideas how to fix this? I'm using Windows 10. Thanks in advance!

I have a question and could appreciate some help.  I record a podcast with up to 3 blue yeti mics on audition with a dell g5 5587. No issues.  I wanted to add a 4th mic as I have done in the past with a dell latitude that had 4 usb ports, this laptop only has 3.  So I purchased a powered usb hub and got the error not enough controller resources when I opened audition. Would anyone know if you can use a powered usb hub?  It was a 3.0 speed maybe I should downgrade to 2.0 hub?  Just wanting to add more inputs.Thanks

Hi, when I record a Favorite it ignores my spectral selection. It would be nice to have that feature. For example I need it to edit partials in many string samples, a spectral Favorite would be great here Cheers,Guillaume

Hello,I'm assuming this isn't possible but I figured I would as the Adobe brain trust before giving up!  I work at a radio station.  We have CS5.5 and I use CC on my iMac at my home studio.  However, I have favorites which I would love to import into my iMac.  I would recreate them if I could remember the processes!    I was just wondering if anyone knew of way to accomplish this?