Camera Raw

A lot of my images have been opening sideways recently and its killing me cause I can't find the rotate option. Apparently I am suppoesd to be able to press 'R' or 'L' to rotate my image but that does not work. I cannot find a tool or button to rotate manually either. I opened this Camera Raw from Photoshop 22.5.6 and running on Windows 10 if that matters. I opened Camera Raw through Filter > Camera Raw Filter. 

My primary camera body is a Sony A7Riv. I shoot exclusively in uncompressed RAW. The other day, I began looking at and working with some ARW files shot with that camera in the latest Lightroom Classic (12.3) and Adobe Camera RAW (15.3) versions. I normally work in Capture One Pro. When working on the images with Lightroom and ACR I very quickly noticed that the images seemed to have strange noise and artifacts in them. In addition, the photos were generally just generally noisier/grainier in Lightroom than in Capture One Pro. I would have written that off to different default noise reduction defaults in the two programs except for the strange textured noise artifacts that I mentioned above, which seems to point to something else going on. And under any kind of sharpening, it gets much more pronounced. I've noticed it most in skin in the mid-tone transitional areas, but it is present in all areas, including as noise in solid colour areas. I've run lightrooms new AI noise reduction on it

Hallo,ich habe gerade auf Photoshop Elements 2024 upgegradet, da meine neue Kamera nicht mehr mit meinem alten Photoshop Elements 2018 unterstützt wird.Ich habe das Camera Raw Plug-in installiert, aber in der neuen Maske fehlt bei "Grundeinstellungen" die Option "Neue Camera Raw Standards speichern". Das hat es mir ermöglicht, das nächste Bild wieder mit den gleichen Voreinstellungen zu öffnen. Die einzige Möglichkeit, die ich jetzt zu haben scheine ist, auf "Vorherige Einstellungen anwenden" zu klicken. Das würde aber bedeutena) dass bei jedem Öffnen einer neuen Bilddatei ein zusätzlicher Klick erforderlich ist, oderb) dass Einstellungen angewendet werden, die ich beim neuen Bild nicht haben möchte.Ich würde aber gerne wie bisher diverse Grundeinstellungen wie Kontrast, Lichter, Tiefen, Sättigung, Rauschreduzierung standardmäßig einstellen, damit ich nicht jedes Mal alle diese Schritte wiederholen muss. Dies würde meinen Workflow erheblich erschweren. Außerdem müssen die diversen Opti

Hi TeamCamera Raw V16.2.0.1763 keeps freezing while editing. Any ideas what it could be and how to fix them. I have already gone into Camera Raw setting and delete the Camera Raw preferences.  Windows 11 64bit  Processor:       AMD Ryzen 7 5700X 8-Core Processor, 3401 Mhz, 8 Core(s), 16 Logical Processor(s)BaseBoard Manufacturer:      ASUSTeK COMPUTER INC. BaseBoard Product:    TUF GAMING A520M-PLUS II BaseBoard Version      Rev X.0x Ram: 32 Gb  Regards Alan

Hello! I have a very old graphic card (yeah, I know ...) and I saw that with Camera RAW 16 the option to set "Use Graphics Processor" to Off is no longer available.I was wondering if anyone found a workaround for this.Currently I use a standalone Camera RAW 15.5 installer, but I would very much like to use the new features of the version 16 on my old laptop.It is not possible now to use it because the version 16 available settings are only Custom and Auto.In Custom, both options are grayed out, unaccessible.I know there are others who encountered this problem and I thought I might ask for a solution.The model of my graphic card is in the print screen attached. The OS is Windows 10.Thank you!

When I open camera raw, there is no menu at the top.  I've reinstalled camera raw and I am using the most recent version (14.2).  I can't find anything in the settings that shows/hides the menu.  This means I can't crop or straighten my images.  I'm at a loss as to what do do.  Any help would be appreciatd.  

Recently I updated Camera Raw to the new 16.2.1 version. Since that moment I can add one single mask, but after the first mask, I can't add any other or change the mask once I finished it.  The buttons on the screen simply doesn't work anymore afther the first mask. I still can use the keyboard combiations to add a linear gradient, radial gradient of the bursh. But can't click any other.. even the 'add+ / subtract-' doesn't do anything:( Anyone got some suggestions??

Windows 10, Br 14.03.200, ACR 16.2.1.1767, Ps 25.6 Perhaps I missed this default behaviour change ... but when I open a single RAW file as a Smart Object using ACR from within Bridge the image file name gets appended with a "-1". If I close the image from Photoshop (without saving) and then reopen the same file as a SO from ACR it then gets appended with "-2". Repeating the same routine (open as SO from ACR, close without saving in Ps, open as SO from ACR, close without saving in Ps, ...) results in progressively higher numbers being appended to the single file being opened (img1928-1, img1928-2, img1928-3, img1928-4, img1928-5, etc..). Has this behaviour been "normal" for a number of Ps, Br, ACR versions and I'm only now noticing?? Is there a preference to disable this behaviour and so a single image opened as a SO will use only it's original file name without any added integers (I've not found it if it exists)? I understand that opening multiple copies of the same file

 Cuando abro una foto desde Bridge a Cámera Raw y desde esta a Photoshop, si éste no está abierto se abre pero la barra de herramientas  no tiene iconos, solo los puntos que hay al lado.Si Photoshop está abierto cuando abro la foto funciona bien

Ich habe Probleme beim Vorschaubild in der Entrauschen-Funktion. Dieses wird nur sehr stark verpixelt dargestellt und Veränderungen sind überhaupt nicht erkennbar.Ich habe bereits eine Neuinstallation durchgeführt. Dies gab aber keine Verbesserung.

Hallo.Camera RAW 16.2.1 (MAC) bringt unter "Optik" die Fehlermeldung "Passendes Objektivprofil kann nicht automatisch gefunden werden" Dies betrifft die DNG RAW Dateien des Apple iPhones 15 Pro Max.Die Objektivinformationen zu 13 Pro Max sowie Canon 5D werden automatisch gefunden und angezeigt.In der manuellen Auswahl kann man die 15 Pro Max Einstellung finden, macht aber keinen Sinn. An den Exif Informationen kann es nicht liegen, die sind z.B. in Bridge komplett und korrekt auslesbar.Ich arbeite mit MAC, Reset mit Taste "Option" und PS Datei>Voreinstellung->Camera Raw habe ich gemacht. ohne Erfolg. Rosetta ist nicht aktiviert.Hat jemand einen Tip?Andreas

Hello, After camera raw changes saw that show up strange white line on subjectSame problem with another subject as wellCan not remove it with any healing toolMaybe because using camera raw in very end of retouching?Please let me know if you have any ideas 

New Denoise feature causes Lrc to forget the Manual Noise Reduction and Grain settings. They are reset on the newly created DNG file. I have to re-adjust the grain after using the Denoise feature. Normally it should remember the grain setting at least. I'm also leaving some noise intentionally, for the AI not to ruin the faces and people, so I add the noise reduction manually. But Lrc forgets my settings and I have to re-adjust them again as well.

Hello together,  after having used the test version von PSE 24 with CR 16 in January I decided to buy a full license for PSE 24. I just installed PSE 24 and the CR 16 yesterday and it says "Camera Raw erfordert eine GPU-Beschleunigung, um Bilder bearbeiten". I tried to fix the problem with help of Google. But none of the possible solutions being discussed in different topics worked so far. So is there anybody out there who could help me? Which infomation do you need? Thanks in advance.  KRMatthias 

Hi all.This action is more for evaluation purposes.Usually, to do this, I take an uncropped image and look at it through a hole in whatman paper. But I am a little surprised by the fact that I cannot do this with 21st century tools. I cannot find any key combinations (or such an action is not provided at all) to enlarge or reduce the image inside the cropped area. Of course, you can simply enlarge or reduce the image in the editing tab, but this is not always the case, since the aspect ratio may be completely different from that of the program’s viewport window.With the cropping tools, I can, of course, do something similar, holding only one of the sides of the borders, but this is the image:1. Shifts to one side.2. It will become smaller (relative to the entire viewport/window) and it will be more difficult to accurately see the picture in order to more accurately evaluate it! correct boundaries. You will need to switch from the cropping tab to the editing tab, and then retu

I want to convert a folder full of HEIC files to JPEG and I was hoping Bridge could do this as a batch process.I am getting the following error message in Bridge (which spawns Photoshop CC in the process) when I try to open an HEIC image file:"Photoshop Camera Raw does not support HEIC files on windows". The Adobe Help page titled HEIC and HEVC media files support in Lightroom and Camera Raw says:"In the Camera Raw Preferences dialog box, ensure that the JPEG/HEIC field is set to either Automatically open JPEGs and HEICs with settings or Automatically open all supported JPEGs and HEICs. To access Camera Raw Preferences, click the Open Preferences Dialog button  in the Camera Raw dialog box." Whether from Bridge or PS I do not see the above text in my Camera Raw Preferences dialog box even though I just updated LR Classic CC, PS CC 2019 and Camera Raw this morning. Camera Raw Prefs ver 11.3.9.197Bridge ver 9.0.3.279 x64Adobe Photoshop Version: 20.0.4 20190227.r.76 2019/02/27: 1205

Computer: iMac (Retina 5K, 27-inch, Late 2015)OS: Monterey 12.7.3Camera Raw: 16.2Adobe: 25.7.0Bridge: 14.0.2.181 It's 100% occurance. Only Adobe Beta and Bridge are open. Maybe email, maybe a website. Normal usage. I open image, click 'denoise' and without adjusting I accept what it offers, I think the setting is on 50%. I click Enhance. The computer starts to go into noisy smokey machine, it get louder than a washmachine. Then screen goes black. After few seconds of the black screen - silence. It's like when you do a hard shut off while the computer is running on maximum. Defeaning silence. Hit keyboard and you get the login screen. I login - everything opens, photoshop is there, camera raw is there, the enhancing is in progress still. That. Happens. Every. Time. That's how it goes.  Any ideas how not to destroy my computer using AI Denoise? 

I'm trying to static compile XMP Toolkit SDK in XCode 15.0 of macOS 13.5, it reported the error:unable to find sdk '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.1.sdk'Could anyone give me some suggestions to solve this error? Thanks in advance!

Hi all,Adobe DNG Profile Editor does not work on my computer.My OS system is Windows 10 64 bytes. I downloaded Adobe DNG Converter to convert a Fuji GFX RAF file as a DNG file. The conversion worked fine. Then I opened the DNG file with Adobe DNG Profile Editor. When I click (right button) on an area of the image, the adjustment of the image works fine, the pixels colors RVB values are displayed in the RVB panel, but nothing appears in the List box on the right side of the Color Tables pane and Hue, Saturation, Lightness tools are not active (disabled).Has anyone ever had this problem?Regards. And excuse my poor English.  

I spent several hours with a Senior Technician a few weeks ago while he checked my computer. He told me immediately there was an known issue with Camera Raw and PhotoDownloader and the new Nikon Z8. After remotely checking everything, he again said it was a known issue and that engineering would be working on it. Some of the issues included more than one Z8 was detected and portrait inages (vertical) would download in black and white thumbnails. Some images would be completely missing.  Unfortunately, the only thing I am seeing fixed  with Camera Raw 15.5 is that only one Z8 is now detected and half the vertical thumbnails  are now in colour. (The files themselves are fine as they download). What I am concerned with are the missing images. They are on the card and if downloaded directly from the camera, they are there. They are not all appearing in PhotoDownloader.  This presents a real problem for my work. Is there anything else I should be looking at to fix t

Sonoma 14.4.1 / Photoshop 25.6.0 / ACR 16.2 Scanning images and then merging in ACR into single large page. First went normally Second time pulled up the merged image from the first time. Terminating PS and remerging resulted in the first image again.

J'ai téléchargé les version 212 et 16 et lors de l'installation les fichiers défillent (donc s'installe) mais pas de changement sur CS6 ni dans l'écran spécifique Camera raw ni dans le menu CS6Que faire pour que l'installation soit opérationnelle ?? Merci d'avanceGilbert L

Hi all, When I try to open a raw file (Nikon NEF) into ACR from Bridge 14.0.2 I get the attached error. Adobe support has tried many things, uninstalling/reinstalling Briddge, resetting preferences but nothing worked. They tell me it is a permissions issue. However, it works fine in Bridge 12.0.4. It stopped working from Bridge 13.Double clicking on the file opens it in ACR, so I can't see how it is a permissions issue.I note others have had the same issue. I am running Win 10, latest version, PS latest version and latest version of Bridge.  Any ideas?Not a major problem, as double clicking on the file opens it in ACR. It is just that is a feature is in the app, it should work. Regards, Steve