Audition

i have uploaded a vocal recorded on a Neumann u87 along with a Neve 1073 2ch mic pre. and a whole bunch of other outboard gear. im having trouble getting this vocal not to sound sort of muffled when played in my car at high volume. while mixing with my yamaha ms80's i do not hear any muffled sound though. only when the mix is done and its played in headphones or my car. its not really bad, but just slighty the clarity in the vocal sounds a little muffled when volume is pretty high. do you think this is due to the actual recording and i have to re record it, or it can be fixed by putting a limiter on it or something? as i said...playing the vocal by itself through my studio monitors i do not hear any distortion of muffledness at all, what am i missing here?heres a link to the vocalDropbox - RELL VOCALS.mp3

I record my show using 3 Mics, and a H6 Zoom. When I transfer the audio to Audition I can never seem to clear the background on each audio track. It still picks up the other two hosts of the show, even at a distance away. Is there a clear cut way to completely cut the extra background noise? Obviously I don't want to change the main vocals on the the track, but if it picks mine and another person's voice up while the other host is talking into their own mic, how can I get rid of it? I have tried to noise print( noise reduction process) and learn sound model( sound remover) it and nothing seems to work. I am fairly new to editing any type of audio and to be honest I really can't seem to get this thing down right.PLEASE HELP!!

I have updated to Audition CC2017, and I am trying to change the bitrate on a file when it is being exported to an MP3. It is taking almost 2hrours for a 43 min audio recording. Am I doing something wrong? Or is this just the way it is?I have been exporting to MP3 with no problems before extremely quick. But I haven't changed the bitrate before as now I am trying to save space for a podcast.Thanks for any helpWalt

Are there some preferred settings that are ideal for his reduction from headset mic (Podcast) recordings? I am using the capture noise print, then applying the noise reduction/restoration (adaptive noise reduction) to the whole clip, but I can't seem to get good quality to come out of it. The hiss is reduced, but then the audio sounds very muffled and like there is distortion in the audio. Just wondering if there are some ideal settings or if I just keep playing with different combinations to get something that works well. Thanks,

Hi there,So I'm trying to explore the trial of the latest Audition. I'm running Sierra, the latest version - 10.12.1 - and I have iCloud Drive Documents and Data enabled. When I attempt to launch Audtion, I get an error because Audition cannot access the Documents folder. (Error message below). I think this is almost certainly due to the fact I have iCloud Drive / Documents & Data (which moves the entire Documents and Desktop folders onto iCloud, keeping it integrated with the Finder). I'm surprised I appear to be the only one with the error, but I guess maybe I'm the only one using iCloud Drive Documents & Data and Audition?Anyway. I've tried using symbolic links etc, or trying to edit .plists, but to no avail. Please help!!

This sounds like the basic answer would be... "turn off the keyframes or delete the envelope for volume" in order to bring the volume back for the rest of the track but here's the thing... ((i'll be super brief)) I was messing around with some settings within a plugin (iZotope Nectar 2) on my MacBook Pro (iOS Sierra), adjusting the keyframe points for various aspects of the effect in various areas of the vocal track.Then i noticed that only one part of the vocal track would play (a part i had applied a particular vocal effect to previously).So, I deleted every envelope and every key point in the track, bringing all the volume levels up again and restoring it to a normal audio track.So when I play the track without any effects, it's back to the complete audio file, playing from start to finish.But any time i add any effect to the track on any effect insert, it will only play audio for that part i had edited before. The rest will be silent.Is this just a glitch ?If there's no logical rea

I too have the waveform display problems mentioned, mine taking place in audition 2017. (Never had 'em in earlier editions) And I have been having a lot of crash issues as well. I work with AA on the left side of screen and the script from which I am reading on the right. If I punch in and do retakes, 50% of the time AA crashes. I wonder if these 2 issues are related. AS I said these are new. They never happened in previous editions.

Hi everyoneI'm a podcaster and I'm using Audition to edit my interviews. All was going well but in the last week things have gone awry!Two related but different problems. I do my interviews on Skype and record with e-camm. In the last week things haven't been working:1. open an interview in Audition and only one track/channel shows up (me) and not my guest. I sent my audio file to a colleague who opened it in Audition and both tracks showed up and played normally. 2. open another interview in Audition and both tracks show but my audio is only there for first few seconds, then nothing.Note: I've played these audio files in other programs e.g. QuickTime and Camtasia and both tracks/channels are there and play perfectly.So I deleted Audition and reinstalled but still the same problem.Has anyone come across this before and know of a solution?Fingers crossed someone can help me.Ciao, NKT55

I have an old record of my Grandmother playing the piano from 1937.  She is turning 100 next week and I decided to surprise her with a digital restored copy of her song. The piano is very quiet and there is a lot of static.  I have been sampling various static for removal (slowly chiseling away at about 4% every pass.)  It is sounding a lot better but still has a lot of static.  I know static is broadband and can be very hard to remove.  I would like to know if there is a way I could set some sort of filter for each piano key frequency, in turn I could cut out all of the other frequencies that do not fall within each key of the piano (hoping that the piano was actually in-tune in the first place). Then also be able to boost only those freqs. Like have EQ sliders for specific frequencies?  Thank you

I'd like to be able to do some scripting in Adobe Audition, similarly to how you can with Illustrator, Photoshop, After Effects. My thoughts are to be able to save a CSV file with a scratch track, then automatically generate multiple audio files using the new "Generate Speech" feature. I'd also specify the format, voice speed, voice avatar, output destination, etc. Is this possible? Command line option if not?Thanks!Bryce

When I with edit with the new Audition 2017 (downloaded yesterday), my wave form - where there is clearly audio (see spectral display), is missing.  i hear it fine, but it tough to edit without seeing!  It also happens in the smaller (master waveform at the top).  I've updated my NVidia driver, restarted etc.

Why do i loose so much upfrontness to my vocals after adding reverb? I do compression and eq before reverb...should i do that after to try and add the upfrontness back to the vocal with eq? I dont even really add alot of reverb, jus a small touch but it always pushes my vocals back really far. Any ideas?

I purchased my CS6 a few years ago I can not find my serial number under manage acount, invoices ets.  It was downloaded directly from Adobe on line so I do not have a product box.  Can anyone help me  tcrgiants@yahoo.com

​Hello! I have a big problem! I can't cope with it! The sound when recording in the program is obtained with the effect of barrel (boomy), how can it be edited? Thank you!

hi1)i have loaded an audio ,mp3 song in autidion2)insert into multitrack3) copyed the audio in track 1 and paste to track 2now the audio played different! even i haven't change anythingthe audio volume is increasedthe original songthe mixed audio of 2 original songis it normal or it 's a bug?can i avoid the increase of volume?in short work with the same audio copied on several tracks,without that audition change the volumethanks

How do I save my files when this is in the way.  There are NO unsaved effects,no "apply" to apply.

How do I force the selection marker to stay where I place it so that playback starts from that point again after it reaches the end of the track? Using headphones, I was trying to find the point where the track fades to silence with the volume turned all the way up. I'm used to Cool Edit Pro, and I didn't notice that the selection marker was moved without me doing it. When I pressed play a second time, playback started at a very high volume at the beginning of the track. My ears are still hurting and ringing badly 25 minutes later. I need to turn the volume up to figure out where to trim the track. How do I prevent the selection marker from moving and playback from jumping to a loud section?

hii haven't the time to update to audition cc 2017 , so i'm still running the last version of 2015i have installed the trial version of acon equlize and fabfilter  pro q2 (i guess the best equalizator according about what i have read)i 'm under multi tracki added both on rack effectsbut when i try to control the effect i can't find anythinglook the first screenshot , ok it's just a test , i know i have 2 equalizators on the rack just to make a testin the second screenshot , i try to control the equalizator with keyframe but i get this menuis the only way to control output level , right?can somebody tell me what's the meaning of in the second screenshot for band 6 Q ?? i haven't in the fav pro q2 preset

When an effect preset I had saved last year failed to show up in the effect today, I looked to see whether Audition's effects presets xml file had been changed. But the effect I saved is listed in the effect presets xml file, but it still doesn't show up.Why would this be? And how do I get Audition to "see" it again?This is CS6 on a Mac running OS 10.8.5, and the effect in question is Waves Gold Q10.

Hallo,ich habe das Problem das ich mit dem Pinsel in der Spektralfrequenzanzeige nicht mehrere sachen mit der Umschaltaste kopieren kann.Außerdem kann ich Audition auch nicht das Soundmodel lernen lassen.Gibt es da eine Lösung? Ich würde mich über eine schnelle antwort freuen.Ich benutze Audition CS6 gerade frisch Aktualisiert.Vielen dank schon mal im Vorraus.Michi

I'm a photoshop artist and new to Audition. I know there is a workflow for making non-destructive edits, but when I followed the procedures outlined in a tutorial, I was not permitted to export my project. I'm not at my regular workstation here, and going from vague memory. But what I typically have are birds/wildlife calls with a lot of environmental noise from my (H5 zoom) recorder. So I'm trying to isolate the wavelengths from the subjects, and filter out the various noise types. The supplied filters work well, but sometimes they affect the subject's frequency, so having non permanent layers, that be re-adjusted  (just like Photoshop) seems like the best workflow.Perhaps someone can briefly describe a setup for adding filtration to clips in a layered, non-permanent workflow. I'm not sure why I could not export the completed clips, but that only seemed to occur when I used the non-destructive workflow. Please excuse the vague terms, we don't have the app at this studio,Thanks fo

Running Audition on MacBook Pro + Yosemite - 2 yrs old.Can't seem to get Audition to run either using in-built device audio (stand alone on laptop)OR, now, with Apogee Duet interface (which was working before)I am unschooled in tech-speak, so please talk slowly...thanks in advanceAndrew

I've been editing several large projects in Audition over the summer and fall and have run into the same issue with Audition over and over again: it will randomly mute various clips in the multitrack editor. And I don't mean the files don't play any audio when I hit playback, I mean they are grayed out and actually "muted".I don't know how, I don't know why. I think that it might occur when I select something else to be muted. But I can't prove that, as it happens offscreen in a different part of my track, on random different tracks. Basically, any random file can suddenly become muted and the only way to know is to scrub through your entire project searching for grayed-out files. On any kind of large project (a feature film, like I was working on), this is insane.I'm so sick of this. Adobe, you royally screwed yourselves with your horrific update to Premiere, and Audition is just as bad. I've said it before during this summer, and I'll say it again: you have lost a loyal customer.I'm

Hello!  This is probably a pretty unusual question, but I was wondering if there's a way to export cue marker time positions out of Audition as an XML instead of a CSV file?   I realize there are online tools that will convert from csv to xml, but I'm wondering if an XML export is possible straight out of Audition.Thank you!

I was hoping this update would include a usable time stretch plug-in for speech.  Maybe I am missing something.  Cubase's Time Stretch is the best out there (better than Pro Tools etc.).  Here is an example of the 1) original file, 2) cubase time stretch (MPEX 4, Solo Musical) and 3) Audition (Stretch and Pitch, Algorithm Audition, High) from 10 sec to 8 seconds.  3 clips total on one file.  I experimented with all the settings (constant vowels etc., to no avail and the izotope plug in is worse it seems). https://drive.google.com/file/d/0B5wOQUg-jbhWY2dMbnBIZ1J1N2c/view?usp=sharing