Audition

Hello All,I apologise for asking a question that has already been asked thousands of times already over the internet but I am at a loss.I have a long interview using radio mics and throughout the recording an awful intermittent buzz/frequency/hum can be heard over the voices. I have watched many tutorials about noise/buzz removal using Audition but every time I try to replicate the smooth removal of the problematic buzz, it does not go away at all from my recording. I have tried using noise reduction tools, using the noise print tool, removing certain frequencies from the waveform etc but it's like a wine stain that won't come out.I really would like to know if anyone else could have a go at improving this clip so that I know if I'm either incompetent or alas the recording cannot be saved.Here is a clip with two examples of buzzes over different voices:Buzz over dialogue clip by Pippa Young | Free Listening on SoundCloud I would greatly appreciate if any Audition wizards could help out

When playing back a selected section the playback stops at the end of the section. Fine. But when restarting the playback it starts from the end of the section. How do I make it restart from the beginning of the section? This may seem trivial but is absolutely essential to my use of the software.When playing back a selected section the playback stops at the end of the section. Fine. But when restarting the playback it starts from the end of the section. How do I make it restart from the beginning of the section? This may seem trivial but is absolutely essential to my use of the software.

GUYS PLZ HELP IM MUST KNOW THAT

Hi I am using Audition CC 2018 to do sound design for a film. I have added multiple track effects and clip effects across the project. The most common effect being used is "Full Reverb" as the film takes place in a cave. Till a certain point, the scrubbing wasn't a problem. But now with most of the audio in, it has a seriously long freeze time and scrubbing is impossible. I have switched on the Pre-render option for the tracks that have Full Reverb in it. But still I am facing this issue.

I would appreciate any help trying to figure out what is going on with my new studio. I do voice over work for audio books and e-learning solutions, so need clean, single-track audio of just my voice, which means I can get by with a fairly simple setup. I recently have had to replace my entire recording chain and so am really starting over.Every single recording I make contains electronic "hiss."I'm using an SM7B running through a Cloudlifter CL-1 into a Mackie Onyx Blackjack. Gain on the Blackjack is set around -40db, recording into Audition CC2018 on a MacBook Pro OSX 10.13.1.The SM7B is by nature a very low-power mic, so once the audio is in Audition I have to adjust it which results in the very clear "hiss" running throughout the recording. Using Noise Reduction removes the hiss in more quiet areas but is still discernible in areas with voice. Additionally, the vocal quality is suffering once the hiss has been removed, sounding over processed.Any suggestions?

C'mon guys, you've completely changed the way this works.Previously if you moved the playhead, then pressed play, the playhead would play to the center of the screen before centered scrolling starts. Now the playhead jumps to the center immediately so you can't keep track of where you are. PLEASE CHANGE THIS BACK.In the meantime how do I downgrade to the last version - I can't work with this the way it is.Neil.

It would seem that there should be a way to make shortcuts conform to the same as Premiere Pro. For example, moving a clip a definite distance (frames) Select clip enter + to move the clip forward or backward.  Also, there should be a snap on and off like in Premiere pro to more easily put markers and move the playhead onto a marker.

Hi all,I am in need of some collective expertise/thoughts. I have some live concert audio that was recorded on a new mic that I unfortunately was not able to get familiar with before the shoot and could not monitor the recording through headphones (big drawback of the Sony A6300). While monitoring the levels through the camera's viewfinder, they appeared to be ok, but upon offloading the media I quickly realized the audio sounds quite distorted, despite never clipping.I know there is often not much that can be done to repair distorted audio, but my knowledge here is quite limited. Would love to get some thoughts on whether there is anything I can do to repair this recording. I am not expecting a miracle, but hoping there's a chance for even some improvement here. If you have a few minutes to take a listen, you can find the recording in my Dropbox here: Dropbox - Distorted Audio Sample. Any assistance would be much appreciated.Thank you!Todd

I am a very NEW user of adobe audition.  I am launching a podcast and have done a series of interviews.  I have two tracks for one interview and now want to export the interview into one file.  what do i do? THANK You

Ojala me puedan ayudar.No se escucha y no se puede editar el audio en un video en audition.Este proceso lo así muy bien antes de actualizar al sistemas macOS High Sierra.Gracias.

Ever since I upgraded to High Sierra, the location thats shows in my media browser section changes.  It is defaulting to a folder called 'Audio,".  Each time I record a new audio file, I have to manually navigate back to "desktop," "audio," where the file was recorded to.

Adobe gods -Cakewalk Sonar who is currently owned by Gibson guitars, closed it doors on Black Friday. Adobe needs to buy it, and I am sure it can be had for a song. With a little sparkle around the edges from Adobe's magic wand, Sonar - can become the most creative and graphically exciting Digital Audio Workstation on the planet.You are presently doing Audition, why not take it to the next level and become the authors of a full-fledged DAW.Touch Screen is just getting started, and that's where Adobe can shine. Technically, Sonar is already a solid program, it just needs some good old marketing Buzz, and a little more shake, rattle and roll to place it far above the rest in this galaxy of sound... Call them!Do this!Now!dmc

Hi!I found a question about the topic but maybe enough time is passed, so there is the chance for me to find a people who still managed and solved the problem.I bought Melodyne 4 Essential today. I tried to connect it with Audition CS6. But Audition tells me that there is something wrong. Can anyone help me? Or is there just the chance to use Melodyne as Stand-alone?Thank you Josie

Hi to everyone!There are CDs that are able to store up to 900 MB or 100 minutes of audio. I didn't find a way to brun my recordings to these CDs.Audition just tells me, that I have to reduce the length of my track.Does anybody know a solution?Greetings Moritz

When I run the Match Loudness batch processing in Audition CC, i get at a random error, where  a few of the files are gained to 0 db (empty files) and, other random files will have a volume fade in. I typically batch process 30-100 files, and maybe around 5% of the files are affected. The ones that are gained to 0 dB are pretty easy to spot, but unfortunately not the ones that have a volume fade in. All the files are speech files originally at aroung  -20 to -30 dBLUI am using Adobe CC with these settings.ITU-R BS.1770-3 LoudnessTarget Loudness -16Tolerance: 0.5 dBMax True Peak: -1Lookahead: 12 msRelease: 200

Details:OS 10.12.5MacBook ProAudition 17.1.1 releaseBuild 10.1.1.11I've gone through both Sound Devices' and Adobe troubleshooting guides, have checked and rechecked every possible setting. Is anyone using the USBPre 2 successfully with Audition?Sound from the USBPre 2 comes in fine to my Mac. I can record a voice over to Quicktime and it sounds great. But the signal is not showing up in Audition when I hit the record button. Here are the settings.

Hi. I bought recently Samsung Galaxy s7 and I will do vlog using this mobile phone.Currently I run out of money so I will use build in microphone. The voice is actually isn’t so bad for a mobile but I would like to improve it in Adobe Premiere. I increase Gain to +10 dB because of the distance to microphone, I boost Treble to +5 dB and reduce Bass to -2 Db. Of course I used I Denoiser with setup like this:Actually my settings looks like this:Overall denoiser fx works well but I would like to improve how sound my voice.I hope there are some experience guy’s on this forum to help me setup some audio fx in Premiere Pro CC.Here are 2 files:https://files.fm/u/qr9mgtwxFirst file is my voice recorded without fxSecend file is recorded with above fxWhat you think what kind of audio effect should I add and how to setup them?

HelloThanks in advance!I made a basic mix of my short film in Premiere. Now i sent it to Audition to finish but it sounds much louder in Audition.The clip levels are the same in both apps, the Volume envelope in Audition is at 0.I am switching from Premiere and Audition, playing the same section in both and it sounds much louder in Audition and the meter shows that difference even though everything seems the same.Any ideas why?I could try sending the mix again from Premiere to Audition without selecting "Pan and volume information" but i dont want to remix all those levels again...Thank you very much!Leon.

This is a gratuitous post, maybe. But, it is rare that I encounter something new that is of fundamental importance. I just learned that you can edit the spectral display with a mouse... Holy cheese! I'm stunned. Incredible.

Hi, When importing OMFs or AAFs into Audition, they are brought in as dual mono. I would like to work with these files in stereo, whilst keeping any existing keyframed data from the OMF. This is possible in Pro Tools, as the dual mono clips can be dragged into a stereo track with the keyframes still present in the new stereo track. In Pro Tools you can then make adjustments to the stereo track without having to adjust both the Left then the Right separately. This is important as I would like to receive OMFs from the video editor and build upon the keyframes they have already made (and not start from scratch). As I understand it, I have 3 options but none of these are satisfactory. 1. Pan the two mono files left and right on the track sidebar, and group the clips - yet this means if i wanted to adjust the keyframes, I would have to alter them on the left and then the right which is tedious and time consuming. 2. Pan the two mono files left and right on the track sidebar, and then send t

hello,i want to record the Reason Software in Adobe Audition but i dont understand why there is some latency while recording.when i dont record in audition, theres not latency in Reason.why it doesnt record live?can you explain me ?thank you very much

after updating adobe audition 2017 to 2018 noticed feed back when  we play back music while recording is on in multi track mode. In waveform mode we can play the music while recording is on. in 2017 also we do not hear any feed back. how to correct this fault.palliyagurusri lanka broadcasting corporation.sri lanka

Hi,I was given a video that was shot with a cellphone. I could understand what's being said but the audio seems to have that "underwater" sound to it.  It's much like when you call a radio station and your radio is turned up high that there's feedback or like an echo.  Is there a way to remove it using Audition CS6 or any Adobe Product? Highly appreciate any ideas.  Thank you!Regards,Jo-Ann

I thankfully have them all saved to my hard drive but I thought the point of having the cloud was so I wouldn't lose my files.  So when Creative Cloud did it's automatic update ALL the files that I had saved to there were gone!  I did not actively delete them nor was I given a warning of their deletion.  Is there any chance that these files are retrievable, and how likely is this to happen again?

I recently updated to audition 2018. When I use the icon to start it says configuration error please uninstall and reinstall. When I start it from the Adobe menu in the desktop app it works fine. I am running High Sierra on a mid 2015 macbook pro with a core i7 and 16 gigs of ram. HD is pure ssd.