Questions

I have a setting that I want it to load every time I open a RAW photo in ACR. I always have to do it manually by doing "Load Settings ..."  Can I set it load automatically when I open a RAW photo in ACR?  Is it using the "Set Raw Defaults .."  I tried. It never worked for me. Need help.  Thank you.

I can't seem to find this anymore when opening an NEF file in Camera Raw prior to it opening in PS. Was the Moire slider removed from Camera Raw?

Hi everyone. I have a little question for you. I was making a quick comparison between the Shadows/Lights filter and Camera RAW and I noticed something that looked strange to me. If I use the Lights cursor of the Shadows/Lights filter I can accurately darken the lights without affecting the shadows, but if I do the same with Camera RAW the overall image is darkened. Can someone explain me why? Thanks.

I normally use Canon's DDP4 to process raw files which allows a TIFF file to then be sent to Photoshop/ACR.  However the new Denoise button is greyed out for TIFF files which is disappointing.  Any idea why that should be ?

Hi To allIm finding that on one of my Macs , that when i apply  enhanced portrait  in Raw that the subjects face is made washed out and  white. Am i missing something? on my other Mac running all the same specs this does happen at all.Thank you

Hey all, here is my issue: this week I printed a grayscale photograph in Photoshop 25.31 that was edited in Adobe Camera Raw 16.1 the week before. When printed this week, the photograph maintained the crop adjustments performed in Camera Raw; however, adjustments to exposure and texture were not reflected in the final print. What makes this strange is that, when printed the week before, all adjustments were maintained in the final print and it looked as it should. Also, when viewed on my screen in Camera Raw and Photoshop, I could see the adjustments and the image looked as it should not only last week but this week as well. I have worked with other versions of Photoshop—including full Photoshop, Lightroom, and Photoshop Elements—on both Mac’s and PC’s and have never encountered this issue. It may be helpful to know that editing this photograph was my first experience using the latest iteration of the Adobe Bridge/Adobe Camera Raw/Adobe Photoshop workflow since purchasing a subscriptio

Hallo,Ich habe seit dem letzten Update von Camera RAW Probleme beim bearbeiten von Bildern.Wenn ich während der Bearbeitung in Photoshop Camera Raw öffne und beispielsweise den Radialfilter benutze erscheint die Meldung siehe Anhang."Der Grafikprozessor ist auf einen nicht behebbaren Fehler gestoßen.Aufgrund eines Laufzeitfehlers wurde die CPU für den Rest der Sitzung deaktiviert"Es ist danach auch nicht mehr möglich in den Camera RAW Filter zu gehen."Camera Raw erfordert eine Grafikbeschleunigung um Fotos zu bearbeiten"Siehe Anhang.Ist es möglich manuell das Camera RAW Update rückgäng sprich auf eine vorhergehende Version zurückzusetzen?Ich sehe nur in der Cloud den Button für Photoshop oder Lightroom.Das Aktualisieren meines NVidea Grafiktreibers habe ich auch schon des öfteren probiert.Das funktioniert nicht oder ich habe schon den aktuellen Treiber.Um Hilfe wäre ich sehr dankbar:-)

I can't figure out how to get photoshop raw to stop automatically applying a preset to whatever image i drag into photoshop.. 

 I've recently dabbled in RAW to DNG conversion and noticed that the brightness of files converted from RAW (Fuij raf) to DNG via Adobe DNG Converter does not match.There's an exact 1/2 stop difference, the DNG files are darker. After looking at the Adobe forum this seems to happen with a lot of cameras/raw files but there's not real explanation except for some assumptions. I think it's because some camera manufacturers want to artificially protect the highlights and boost the dynamic range by underexposing - which is then compensated by the software interpreting the RAW file. Maybe there's some aspect of the original RAW file that does not get properly "translated" when converting it to DNG so the +0.5 stop compensation (in this case) does not register.  Would it be possible for the DNG Converter to compensate for that? To - in essence - add 1/2 stop in exposure or rather to set this as a general value? Or would that potentially clip highlights and reduce the

We create yearbook photos and images always have variation in tone and color in the background.  The background masking works wonders now on an individual image but is there a way to batch balance the background on multiple images so they are near the same tone and color?  I'm attaching a contact sheet with 4 images before and after. This is what I'm doing manually and while not perfect, obviously much closer.  Is there anyway to batch automate this process or get it somewhat close?  I would gladly by a coffee for anyone that can help find a solution for this, if there is 🙂 

I want to ask for help. The brush settings have disappeared in the masking menu of Camera Raw, I can only adjust the size of the brush. How can I display the other settings (flow, density, feather)?

I just update ACR this morning to the latest releasse V15.1.1.1329...I love, love, love the masking options and local adjustments that have evolved over the recent months and years and I find I can do a lot more in ACR and have to do less in PS.BUT, with each new releasse of ACR it seems to me that the masking runs a bit slower (possibly a subjective opinion). I know my hardware is dated, and I have in my plans to build a new PC soon. Currently running an i7-6800 with 32GB and a NIVIDIA Quadro M2000 GPU.Here is my suggestion: While masking a local adjustment, especially compositing together different masks (i.e. paint in and out bits of a Select Sky mask) I would like to be able to temporarily turn off the adjustments but leave the mask visable. As it is now if I do a Slect Sky and make some adjustments and then decide I have to panit in, or paint out bits of the mask I believe that in addition to computing the changes to the mask, that adjustments need to be computed at the same time.

Meu Pc não suporta a última versão do CR pois não tenho acelerador de processador gráfico. Como retorno a versão anterior?

I notice in ACR under the Optics menu, that for my Nikon Z8 with Nikkor Z 24-120mm f/4 lens, that the built in lens profile is automatically applied by ACR.Is there anyway to turn off this lens profile? Was used to being able to control the correction amounts or completely disable the lens profile for my other cameras/lenses, but I can't see how to do this for the Nikkor Z lens. Toggling the "use profile corrections" does not seem to do anything obvious.Peter

Meu Camera Raw esta desabilitado, e diz que nao e compativel com o meu sitema mas isso nao pode ser pq o meu imac e 4k 

We create yearbook photos and images always have variation in tone and color in the background.  The background masking works wonders now on an individual image but is there a way to batch balance the background on multiple images so they are near the same tone and color?  I'm attaching a contact sheet with 4 images before and after. This is what I'm doing manually and while not perfect, obviously much closer.  Is there anyway to batch automate this process or get it somewhat close?  I would gladly by a coffee for anyone that can help find a solution for this, if there is 🙂 

In the **scam email address**x webpage called "cameras supported by camera raw," there is a chart with the column-heading, "Camera Matching Profile Available." What is this column about?

Hello everyone, I hope you are doing well. I am having a particular issue with Camera RAW and PREVIEW.   I just purchased a new Mac Studio and installed Sonoma 14.2.1 I have Lightroom and photoshop at the latest version I have Camera Raw 16.1 I also have several camera, old ones, like 1- Lumix LX-100 (RW2 RAW files) 2- Nikon D800 (NEF RAW Files) 3- Nikon D300 (NEF RAW Files) And I see all the images in my Finder no problem, I can open them easily with the space bar and they show perfectly well on PREVIEW.   BUT I just purchased a Lumix S5iiX also using RW2 files for their RAW and I cannot see them at all in Finder/Preview. I can see the image in Photoshop or Lightroom but NOT in Finder/Preview and I use this all the time to quickly look at an image.NOTE: FIRMWARE  of my Lumix is at the latest (1.4)   Anyone has a solution ? I tried rebooting, I tried re-installing Camera Raw, nothing fix this issue. I even opened a ticket at Panasonic, so far they have no solution.

I have read a few post trying to find a solution but nothing seems to work for me. Here is the difference between camera raw and the psd file. I have no idea why but when i make a print screen, camera raw gets very bright. But even then, the difference between the color is quite big. The red is better looking in camera raw than in the psd. I hope someone knows how to fix this.

Does Lightroom plan to support heic/avif with SMPTE ST 2084 PQ and P3/Rec.2020 color gamut HDR files in both import and export?

Bonjour je ne ne trouve pas la pipette balance des blancs sur camera raw 16.1.  comment l'installer ?

I appreciate Sharpness is used in masks in ACR and the amount can be varied - but what is it actually doing?  Is it similar to Texture and Clarity?If Sharpening is used in ACR it can be selective and the various parameters can be suited to taste.I am trying to determine which will prove better for finner detail.

Por las notas de Adobe 10723 y otra relativa a máscas del primer semestre, y la propia experiencia, a pesar de tener activado en preferencias "Varios" si aplico máscaras desaparecen opciones como los mencionados en el asunto.  Y aparece alguna otra distinta. Es como si tuviésemos dos menús, uno para trabajar sin máscaras y otro para trabajar con ellas.Es farragoso. Yo lo solucciono desactivando máscaras y volviendo a ellas alternativamente. Todo ello salvo algún error de interpretación por mi parte. Supongo que hay razones de índole técnica que lo justifican. Pero, entiendo, no es lo deseable.   Muchas gracias

There is a big bug in the update!Camera Raw 16.1 HDR without data and small size which is not possible, so I will not update for the time being as long as that bug is there... and it has been that way for a long time since the update... 😞

y a t il une personne qui pourrait m'expliquer comment obtenir la barre d'outil audessus de l'image comme visible sur de nombreux tutos.  sur photoshopje cherche entre autre la pipette permettant de fair un blanc