Camera Raw

Hi I have Photoshop CS5 which has version 6.7.0.339 of Camera RAWThis will not recognize RAW files from my Panasonic DMC FZ1000I have tried to upgrade RAW but having no luckIs it still possible?If so, could someone point me in the right direction?ThanksGraham

ich habe eine neue Kamera gekauft. Fujifilm X-T2. ich versuche seit längere zeit ein treiber zu intalieren. leider ohne erfollg. bitte helfen sie mir!

I have LR 5.7, which does not support Canon 80D raw files. Can I get an upgrade or will I have to purchase the atest (?) version? If I do, will the settings in LR 5.7 be lost?Bob

I have Adobe Photoshop CS2 installed on Windows 7 computer and a Canon EOS 550D camera. RAW filed are not recognised. Have downloaded Adobe DNG Converter but still a RAW file is not recognised. Help please!

I am copying b&w negs into digital with my EOS 5D Mark III and a canon 100mm macro in raw+jpeg. Jpeg is fine but raw is being cropped square. Help?

I was trying to use my ColorChecker Passport to work on my photos, but it needed me to upload a DNG file in order to get set. Now that I converted some photos to DNG, I'm unable to save my files as CR2 the way I was able to prior to converting one folder to DNG. Thanks in advance for your help.

Sony Image Data Converter opened and automatically associated with Adobe Photoshop.  But I cannot see how to associate the Sony ARW file type with Lightroom.  Any help out there?

Hi Folks,I have been trying to open Canon 7D CR2 raw files in Photoshop CS6 (Extended) (Windows 8.1) but I'm always getting the error "Could not complete your request because the file format module cannot parse your file". I installed the Camera Raw plugin ver 8.8.0.397 today. Did this initially by downloading and running the CameraRaw_8_8.zip available here Camera Raw plug-in installer. Still got the error.Went and did the Check Updates in Photoshop and updated the Camera Raw (and other components) but STILL cannot open the CR2 files.I can see the thumbnails in Bridge but when I double click to open them in Photoshop, same error.Cannot seem to get past the "Could not complete your request..." error.Any ideas?Cheers,Doug...

Hallo,ich habe folgendes Problem: Mit EOS D6 schwarz-Weiß Aufnahmen gemacht. Teilweise mit Rot- bzw. Blaufilter als Experiment. Wird in der Kamera auch in s/w angezeigt. Lade ich die Fotos über camera-raw, werden sie sofort in Farbe angezeigt. Natürlich dem Filter entsprechend in rot oder blau. Importauswahl in LR zeigt s/w-Bilder. Nach dem Import sind sie in Farbe. Kann ich mir doch gleich das Fotografieren in s/w sparen - will ich aber nicht.Freue mich über jede Erklärung und Hilfe.Danke Hanfbach

I have a new Canon EOS 5D Mark II and CS3, so I cannot view the CR2 files from the 5D in Bridge in their native format.  I read all the posts and upgraded to ACR 4.6, then upgraded the camera profiles to those in the ACR 5.2 package (the one that includes the 5D Mark II).I then read that I need the DNG Converter to generate DNG files from the CR2 files, so I have installed DNG 6.3.Problem now is that the DNG Converter will not recognize any CR2 files on my machine, neither the new 5D Mark II CR2 files of my old Rebel CR2 files.  When I navigate to a folder containing CR2 files with DNG it says "No images have been selected" in the "Select images to convert" section of the GUI.I have no idea what to do, I need to get the DNG Converter working to view the files from my new camera in Bridge.  Help!

Will PS work on my Mac as well as my Micrsoft Surface laptop?

I am trying to follow online tutorials for changing the background of a photo in Elements (I have 14) - to a plain background, for which I believe expert mode is required. But my question is about something more basic. Right now, the view choices such as the eraser tool, which the tutorials are saying to use, are not coming up on the left of my screen at all. How do I bring them back?

when processing Rawls files adjustments are not actively live, for example when I enlarge,rotate or adjust position of a raw image i move the sliders and release the click of the mouse (or raise my pen from wacom) and the image will not have responded until,I do so , so you can't position ,rotate ect... live you have to move in minor incremental steps and wait to see the result, when processing huge volume of raw files as I do this costs me hours and hours in production time , any one else having this problem ,or got a work around , no I'm not keen on reverting to previous version, I need an update or solution

Hi, I am running Photoshop CC (v 2017.0.0. 20161012.r.53 x64) and ACR 9.7.0.668 on Windows 10 Pro v1607. When I open pictures that have a color label ACR just shows a white label. Anyone else experiencing this problem? Any ideas how to solve it? Thanks in advanceOliver

Recently, while processing images in Adobe Camera RAW 9.7, a portion of the photograph that I am processing projects in the histogram panel. After a few seconds, the image goes away. During the same time frame, my computer (new and with plenty of memory and a great graphics card) powers down without warning.  Extensive diagnostics run by the computer manufacturer reveals no issues.  Please help!!!

PSDs exported from photos created by Photo > Photo Merge don't have a completely correct compatibility layer, causing InDesign to think that such a PSD is missing a compatibility layer. A user reports that having many such PSDs in an InDesign document causes it to slow down quite a bit, presumably because it is using a slower, more general code path to interpret the layers of the PSD.The cause of the problem is that, when exporting a PSD, LR fails to include a Version Info resource block (id 1057) with the "hasRealMergedData" flag. Normally, this doesn't confuse applications, since most exported PSDs have just the compatibility layer, and applications ignore the "hasRealMergedData" flag. But in the case of photos created by Photo Merge, the PSDs have two layers, the compatibility layer and a second layer containing the transparent pixels (compatibility layers can't store transparent pixels).  Because there is no "hasRealMergedData" flag, InDesign must assume there isn

in ACR I always make new standard settings for my (new) camera at every ISO the camera makes. So there's no need for me to adjust noise reduction every time. In case of a damaged folder I really like to know where this file is located. furthermore I can than duplicate the file and put it in the same place on my other computer.

Background:Hey everyone, I update my lightroom and photoshop cc 2015 now I have camera raw 9.7 which I believe is the latest one, after updating I am facing very annoying problem which wasn’t there before.Problem:When I use edit in photshop feature in LR. Photoshop open my file but when I save it, its reset all my adjustments in LR for that picture.My work flow:I usually make all my color correction and adjustments in LR on the copy of image which created when you do edit in photshop, and use photoshop only for skin clearness and dodge and burn etc but not color correction. Now when ever I save my file after dodge and burn or etc in photoshop LR automatically reset all my adjustment to 0. Its very very annoying since I like to work back and forth in LR PS.I checked the some problem is happening on my laptop and Desktop only after upgradePlease Please help mePortfolio: https://www.instagram.com/fadeenaeemphotography/

After recent upgrade of CC, the camera raw can't display image anymore, either jpg or raw files.Please help!Regards

Part of my workflow is to use a selective colour adjustment layer in photoshop to remove cyan from the red channel. However, I'd like to know if there is a way to emulate this kind of adjustment in Camera Raw. That way I could incorporate the adjustment into my camera raw presets and save a heap of time! Thanks for reading, hope you can help!

ACR Prophoto 16 bit  vs Photoshop Color settings set at default, not including Prophoto RGB and profiles mismatches enabled.After Raw process the images appear to have a smaller color space when opened in Photoshop.Under Photoshop if the image is opened under camera raw filter, it expands its "color space"It goes back to the reduced "color space" once the raw filter editing ends.Custom Camera Profile with color checker passport at 16 bit with Prophoto RGBWhat needs to be adjusted for "color space" consistency?73

Hello,I have created a number of Lightroom presets that I would like to use in ACR.I can convert the presets to ACR easily enough. But, when I go to save the converted presets as ACR presets, the Gradient and Radial filters don't save with the preset. So when I then go to use the ACR preset, neither the gradient nor the radial filter gets applied and, therefore, the resulting adjustment is different than it would be in Lightroom.I've also noticed that you can save the settings of an individual filter but not actual pinpoints that determine how the filter is applied to an image.Is this a problem or is this the way that the presets in ACR are intended to work? Is there no way to save the Gradient and Radial filters in ACR?And, if this is the way it works, can I ask for an enhancement to add this feature? If Lightroom can save the filters with presets, it wouldn't seem a stretch to expect ACR to be able to do the same.Or am I just missing something and there's a way to save the filters th

I am having a problem with my adj. brush in photoshop raw.  I am able to brush over a image and get a white line, but I can't get any of the sliders to work to make adjustments. All the other tools work fine.Density and flow are all the way upI have CC2015.5 and just upgraded to CC2017 and still have the problem.Does anyone know the problem?Tony In Corona Ca.

I am having a problem with my adj. brush in photoshop raw.  I am able to brush over a image and get a white line, but I can't get any of the sliders to work to make adjustments. All the other tools work fine. Density and flow are all the way upI have CC2015.5 and just upgraded to CC2017 and still have the problem.Does anyone know the problem?Tony In Corona Ca.