Photoshop

When I try to use the function “ Select > Subject” on v26, the software will select the object from the background on the image with out any issues.however the exact same function does not work on v27 and pop up a warning saying on subject can be found no matter using the AI function or the basic one to achieve the same goal.

Opened image (TIFF or DNG) via LightRoom ClassicDuplicated layerOpened new layer in ACRSelected Remove toolSelected remove PeopleTwo people selected, one of which I did not want to removeCursor changed to Zoom toolUnable to exit that Zoom mode to select the person I did not want to removePressing H to change to Hand tool did not helpSeems there is no way to deselect the selected peopleTried restarting PS; rebooting computer..  no joy in MudvilleWhat _did_ work was from the main PS window, was to select the distracting person via the lasso tool and use Gen AI to remove with the prompt "remove person".####Mac OS Tahoe 26.2Mac Studio M2 MaxPS v27.11ACR v18.7

Since a short period I have the an ‘unwanted’ effect in Photoshop.When an image is on screen,  I regularly want to adjust the image borders (I mean the borders of the screen that holds the image) to reduce that screen with the image. During this action, the image itself also gets temporarily smaller and afterwards retakes its original size on screen. I’m losing time with this effect and it is also disturbing.I would like to know how this effect can be switched off.Adobe Virtual Assistant suggests I should deselect the Resize Windows To Fit option, or that I should deselect the Zoom Resizes Windows option, but this doesn’t work.So which Photoshop option would control this effect?

ACR 18.6  / Mac Studio Tahoe 26.7Trim and generative expand applied to image. Additional edits caused them to vanish.Edits such as profile change and glow each reversed the Crop & Expand edits.

In Photoshop 27.9.1 the image preview in Export As looks like a chunky mess even at 100% and when the export image isn’t being scaled, as if it’s taking a smaller image texture and scaling it back up with a fast/nearest-neighbor type algorithm... it does not match the original image. This also makes it impossible to judge the Resample mode (Bicubic, Bilinear, etc) when you ARE scaling the image on export, because the preview has no relation to the actual resulting saved image.I downgraded back to 27.8.0 and it works fine again.Windows 11 25H2, nVidia 3080 Ti on drivers 610.88 (GRD)Here is a screenshot showing the document at 100% in Photoshop with the Export As window open below it. Hopefully this image gets attached untouched/unscaled (original is 2603x1347)This may or may not have something to do with being on a high-res monitor (3840x2160) in Windows with its interface scaling active (150% in my case) as I looked at PS 27.9.1 on a different machine on a standard res monitor with no

Photoshop crashes on resume from sleep when network connectivity is enabledSummaryPhotoshop consistently/regularly crashes when Windows 11 resumes from sleep, but only when network connectivity is enabled.The crash occurs even before logging back into Windows in some cases. Photoshop is otherwise stable during normal use and does not crash during ordinary network activity.I have traced a crash dump with WinDbg. The crash is a C++ exception originating in Photoshop's bundled msvcp140.dll, and the call stack shows Photoshop interacting with the Windows Network List Manager (netprofm) through COM/RPC during a network connectivity-change notification.This strongly suggests a Photoshop bug in handling Windows network interface/connectivity notifications during or immediately after resume.ReproductionStart Windows 11 normally with Photoshop running. Put the PC to sleep. Wake the PC. Photoshop crashes during/after the network interfaces transition back to their connected state.The behaviour i

View > Flip Horizontal now flips not only your canvas, but the entire photoshop viewport, causing my canvas to jump a huge distance when I use it (unless my canvas is lined up perfectly in the middle of the screen, which it almost never is).   I was forced to spend my morning un-installing and re-installing older versions to try to find the working version I had been sitting on for a long time (22.4.3) which has the correct functionality for View > Flip Horizontal -- the canvas flips visually in place, without jumping across the screen.   Please, PLEASE fix it. I am paying for an expensive Photoshop subscription and I'd like to use new features, but I can't when necessary functionality is broken in new updates.

# Generative Remove runs on the CPU instead of the GPU since version 27.9.1**Issue summary**Since updating to Photoshop 27.9.1, the Remove tool in Generative mode loads about 6 GB of data into the graphics card memory, then performs the actual work on the processor instead of the graphics card. The graphics card stays at idle power for the whole operation. A removal that used to complete quickly now takes several minutes.**Product and version**Photoshop desktop version 27.9.1 (build 20260803.r.1 65900e1)**Last version where it worked correctly**Photoshop 27.8.0 (build 20260610.r.13 4081857). The problem started immediately after updating on 6 August 2026.**Operating system**Windows 11 Pro, version 26200**Hardware**Graphics card: NVIDIA RTX PRO 4000 Blackwell, 24 GB, driver 32.0.15.9672Processor: Intel i9-13900K (32 logical cores)Memory: 128 GB**Steps to reproduce**1. Open any photo.2. Select the Remove tool.3. In the options bar, make sure the generative mode is turned on.4. Paint over

I reinstalled the previous version from the Creative Cloud app and that still works.Event Viewer shows the following:Error      2026-10-04 12:17:14        Application Error              1000       (100)Faulting application name: Photoshop.exe, version: 27.10.0.26, time stamp: 0x6a8ca25fFaulting module name: Photoshop.exe, version: 27.10.0.26, time stamp: 0x6a8ca25fException code: 0xc000001d  

Hello Adobe Photoshop Team,I am experiencing a serious performance issue in the latest version of Adobe Photoshop while designing photo albums.My workflow is very simple:1. I create an album layout/document in Photoshop.2. I drag and drop a photo directly from my drive into the Photoshop album layout.3. The photo is placed correctly on the canvas.4. When I press Enter to confirm the Transform operation, Photoshop takes approximately 10–15 seconds to complete the operation.5. During this delay, Photoshop becomes unresponsive/very slow before completing the placement.This happens even when placing just ONE photo at a time.The important point is that this problem does NOT occur in an older Photoshop version. The same computer, same type of album workflow, and same type of image work normally in the previous version.Important Version-Specific Finding:I have tested the exact same workflow on different Photoshop versions. Photoshop 27.9.1 does NOT have this issue — images are placed and the

GPT Image 2.5 Flare and Sunburst models are not working inside AI Assisted Editor (Something went wrong. Please try again later error), all other models are working fine. The models work fine on firefly web, the error only happens on the AI Assisted Editor inside both Photoshop and Photoshop (BETA).

Photoshop cannot open TIFFs without crashing — this needs engineering attentionEvery TIFF I have tested opens in Camera Raw—even with TIFF handling disabled—and Photoshop crashes when I choose Open, Done, or Cancel. This affects both regular Photoshop and Photoshop Beta on my machine.My configuration: Photoshop 27.10.0; Camera Raw 18.7, build 2743 MacBook Pro, Apple M1, 16 GB memory macOS 15.7.5 My processor, memory, and operating system meet Adobe’s published Camera Raw requirements. Updates, reinstalls, preference resets, and the suggested TIFF-handling and GPU workarounds have not resolved this.On September 15, an Adobe community manager acknowledged an investigation into Photoshop 27.10 unexpectedly routing TIFFs through Camera Raw despite TIFF handling being disabled. That acknowledgment concerns the TIFF-routing behavior; my additional failure is the crash when leaving Camera Raw.Please escalate this to engineering and provide a tracking reference, an actionable workaround or

Issue: Photoshop 27.10 becomes extremely slow during normal use, especially when brushingPhotoshop version: Photoshop 27.10 OS: macOS Tahoe 26.5 Mac: MacBook Pro 14-inch, Apple M4 Pro, 48 GB RAMSteps to reproduceOpen a project with multiple layers and adjustment layers. Work normally and use the Brush tool. After working with several layers, Photoshop becomes progressively slower. The Brush becomes extremely slow and delayed. When editing the mask of an adjustment layer, other masked adjustment layers blink in and out.Expected resultPhotoshop should remain responsive during normal editing, with normal Brush performance and stable adjustment-layer rendering.Actual resultPhotoshop becomes very slow overall after working with several layers. The Brush becomes particularly slow and delayed.Masked adjustment layers also blink in and out while editing another adjustment-layer mask.The MacBook becomes noticeably hotter while this is happening.Additional informationThe Brush issue was first no

After upgrading to 27.10 the crop with Generative Expand co longer works. If I select a crop and go beyond the image, even tough I have Generative Expand selected on the toolabar the new area is rendered transparent.  If I then subsequently just select the area ans use Generative Fill, that works - but I shouldnt have to !!!  Can we expact a fix anytime soon ??? I’ put a little pic below - I would post a little video but not sure how to upload it to hereBTW can we please have the ‘check mark’ and  the ‘discard’ icons back on the crop toolbar - its a right pain putting down the mouse/stylus and having to press ENTER or ESC when before we could just do s imple click to confirm or discard. 

The Sky Replacement tool on my Windows 11 (25H2) PC was working perfectly up until I update Photoshop to version 27.10 .0 three days ago.Selecting Sky Replacement in the Editor (Edit » Sky Replacement) is OK and all my skies appear.When I select a sky, I find all of the sliders and functions, except Brightness function perfectly.The Brightness slider can be moved to both extremes, but no change in Brightness materializes. I have performed a clean instal of Photoshop, without effect (Uninstalled PS with Revo Pro Uninstaller, and thereafter deleted every Adobe folder I could find).Even performed a clean reinstall of the Windows operating system.Finally, I restored my system, from a Macrium Reflect X to a state prior to the Photoshop to version 27.10 .0 update. Low and behold - the Brightness for Sky Replacement works.It looks like a Bug, to me.Appreciate any comments/adviceBrian 

Importeren en openen van C3 raw image vanaf Canon R6 mark III werkt niet in Photoshop voor ipad (7.8.2). Krijg melding dat er een probleem is opgetreden met de module interface. C3 raw images afkomstig van Canon R5 doen dat wel.In Lightroom voor ipad werkt alles naar behoren….ook voor de Canon R6 Mark III. 

When using the “Remove” tool in Photoshop 2026 (27.8.0) on Windows laptop I receive “Tool is not responding - check internet and try again later” error.  Internet is perfectly fine however it does this about 10mins and then works for a bit.

After the latest update, Photoshop (27.1 /win 11) started showing a very unpleasant bug.As soon as I open a PSD file, without doing anything (just by selecting a few layers), the fill content of several "fill layers" changes automatically.This happens with simple "Shape layers", rectangles.See my history state without doing anything elese but selecting a few layers in the freshly opened PSD:   For example, a layer that originally had a black fill suddenly has a gradient applied. In another layer with a gradient, the orientation gets flipped by 180 degrees.It may seem random, but I suspect the "shape layer fill" is automatically set according to the first selected layer in a row! In any case, it completely ruins the opened document. I can re‑set the layers, but the same thing happens again the next time I open it.   It’s extremely frustrating — basically, it makes the program unusable! I might try downgrading to a lower version to see if that helps. Please fix this serious issue ASAP.

I’m using web Version: 2026.19.1.0. Curves all of a sudden stopped working. Adjusting by points is completely unresponsive. Using the draw tool still works. Wanted to create a separate thread for this since I am using web but was unable to. 

Photoshop Version 25.11.00Windows 11 ProVersion 23H2OS build 22631.4037My library panel continuously resets to the front panel (not my library) and I keep running into a prompt to add libraries to my adobe apps, followed by a pop tutorial that doesn't obey the "skip" command. But my libraries are already defined as well as my workspace. It's hard to say what causes it or when, it just seems to happen often and randomly. Instead of showing the color palettes of "my library", it defaults to the previous screen showing all libraries and presents this popup for "add libraries". Attached is a screenshot of the panel that pops up. After clicking done, it goes into another 3 step popup that will not skip unless clicked 2x or more.This seems to be a bug, but is there a workaround? How to stop this?   [Mod: Moved to the bug section of the Photoshop forum]  

Photoshop version:Photoshop 27.10.0Operating system:macOSSteps to reproduce:Launch Photoshop with the Home screen enabled. Open a document by clicking its thumbnail under Recent Files on the Home screen. Do not click anywhere in the document and do not press any other keys. Press the Command (⌘) key. The currently selected layer's opacity immediately changes from 100% to 50%.Expected result:Pressing the Command key by itself should not alter the document or layer opacity.Actual result:The selected layer's opacity changes from 100% to exactly 50%.Additional information / workaround:The issue only occurs when the document is opened by clicking a Recent File thumbnail on the Photoshop Home screen.I have confirmed that:File → Open does NOT reproduce the problem. File → Open Recent does NOT reproduce the problem. Pressing Esc after opening the document and before pressing Command prevents the problem. Clicking anywhere with the mouse after opening the document and before pressing Command al

I’m using Edit-Stroke function, but in latest updates there is a bug that doesnt stroke with right selected color.I set stroke width, then I set stroke color, then I hit OK, but stroke has color that was prevously selected before change. Then I have to go one step back and try to Stroke again, then it usualy works well.

Issue: Photoshop doesn’t recognize preferred unit when making new guidesAdobe Photoshop Version: 27.4.0 20260218.r.15 6bd4063  x64 (final, Release) Operating System: Windows 10 64-bit Version: 10 10.0.19045.6466Steps to reproduce the behavior:Edit → Preferences → Units & Rulers... → Units → Rulers → Inches View → Guides → New Guide... On Position, put 5.4 or 5.4” OKExpected result: Photoshop should create a new guide on 5.4 inchesActual result: Photoshop creates a new guide on 5.4pxWhat happens before: Before the update, it created a guide on 5.4 inches even if I simply put 5.4 or 5.4”Temporary fix: I needed to put the inches unit for it to recognize, such that 5.4in

Adobe Photoshop Version: 27.4.0 2Operating System: Windows 10 64-bit When I go to Image → Canvas Size, the default is always pixels. I want it to be inches. Note: I have checked in preferences, units and measures, and the default is inches. Also when I go to image → Image size, the default is in fact inches, which is what I expect.  Is the default unit for image → canvas size now different? Is there a different place to set it?  thanks

 The newly added modern user interface does not preview when using “apply image”. It also does not save the last known state/settings of apply image like it has in the past. This means if you are doing multiple apply images you have to select your settings every single time which is a huge pain. Please fix this so preview works and last used state/settings is saved or keep this options in the preferences so I can turn off modern user interfaces. It’s great Adobe wants to modernize the UI. Just make sure it works the same as before. To replicate the issue: Step 1. Open an RGB image.Step 2. Duplicate Red channel and Green ChannelStep 3: Select duplicated green copy channelStep 4. Go to image - apply image and select these optionsLayer: mergedChannel: Red copyBlending Mode: AddOpacity 100%Check invert boxTurn on and off preview Issue: The image will not show the preview of what is being applied when checking and unchecking the box. Only hitting ok shows what apply image will do. I have GP