Audition

As I trim, nudge, move clips in the timeline there are 'hidden' portions of clips - sometimes whole timeline clips. I can see this being useful but it can have unintended consequences (it is still 'used' media, for example).Is there a command to 'remove hidden' or similar?Thanks

Hi Guys,I'm really new here, I hope this is an appropriate way to ask for assistance?Using Audition CS6, I've programmed a multitrack audio file that is the backing track for a stage show I've got coming up atm, and I've just started rehearsing it with the band. It's a rather large multitrack.. it runs for 3 hours (the full show length), and the multitrack contains 15 different audio instruments, and each instrument is broken down into various clips.. the various clips all up probably total about 400 clips over the 3 hours.Anyway, whilst all playing to it in rehearsal, it glitched the playback of all the tracks very noticeably and we were all suddenly out of time to the whole thing, even though we have a rock solid click track programmed into it all. The show starts in two weeks and this is something I've not encountered before. Is there a suggested settings setup I should have in place for Audition? I'm literally just running Audition on my Macbook Pro (running OSX 10.9.5) and just ta

Coming from NLE background, I'm editing a podcast in Audition. I'm used to being able to edit dialogue very easily in Premiere Pro, and finding it less easy! Hoping this is just lack of knowledge.I can use JKL to play and then mark in, mark out, and ripple delete between marks from keyboard. This is my go to basic trimming tool. I can jump from edit to edit. Is there a 'roll' trim mode? (i.e. where I have made a rough edit, timing is OK, I just want to move the edit point to a better place). Seems like the 'nudge' commands only allow for ripple trims from the keyboard.Is there a 'sync lock' for all tracks command? (i.e. all the tracks are synchronous and I don't want to put them out of sync). I can 'Group' the clips but then as soon as I edit them they stay in the same group and that might make trims tricky (but maybe not)I can select clips to end, to start etc but cannot figure how to select clips under the playhead? (e.g. if I have razored a section I want to remove). Or select clips

I am using 2 different cloud-based software to record podcast interviews, Cast and Ringr. I really like the sound that comes from Cast, but sometimes their platform isn't reliable. I recorded an interview on Ringr, but their processed audio version has a lot of dropouts in the audio, so I am using the raw files instead.I have been playing with eq and different effects for hours trying to get the sound of the raw audio to sound like the processed files from Cast, but I am not that great at working with audio to be able to get it spot on. Is there a way to somehow analyze the audio from Cast, and then auto-apply that to the raw files to get it to sound similar?

I am ingesting old tapes to WAV though a Focusrite. It has been working fine for months, THEN I updated Audition (Build 11.1.1.3) and now I CANNOT get the Tracks (1 and 2) to map to the Master Bus. This should not be that complicated, but I cannot figure out what has changed.When I open an older session it plays back just fine, tracks 1 and 2 map to Master. When I attempt to append to a working session, it still will not send to Master. This makes absolutely NO SENSE. I have not changed a thing.

I have CS6 set up the way I like it on Win 10 pro.  Now I'm moving to CC I have to reinvent the wheel and would like to save my CS6 appearance settings and import them into CC1) Is this possible?2) where are the files?  (I have looked in C:\Users\Owner\AppData\Roaming\Adobe\Audition\5.0) and there is also a folder C:\Users\Owner\AppData\Roaming\Adobe\Audition\11.0 on my pc which appears to be the CC settings.3) I tried a test save of the appearance settings out of CS6 with an easily identified name but cannot see any specific file so assume it is bound up in one of the xml files.4) Can I copy the CS6 MachineSpecificSettings.xml file over to the CC directory (saving a copy of  the CC one elsewhere of course) or will this completely screw the CC app?Would appreciate the advice as I really HATE the colour schemes in CC (and of course the unnecessary tweaking to make you feel you are getting value for money...)ThanksAnne

I am using CS6 and followed these instructions at this link:https://helpx.adobe.com/x-productkb/global/offline-help.htmlI got it all working and the audition_reference.pdf will open fine.  However, the link states this at the bottom:Note:If your computer has an Internet connection, selecting Help or pressing F1 opens the online help even if you install the PDF.  Disconnect your computer from the Internet to ensure that the PDF launches correctly when offline.I do not want to disconnect from the Internet.  Is there any way I can modify the registry or an Adobe file to open the off-line PDF while still on-line?

What are the basic processings of Click/Pop Eliminator ?The built-in manual in Audition 3 is a beginning of answer, but by far not complete enough.Please correct approximate English

When I slow down the audio, it creates this scratchy high pitched ringing and I was wondering if there's a way to clean that up?

Hello. Few days ago I was at the concert and recorded video but later I found out that it sound terribly distorted (from 0:13 sec) It sounds like "dank memes". Is there any way to fix it? https://drive.google.com/file/d/16AF1K0a39Det94i7kIauQGD68yqqvpwy/view?usp=sharing

Hello. Few days ago I was at the concert and recorded video but later I found out that it sound terribly distorted (from 0:13 sec) It sounds like "dank memes". Is there any way to fix it? https://drive.google.com/file/d/16AF1K0a39Det94i7kIauQGD68yqqvpwy/view?usp=sharing

I need to knock down some mp3 kbps rates from 320 to 128 - can't figure out how to do it.  "Convert Sample Type" doesn't apply here.   Using a Windows 10 64-bit system with Adobe cs6. 

I've been using Audacity and was interested in a tool that I can take an audio file from an iphone or Samsung phone in MP4a format, importing it into Audition, editing it, and exporting to MP3 format. Can Audition do this?Soph

Please help setting up a stereo up mixing VST plugin Penteo composer 5 in Audition. 2 channel stereo to 6 discrete channels. I saw overviews all over the internet but not specific setup instructions. Will it even work as a plugin in ?.ThanksRick

Can anyone advise me which feature on Match Volume would be best for me?I am compiling CDR's of chart hits old and new and have been told Adobe Audition CS^ (which I have) is highly recommended for this.ITU-R BS.1770-2 LoudnessLoudness - ? LUFSUse Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msTotal RMSLoudness - ? dBUse Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msFile (Total RMS)Use Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msPeak AmplitudePeak Volume ? dB Use Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msTrue Peak AmplitudePeak Volume ? dB Use Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msLoudnessLoudness - ? dBUse Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msPerceived LoudnessLoudness - ? dBUse Limiting - Yes or No?Look-Ahead Time - ? msRelease Time - ? msAny help with these various settings would be much appreciated

I opened a project, closed it out and opened it again later.  When I re-opened the project two things happened: 1) some clips went offline and I couldn't link them, I had to re-export them and bring them back into Audition.  2) Now I have to toggle the Solo button to "on" to hear the tracks.  So I have everything Solo'ed to hear it all playback.What's up with this Adobe Community?

I just started using Audition CC 2018 and noticed a large  change from Audition CS6.  In particular, when I use the heads-up display (HUD) to lower gain in a section, it will sometimes not show the result in real time.  It's only after I've raised or lowered the gain and release the controller that the change is shown.  Previously, I could watch the section fall or rise in real time; this lag is annoying and really makes the HUD control useless.  It also doesn't happen all the time.  Another quick issue that could be related is that I can't cleanly insert audio from another file with fidelity.  Audition either leaves some of the old sound I wanted to replace or cuts off some of the new sound I want to insert.Any help would be very much appreciated!!!

AUDITION 3.0.1Nowhere was ever stated, in manuals, forums, and the like, the difference between AUTO HEAL (favorites) and SPOT HEALING BRUSH tool.Moreover, SPOT H.B. isn't available outside spectral window, AUTO H. is.Please correct approximate English.

Im a sound designer and my editor has been using audio effects in premiere an then once we go to adobe audition, some of the effects have errors opening up? Do you know why this could be?And my 2nd question is am I able to edit his audio effects (EQ, compression, reverb etc...) in Audition? There is a star icon indicating clip has effects but where is the tab to adjust his settings, or bypass?Thank you so much

This situation, with preliminary listening directly in the program (Adobe Audition cs 5.5) on some track, I expose the breeding by channels (in the left ear, to the right ear) and everything is perfectly audible. But as soon as I try to export everything to the track, no matter what format (mp3, wav) when listening to this file, I don’t hear any changes, channeling is not, the problem is with the pan effect, which is not in the track but on the recorded audio file (blue bar). Help who knows what the problem is.

I've opened up two different sessions in Audition. I'll copy a set of audio tracks from one session, and then paste those tracks into a different session. The files with their sound and waveform are there, but when i save it, the sound and waveform disappears. The original audio track will be perfectly fine in the main project folder, but I can't link the original audio track. I've tried deleting the media cache, but it still won't work. I'm working on a mac.

Greetings all, I'm a novice when it comes to using Audition and audio engineering in general. I just started working on some projects as a hobby, no prior experience. So please forgive my lack of knowledge and lingo However I have a question and I don't know it's possible.Is there an easy way to auto silence parts of a track based on audio levels? I did some recording with a partner, they sent me their audio file and listening their mic is picking up my audio, because it was coming through speakers not headphones. Obviously my feed back is a much lower level when heard vs when she is talking. I'm wondering if there's a way to filter out the backround audio on her track?I'm layering our tracks over each other in a multi-track session and our timing isn't exactly synced up which also may be an issue.Thanks in advance everyone!

Does anyone know how can we give reference of component in a metadata components? eg. i have datasource component and i want to give its sling:resourcetype to metadata component (like we work with normal components) but it's not working.

I am -- for the first time as a non-engineer -- recording, editing and mastering  an audiobook.  I have learned a lot and have pretty much mastered the process to bring in a wav file that conforms (exceeds, actually) the ACX/Audible requirements for RMS statistics.  BUT....I am struggling with a chapter which seems to have come adrift from its source media.  I have a fully edited and clean Multitrack version, but I cannot seem to sync it with the corresponding WAV file. I have assumed that each multitrack session (I have only one track, actually, plus room tone), would have a synced and complete corresponding assembly of source clips that I could then use for statistical analysis and final output to WAV.  But this ornery chapter does not.  It only brings up isolated clips, which end at the point where it runs into a mistake and we did the punch-and-roll.I tried doing a multi-track mixdown, and then exporting that as a WAV, but it won't let me;  the op

So when I'm working in Audition and adding effects via the Rack, once I apply and save, I'm no longer able to change any of the effect again. The effects that were in the Rack are gone. Is there another way that the effects dialog windows can be re-opened?