Questions
Recently active
Can anybody explain or offer a solution to why Bridge shows a different time stamp to Windows 11 on video files MP4 created on my Canon R6Mk2.I have never had video creating capability until I purchased my Canon R6Mk2 so this problem is new to me and unknown if this a new bug in Bridge or been there for some time.Windows 11 is showing the correct timestamp for the file created in camera, but Adobe Bridge shows the timestamp for the file created as 1 hour earlier than windows. This means when I try to sort files in Date/Time Created the video files are always out of sequence.Yes, I can go in and manually adjust the creation time, but it's a pain 1) having to do it every time, 2) having to do it all.The First image attached shows Windows Properties with the correct file time stamp.The second image attached shows what Bridge is doing and adjusting the file time stamp by an hour, and it is this which appears to be used when sorting by Date/Time. I have spoken to Canon, and they confir
How to disable or change the color of those blue borders around active panels and photos?I would like to have my UI without those distracting colors. In Bridge 2022 there were no borders and it was fine. In Photoshop, there is a setting to choose the highlight color and enable natural color mode. Can we have the same in Bridge please?
Estimado equipo de Adobe:Me gustaría reportar un problema persistente en Adobe Bridge. Desde las últimas versiones (especialmente a partir de Bridge 2023), el comportamiento del zoom con la rueda del ratón resulta errático e incontrolable. Al desplazar la rueda tan solo una vez —tengo un ratón cuya rueda funciona con clicks para avanzar y funciona correctamente en las demás funciones y programas de Adobe—, el programa aplica un zoom que continúa incluso después de haber soltado la reuda del ratón y que no se puede detener mediante clicks o girando la rueda en el sentido contrario. No he encontrado forma aparente de detener el efecto una vez iniciado, más allá de salir de la vista previa o cambiar de archivo.He comprobado que en las preferencias actuales ya no existe la opción para desactivar el zoom con la rueda del ratón, lo cual agrava la situación al no poder evitar este comportamiento no deseado. Tampoco hay respuesta útil al hacer clic en la imagen: el zoom simplemente altern
I'm tidying (and adding keywords to) an awful lot of images in my library at the moment. I've been trying to find out how to create a Keyboard Shortcut to appy Metadata edits once I've made them.It's so clunky having to use the mouse to find that little Apply button (tick). If anyone could tell me how to create the shortcut, I'd be very grateful.Thanks,Andy
What is this icon in Bridge called and where can I control it. I am using an older version of Bridge because I lost this Icon in the new version and cannot figure out how to get it back
I’m experiencing a strange issue when using Batch Rename after changing settings in Camera Raw 17.3.1. The RAW image loses its connection to the XMP data file. Look at this screenshot: If I copy the new file name and paste it again — the problem remains.If I change the sequence number at the end from “03” to “04” — the problem is solved.If I change the sequence number again from “04” back to “03” — it works fine.If I type a completely new file name, everything is OK. I reset the preferences — didn’t help. I don’t understand this issue and can’t figure it out. I tried using only digits, or only text — same results. Any idea why this is happening? Mac Studio M2 Ultra OS Sequoia 15.5Camera Raw 17.3.1Bridge 15.0.4.534 Thank you,Shlomit
All of a sudden when Br is launched at Start-Up(Windows11)..before the entire screen loads, I am taken to the "Sign-In" screen for "My Account". Must login here before I see Bridge entire screen.Never had to do this..always went right to Br. I have the latest version and have a valid Pscc subscription. Is there an option that "logs member into account also available?Thanks!Dan
Bonjour,Si les aides sont seulement anglais, je ne vais par poursuivre...
Hi everyone I'm trying to do a batch rename of 200+ photos. They are currently named "FirstName LastName" and I'd like to flip the order so that I can do some processes with them organized alphabetically by Last Name. I'd imagine there's a way to do this in Bridge but I'm not sure what the best way to go about it. Thanks, Lou
I have my columns arranged how I like in my content tabs, but when I open a new tab it reverts to the default columns. I never rate or label anything so I don't need those columns and always delete them, and I like my size all the way to the right. Which means I have to delete and move my columns around every time I open a new tab which isn't realistic for a daily workflow. This happens when I click the hamburger menu for new tab, AND when I press the plus (+) button for a new tab, AND when I right click a folder and select open in new tab. I've tried deleting my workspace and setting up a new one, but that didn't work. I've unistalled and re-installed Bridge but that hasn't worked either. No matter what the columns revert to default. Has anyone found a solution to this? Can I set the default myself? Is this a bug or a feature? I'm running a MAC Studio.
Has anyone had success using more advanced pieces of regex to properly rename strings? I want to Capitalize the 3rd back reference in a file name, and although I believe I'm following the proper way of doing so via Replacement Text Case Conversion, Bridge is just giving me a capital U instead. Please see what I am doing below. Additionally, does anyone know what flavor regex Bridge uses? Thanks!
This is a new problem and I'm not quite sure when it started. Certainly within the last couple of months. I haven't been able to track the exact steps when working in Bridge that cause this. Also, sometimes I have recovered the files, but I wasn't tracking those steps either. The worst case was recently where all the files I had open in Bridge were lost, but thankfully, I found them in TRASH so was able to recover them. I use a Mac Studio. I wish I could provide more information. What I can say is that it has happened several times. Most of the time, Bridge behaves normally.
“External exFAT drive not mounting in Bridge 2024 v15.1.0 on macOS Sequoia 15.5, though accessible in all other Adobe apps. No errors, just not listed. Permissions and cache reset attempted.”
Mijn laptop werkt in Windows 11 Home versie 24H2. Ik kan Bridge niet meer openen - er gebeurt niets...Bovendien (als ik via de verkenner naar mijn bestanden ga) zijn alle .psd bestanden ineens omgezet naar Adobe Photoshop Image.26 en Photoshop (versie 26.8.1) kan die ook niet meer openen.Er is enkele dagen geleden een update gebeurd van Windows, kan dit de oorzaak zijn? Hoe kan dit opgelost worden?
Hey everyone, So in this new post-pandemic work world many of us are working from home via VPN and logging into our work environemnts, sometimes changing which VPN to log into on different days. For my daily log-in location I have mapped the drives for ease and speed in getting to work right away each morning, and for all my InDesign links to work smoothly, linking to locations all over those drives at the remote office. The issue i am running into is the lag and freezing Bridge experiences searching for these mapped Network Drives when im NOT connected to the NAS drives over VPN. When im working elsewhere, or only on my local machine, i am (or cannot be) logged into that daily VPN location as it makes my internet get throttled at speeds dictated by the otherside's upload speed (10x's slower than my internet). The reason for not connecting to the VPN is of no importance. So is there a way to tell Bridge to temporarily not worry about a NAS drive that is not con
this happened to me before but I can't remember how I fixed it after I updated to the latest CC version on my mac 10.13.6 High Sierra.Usually, the Folders Panel shows the tree of folders and has the one I am in "open" in the panel.After the update, I am in the folder but the folder panel doesn't even show my user folder. It shows the computer folder, and guest folder but not my Matt folder.What do I do to change this?
I notice today that LR classic, Photoshop Bridge won't show any newly made folders , Anyone else seen this ?
I like to make sure all my photos have keywords assigned to them. When I upload new phots, then I search for 'keywords' 'do not exist' and I get a ton of folders which when opened contain photos WITH keywords. What am I doing wrong?
Hi, wenn ich einige Bilder in Bridge anschauen und davon durch die ENTF taste lösche springt Bridge nicht zum nächsten Bild sondern wählt gar kein Bild mehr aus. Soweit ich weiß gibt es die Funktion "Automatisch Weiterschlaten" in Lightroom, aber warum gibt es diese nicht in Bridge. Hat jemand eine Lösung oder vorschlag wie das gehen könnte ? ===== Hi, when I look at some pictures in Bridge and delete one of them with the DELET key, Bridge does not jump to the next picture bridge chooses no picture. As far as I know, there's the Auto Continue feature in Lightroom, but why is not it in Bridge? Does anyone have a solution or suggestion how that could go?
Does anyone know how to delete the keywords that come assigned with stock photos that I purchase? I've tried every which way in the keyword panel but can't figure out how to delete them. Any help would be appreciated!
Hi there. I'm having an issue previewing Webp images in Adobe Bridge. I have just aquired a new Macbook and for some reason Webp images don't preview, however I am able to preview them on an another Macbook using the same version of Bridge. Any insight on how to fix this would be great. Thanks.
When I am reviewing images (by tapping the space bar on a thumbnail) I want to zoom in a bit. When I left click, the image it s-l-o-w-l-y zooms WAY, WAY in. Then when I click again it s-l-o-w-l-y zooms out, which takes FOREVER!!! Isn't there a way to control the zoom so I can enlarge it to the size I want it, and not have it take a zillion years to do so??
First thought updating Bridge to latest software was the issue, then after updating to latest version of Bridge yesteday the problem persist. The content I want to view in Bridge is on my desktop and not loading and the wheel keeps spinning.
TL;DR: Scrolling in Bridge 2025 (15.0) is still laggy, but Bridge 12.0.4 still works way better. It astounds me that Adobe has yet to fix this. It's been years. I've tried every trick in the book and scoured the internet for anything. Opening the same two folders of raw images Bridge 2022 (12.0.4) will scroll like a breeze while Bridge 15.0 will be unbearbly laggy. This is insanely frustrating as newer versions of bridge have a couple quality of life features which I enjoy but need to keep myself on an older version to simply browse files without going insane. Adobe needs to fix this. When Windows Explorer can scroll and preview raw images faster than Bridge, you know Adobe really messed up.
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.