Captivate

Hello Is it possible to have a voice over attached to a rollover caption, so when a user rolls over a rollover caption, a voiceover is also triggered?  Thank you,Jess  

Hi. I would like to hear experiences of Captivate users with the new mac m1. Thank you.  

I don't know why I can't see a list of SVGs to choose from. This is rediculous.

I'm creating an eLearning video.  Closed captioning text and aduio has been added for all slides and for a quiz.  However, the CC won't show in the quiz.Did I forget something?  Text was added to the CC and Synced; but when I view the project, the CC doesn't show in the quiz.  It does appear for the rest of the project.Thanks in advance.

Good day everyone. Our client has requsted that once module is completed, learner  should not see results. Message, should be something likeWell done, you have completed module 1or Please try again Is it possible to hide results in Captivate?? We have done various optionsIn Quiz settingwe have deselected  Show at the end of quiz In publish Scorm settingDisplay score  is No We have discussed this with World Manager IT support, and apparently this is a Captivate setting, and they cannot hide the score Any suggestions? Warm Regards, Shona   

Hi all, My work has a licence for Adobe Creative Cloud 5.4.550. I currently have Captivate 9 installed and want to upgrade to 2019. Does anyone know if my work licence includes the upgrade to 2019? When I click "Check for Updates" in Captivate, it says its already up to date. Cheers for your help.-Adrian

I'm making an interactive video using software simulation mode, and in the video I need to have a scroll button that users can drag from the left of the slider to the right, but Captivate didn't capture the action and there wasn't a scrolling item shown that I can drag. Can anyone help to solve the problem? Thanks a lot.

Is there a way to edit the Toolkit text that appears on hovering over the TOC & cc buttons? If TOC were to be shown as Table of Contents & CC as Closed Captions, does Captivate 2019 allow this to be modified?

HiI have a single slide Wordserach Interaction which in preview (HTML) works fineWhen I try and publish to my local PC to check it fails to display the interaction - any suggestions would be great I am trying to show my company a little showcase of Captivae (2019) to get them to sign upThanks in advance Richard

I have a 4:30 minute slide video with captions. The captions do not sync up approximately 1 minute into the video. I have tried adjusting through the "Edit video timing" tab, however it does not appear to save my edits and the captions continue to be out of sync. Any suggestions on how to fix the issue or what I may be doing incorrectly? Thank you. 

Hi thereI have a quiz with 5 attempts set up. Captivate 2019 and SCORM 1.2. I can use my 5 attempts when I use the Retry Button on the Results slide, but if I use the Review Quiz button when I review and then reach the Results slide I cannot see the Retry button anymore.It has been some time since I have  used Retry button inside Captivate. Is that behaviour normal?Thanks in advanceBobby

HiCan someone help with my problem of using last attempt?I'm creating software simulation in Captivate 2019. For some text entry boxes, I want users to try maximum 3 times. If users reach the max attempts, the slide should continue.I have unchecked the "Infinite Attempts", and changed "last attempt" to "go to the next slide" (I also tried the Continue action). For the setup, please see the attached image.But when I preview with HTML5 in browser, it's not working. After 3 attempts, the slide cannot move to the next. For the further attempts, only failure text will not show; nothing happens.I also published the simulation, and put it on GitHub where we will host this video. When previewing in GitHub, the last attempt action (either "Continue" or "go to next slide") is not working too. I'm not sure if I made something wrong. Any help will be appreciated.

Hello, Our organization recently decided to migrate our captivate catalogue from a Shared Drive to our new Cloud AEM Intranet. The problem I'm having is that when the test user clicks the link for the training the browser downloads the HTML file instead of opening it. I'm getting this behavior in Chrome and Edge. I feel like I had this problem before when I was trying to migrate to SP but i don't recall. Does anyone have Expereince with this? thanks,

I'm working on a memory game using advanced actions. I have managed to create items, make them flip (applying effects), create variables, and make them change their states when clicked. However, I can't figure out the advanced actions to check for pairs matched and shuffle items when a game restarts. Has anyone done this using advanced actions? or maybe advanced actions and javascript? 

Hello!I have an issue that I am trying to figure out.  I have a project where the user has three attempts to pass the quiz that is integrated within the course with a 62%. So I first started by setting the quiz completion criteria. However, we ran into an issue where if the user did pass the right number of questions, ( answered 10 out of the 16) and then closed it out before finishing the course it counted it as completed since they technically got a 62%. So then I added in slide views.  Now I am having an isssue where it is setting it as completed with whatever score they have because they are viewing all the slides.  Any ideas on how I can make this work?? 

Hi, I am using Captivate CC. I am trying to design a drag and drop interaction with the following filters:1. No Submit button2. When user drops a drag item in its correct location, it locks the drop location.3. When user drops a drag item in an incorrect location, it does not lock the drop location.4. For the drag items dropped in incorrect locations, user should be able to redrag them until all of them are in correct locations.5. Once all the drag items are dropped to their correct drop locations, the feedback is shown. How can this be achieved? Anyone please help?

Hey everyone,I have an interaction that I need the button to appear only after the whole audio has been played. I tried looking for an answer and I can't find anything. Any suggestions are greatly appreciated!

Hi,I have 4 tab interactivity with respective audiosI have also introduction audio befor Interactivity startsNow I want to disable Next button till all audios of popup gets completeOnce user listen all audios till end next button will get enable. Could you help out in this.

On a windows PC, CP version 11.5.5.553I do Media > Video > Slide Video > Vimeo insert my link and Captivate just hangs on the "Loading Video" Screen at 50% Please fix ASAP or tell me how to get around this. Videos MUST be hosted on vimeo. I also tried with an interactive video and get the same issue. The vimeo link is valid.

Good day all, Thanks for all earlier support, itssolved our problem. Last challenge.Our END project button takes participant to blank page image with small text"Thank you for exiting the content. You may now navigate awayfrom this content" There should be an LMS system FINISH BUTTON in the LMS system top bar.Is this a Captivate issue or a LMS system issue.How can I solve?? Thanks so much, Shona

Hello, I am facing problem in simple drag and drop. all objects hit area is in square format, so there are no accuracy of object in different shape, please check attached video to better understand.

I'm new to Captivate! Really just subscirbed for the 360 capabilities. I built this tour, however I noticed the buttons I created (info, home, etc.) don't function on certain browsers. It works on Google Chrome, Edge, and Internet Explorer on Windows 10. It does not work in Google Chrome for MacOS.  Any assitance will help!  Link to course (hosted on AWS for now): https://storey.s3.us-east-2.amazonaws.com/content/East+Bethel+Elementary+School/East+Bethel+Elementary+Tour/index.html Here are my publish settings:   

Hi.  I am relatively new to Captivate.  I am on Captivate 2019 11.5.5.553.   I have a few knowledge check questions in my course.  I also have a quiz at the end which gives the user 3 attempts to correctly complete.  If they fail all attempts, it takes them to a slide that says they failed and displays a button to retake the course.  The button has an advanced action that takes them back to slide one and uses javascript to reset the quiz data.  This part works fine.   The problem comes in when they start retaking the course and come to the slide before the first hot spot knowledge check slide.  This slide has a next button set to go to the next slide.   Only, it doesn't advance to the next hot spot knowledge check slide, no matter how many times you click the button.   Through various tests, I have deducted that it is a problem with the hot spot slide.   Has anyone had this problem and successfully bee

Hi,Trying to play and view SCORM compatible files exported from Adobe Captivate 8 and 9 in Success Factors LMS.I get the message - 'ERROR – unable to acquire LMS API, content may not play properly and results may not be recorded. Please contact technical support’ I have tried SCORM versions 1.2 v3 and 2004 V2 and V4.  We can view the content, however it does not track, show as complete etc.We are just in the process of implementing Success Factors and are a bit stumped.... Anyone experienced this problem before? Or know of a fix?Many thanks

Hi there,  My team is looking into purchasing more Captivate licenses. Will multiple staff with licenses be able to work on the same project? For example, is there shared space to store shared projects and have multiple staff edit them? Thanks, Kelly