Bridge

I have downloaded the output files and added them in in the correct places but the output option is blank. I tried to delete and reinstall Bridge and reinstall the output files but nothing makes a differencePlease help

Just jumped back onto bridge for the first time in a while. I noticed that the scrolling was really laggy and with no inertia, making it look to my client that i had an underperforming computer, very unprofessional. Also, the app doesn't seem to abide by Mac OS's guidelines for scrolling, in that you can't scroll the window when the app isn't in focus. For a file browser it's not really acceptable imo, I need to be able to browse file names and details while i have a note taking window open etc. The fullscreen button also doesn't follow system behaviour circa 2013. Is this on the radar? Seems like a really useful app otherwise, but your audience make their bread and butter off polish and attention the details. Thats what we trade in. I'd really expect tighter fit and finish on these apps.

Help!!! I need output back in my Bridge.

We have just switched to Windows 10 using Bridge 2017. At start up I build tools in the tool pallet that run fine. However when the button is pressed in that pallet it takes over a minute for it to open. We have played around a little with changing the directory of where it points too with no success. I am not sure of the root of my problem. All I do know is the biggest factor was the OS change. On Mac it runs fine. I don't get errrors just over a minute of down time.I would appreciate anything that would lead me in the right direction.Thanks Brett G.

I did my culling and editing in lightroom, then during export, the external drive somehow disconnected out of the blue.    Upon opening Bridge to see where the export left off, I discovered the the folder is now EMPTY.  I've purged cache, updated Bridge and searched online for answers - finding nothing.  PLEASE HELP.  I can't find a phone number for adobe and don't know what to do.****If I open my drive in finder and click on the folder - files are there.  NOT VISIBLE IN BRIDGE.Also, in LR, if I 'search for missing files' - it brings up my exported jpeg edited version in a different folder that I exported them too ....no sign of the RAW files.

HelloI am using Bridge cc 2017 on Mac. OS Sierra 10.12.6.After installing Output Module, Bridge does not start any more.I did uninstall and reinstall. No good.Please help.Thank youBeni

I have followed all the directions from Adobe.  I updated Bridge.  I found the extensions folder.  I moved the folders into the right places.  No output module showing.I went back to the path to check that everything was where it belonged, but now the Extensions folder is missing. What now?

Big Problem just started today. Oct 21 2017. Running Mac Pro Yosemite 10.10.5 EVERYTHING was fine in Bridge until today and I can't make it work. thumbnails load VERY slowly - NONE of the raw file thumbnails are showing the edit or crop icons (NONE meaning in all my folders ranging back to 2014 for any of my Canon raw files - 1Dx, 5DsR, 5d3 5d2) and none of the thumbnails sow any of the corrections (tens of 1000's of files) ... BUT ALL TEH FOLDERS have all the .xmp files in place with teh origianl raw files. Vertical (portrait) shots started truning horizontal in the thumbnails, then turned back to vertical when I launched Bridge again.When I open a folder to view the files within, the thumbs show and then go blank and Bridge begins building previews. With no xmp corrections. Camera Raw Preferences will not open. Regular Bridge preferences opens but NOT the Camera Raw Preferences. Its as if the camera raw moduel is missing.I have not done anything different from 3 days ago when I last

Hi thereAfter updating to 2018 my Mac extended keyboard forward and backward arrows are not working. Also, it seems that most of the menus are greyed out; creating a stack, choosing workspace, develop settings and many others. I am on MacPro Siera 10.12.3.

I can't click any directories on the left hand side of bridge. Restarting etc do not work, mouse functionality is overall broken.

The question says it all. 🙂Actually besides the answer to that I wouldn't mind if someone sent me a link to see the difference between the 2 as well.

Hi, I don’t understand what is happening, every time I open Bridge, it crashes!The first time that happened appeared a window that provides a text… something about the bridge’s cache. So I tried to clear the cache and then I updated Bridge but it’s still not working.Seriously, what do I do? It’s very urgent, I can’t work…Thank you very much!Carola

As per the title... does anyone know if there's a way of viewing Lightroom cloud synced pics in Bridge? THANKS

As suggested herehttp://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.htmlI downloaded and tried to install the Bridge CC Output Module. I could not find the "Bridge CC Extensions" folder only "Bridge CC"I can see the output name inside Bridge when I try to install it but nothing happens when I try to click it, it's just greyed outI using Bridge 6.0.0.151On OS X 10.8.4

Hi,I have a 21.5" Mid 2011 iMac that I want to install Bridge on.  I noticed that in the minimum system requirements, it says "1024x768 display with 16-bit color and 512 MB of VRAM" is required.  I know my GPU has 512 MB of VRAM, but I can't find anything on 16 bit color.  Does my iMac support 16 bit color?  If not, can I still use Adobe Bridge?  Thanks.

Dear Community,in our Photostudio we work with different Postproduction members and Photographer in a Local Folder.If I Mark images my workmates doesn't see them...any ideas how we can solve this problem ? Thanks a lot ! Ceyhan

On my laptop when I am deleting (red) or saving (yellow) on the left side of the screen it shows how many are in each category.  Then when I click on the delete box...that's what's deleted.  On my desktop, I went through a folder of 500 images...deleted what I did not want but could not see a panel on the left side showing unlabeled ...favorites or deletes.  Where is this and why are the two screens different.  Both have been updated

I have the latest version of Bridge and, to my astonishment, Output is STILL missing. Didn't this get figured out three or four years ago? I still have to add it back? What is Adobe's problem here? I know they are a monopoly and don't really have to fix anything, but this is an egregious omission even in that context. Will it ever just be a part of Bridge again at some point? What am I missing?MHBrown

Hello,I recently did clean install Windows 10 (1703) and Bridge CC2017 (7.0.0.93)only have software rendering option ticked and greyed out no matter what I did to solve this issue.Wierd thing is that my dedicated GPU is normally detected by Photoshop or Camera Raw, only Bridge does seem to have problem to with hardware acceleration.My system configuration :Core I7 3610QM, 16GB RAM, Nvidia Geforce 650M, SSD 840pro, Windows 10 (1703) fully updated.I tried:- set dedicated GPU in nvidia panel + set compatibility view- reinstalled nvidia drivers from newest 382 to 378.- reinstalled both Photoshop and Bridge several times- reset preferences- turn off all bridge scriptsEverything worked fine on Win 8.1....Please help!sniffer log :Tester="Photoshop"snifferStart="2017-07-16_13:38:54"AIFCoreInitialized=1AIFOGLInitialized=1OGLContextCreated=1NumGLGPUs=1glgpu[0].GLVersion="4.1"glgpu[0].IsIntegratedGLGPU=0glgpu[0].GLMemoryMB=2048glgpu[0].GLName="NVIDIA GeForce GT 650M"glgpu[0].GLVendor="NVIDIA Corp

I am trying to connect and write to a web app. I am wondering how to check if I loaded this correctly. I am using osx.

I've just installed the Output module into Bridge, and after getting the location for the workspace file wrong, I found the right location and it now, sort of, works... The only problem is, I don't seem to have any output options to compile them into a pdf...

Hi,I'm getting the I/O error on Windows 10 after installing the latest AOM for Bridge 2017. I've followed the instructions on the How to install Adobe Output Module in Bridge CC 2017 page and have confirmed that I have the correct and most recent version of the module.Any solutions or suggestions?Thanks

It is impossible to get the Output module to work!And yes, I have placed it in the correct Library folder. In fact I have tried to place it in any folder that I can find possible. If I place it in the user Library, at least it show up in Bridge, but I cant access it, nothing happens if I click on it.I have tried several times to uninstall Bridge and also manually removed every possible Preference file.I use Mac OS 10.10 and a swedish version of Bridge.A hint can be that when I install Bridge CC 2017 from scratch, I dont get an Extension-folder anywhere. Not in any Library.Help, Please!

I have installed the output module for bridge. When I am in bridge I can not even see it on the top bar. I use a mac I am working from a server Anybody has had the same problem?Thanks@

Clean CC installBridge 2017 or previous version (forgot what that is, 2016.3?)Sierra fresh install, fully patched.Login as admin user, Bridge shows the output panel.Login as standard user, output panel is empty.Yes, the files are in the right place (otherwise it wouldn't work for the admin)Even explicitly added RW rights for the user and "everyone" for the AOM and workspaces folder.All the usual reinstalls, resetting workspaces, deleting prefs, caches, app support folders haven't worked.Any ideas?