Questions

New masking in ACR has refine edge for AI masks, such as people, as shown (circled in red) People maskHowever, an object mask does not have that capability Object mask 

Hi all, I posted this in the Photoshop forum but it was suggested i post it here.Hoping I can get some help/advice here. I’m running the latest photoshop /camera Raw on my windows 10 PC. My GPU is Nvidia geforce 1660super, 32 GB ram. If I open a raw file from bridge into camera raw I’m getting errors when using the sliders in the masking section. The errors are “runtime” or GPU has encountered a problem and will be turned off for the remainder of the session (or words to that effect). So, i thought my GPU was not powerful enough. However...I installed Lightroom Classic and I have no issues with the AI masking. As Lightroom and camera raw have the same engine (I believe) how come I’m not getting the errors that I’m getting in Camera raw? Chat GPT states Lightroom handles GPU more effectively...but this makes no sense to me. Thanks in advance.

Hi all,Hoping I can get some help/advice here. I’m running the latest photoshop /camera Raw on my windows 10 PC. My GPU is Nvidia geforce 1660super, 32 GB ram. If I open a raw file from bridge into camera raw I’m getting errors when using the sliders in the masking section. The errors are “runtime” or GPU has encountered a problem and will be turned off for the remainder of the session (or words to that effect). So, i thought my GPU was not powerful enough. However...I installed Lightroom Classic and I have no issues with the AI masking. As Lightroom and camera raw have the same engine (I believe) how come I’m not getting the errors that I’m getting in Camera raw? Chat GPT states Lightroom handles GPU more effectively...but this makes no sense to me. Thanks in advance.

On selected Windows configurations, the use of depth range masks, especially in conjunction with using them in presets, causes error messages that do not occur when using other mask types.When you hover over a preset containing a depth range mask, an error message appears saying that the GPU produced an error and has been deactivated due to the error.Sample configuration:Camera RAW 18.3.1.2580 Windows 11 NVIDIA GTX 1050 with 4 GB VRAMFor Mac, everything works fine. In Windows, there seems to be the need for some code optimization. Does anyone know when this can be fixed?

Als ik vanuit Bridge Camera Raw open en na bewerking de foto in Photoshop wil openen blijkt de open-knop verdwenen zijn. Hoe kan ik dat repareren? Ik heb de nieuwste updates en werk op een Mac Studio 2If I open Camera Raw from Bridge and want to open the photo in Photoshop after editing, the open button appears to be gone. How can I fix this? I have the latest updates and am working on a Mac Studio 2.

suite à la dernière mise à jour normalement dans camera raw pour accéder directement dans photoshop on fait ouvrir en bas à droite maintenant ça quitte camera raw et ça ne va pas dans photoshopÀ partir du Finder un raw va dans camera raw puis directement dans photoshopLa même manip à partir de bridge ça quitte camera raw et ça revient dans bridge mais ne va pas dans photoshopQue ce soit en copie ou en objet dynamique

In ACR 18.13.1, the histogram curves and RGB values aren't showing up. Everything works fine in ACR 18130. I haven't changed any settings. I've attached an image. 

The following video is a demo of the CPU usage of the latest version of Adobe Denoise AI on Windows 11. There is something strange in that Adobe Camera Raw runs the CPU in the high +90% for a long time after all the Denoise work is done. If you have ACR Version 17 with Technology Preview enabled, please run a similar test and report if you see the same strange CPU usage. Video at: https://www.arkacy.com/Other/Temp-Upload/n-5RJTN/i-v67pfCT/A Related thread on DPReview: https://www.dpreview.com/forums/thread/4784646#forum-post-68019063 Related thread on Adobe Camera Raw Forum: https://community.adobe.com/t5/camera-raw-discussions/p-technology-preview-enhance-denoise-super-resolution-raw-details/td-p/14856090 

Mac mini m4 24gb, Sequoia 15.5, OCR 18.3- masking failing in several ways, seems like memory leak. reinstalled ps/act, no change. works for Sony raws.

Très désagréables ces flares sur les photos !Ca serait sympa d’ajouter d

System:Windows 11 NVIDIA Studio Driver 596.36 Canon EOS R5 RAW (.CR3) files Photoshop 27.6 Camera Raw 18.3 Dual 4K Alienware AW3225QF monitors HDR disabled during testingIssue:Standard RAW editing functions normally, but enabling either “Raw Details” or “Super Resolution” causes Photoshop / Camera Raw to fail with the following error:“Could not open [filename].CR3 because the file-format module cannot parse the file.”Behavior:CR3 files open normally in Camera Raw Standard edits function normally The failure occurs immediately when Raw Details or Super Resolution are enabled Ordinary Photoshop opening works when these features remain disabled No enhanced DNG file is generatedTroubleshooting already performed:Reinstalled Photoshop Reinstalled Camera Raw manually Used Adobe Creative Cloud Cleaner Tool Removed Camera Raw preferences and caches Deleted .XMP and .ACR sidecar files Tested multiple fresh CR3 files Tested from local C:\Temp directory Disabled Malwarebytes temporarily Tested wit

In order to optimize storage space I convert pictures from NEF to DNG. Unfortunately the Adobe DNG Converter is almost unusable. The software works fine on older PCs with four core processors. On my newer PC with 8 cores and 16 threads it is impossible to use. It seems like a memory problem. Sometimes it works but most of the time it renders the whole PC unusable, often crashes Windoes Explorer. Even restarts won’t solve the tangled up DNG Converter. Frustrating. 

I’m reaching out to the community for assistance with an issue in Adobe Camera Raw that keeps recurring.Quite often, when I attempt to create a mask, I receive the following error message:“There was an unexpected error and your request could not be completed.”Immediately afterwards, a second message appears:“The graphics processor has encountered an unrecoverable error. Due to a run‑time error, GPU acceleration has been disabled for the remainder of the session.”This behaviour is now happening frequently, and it interrupts my workflow every time masking is required. If anyone could point me toward reliable guidance, known fixes, or relevant Adobe documentation, I would be very grateful.Thank you in advance for your support.

the file from the R8 work fine but the file from R5 has this problem

The lens profile for the Tamron 35-150 f2-2.8 for Sony is not compatible with the Tamron 35-150 f2-2.8 for Nikon Z due to incompatible distortion.

Hello everyone, I recognized a strange behaviour in Camera RAW. I opened Photoshop, then opened about 20 RAW files waiting for Camera RAW to load. So it does. I start working in CR, but after a few minutes CR is getting very laggy, my mouse pointer is sometimes freezing, and every change, for example exposure or any other parameter, leads into a delayed output for about 5 or 6 seconds. A smooth working is not possible anymore. So I made some tests. It doesn't matter if I open just one oder 50 RAW files, always the same. I figured out that this behaviour first occures when I use AI masking for automatically choosing the background or the main object in my picture. As soon as I choose a mask with AI feature, I see that my RAM is slowly filling up until it is completely used. From this point, the described delays happen. I have Windows 10, 32 GB RAM (should be enough, at least for one RAW file?), Ryzen 7600X and Geforce 4070S. I don't know when this started, becau

In building a python library to write and render DNG files (https://github.com/mu-files/mu-image/tree/main/muimg) we noticed that 10bit raw data is handled inconsistently between uncompressed DNG and JXL DNG.In the DNG SDK: - For uncompressed data - 10bit data is packed in the tiff ifd, then gets unpacked in the decoder and goes through the DNG renderer as values in the lower 10 lower bits of a 16 bit buffer.- For the JXL path, our initial attempt was to tell the JXL encoder to store 10 bit data. The inconsistency we ran into is that the DNG SDK code requests this bitstream as JXL_BIT_DEPTH_FROM_PIXEL_FORMAT - which tells the JXL decoder to shift the 10bit data up to the full 16 bit depth of the buffer being used.So from the DNG encoder side we cannot treat 10 bit data the same if it is being encoded as uncompressed or as JXL. If the DNG SDK code requested the data from jxl decoder using JXL_BIT_DEPTH_FROM_CODESTREAM then the decoder would return the 10bit data that the encoder intende

using bridge to adobe camera raw and edit going to photoshop using open as object does not carry the file location with it as it does with just open. If this would be correct it would appreciate it as I use this feature. It would be helpful as well having the selection to open and open as object to until changed in other edits.

I've been looking to test out the new dust removal feature in Camera Raw and couldn't find it. Turns out, the entire "Distraction Removal" section is missing from my Camera Raw app. I've gone into settings and enabled "New AI features" as directed in many instructional guides. Restarted Photoshop, and it's still not present. I even tried downloading the latest Photoshop beta (26.11), and I don't have this section at all. What am I doing wrong? I've screenshot the relevant sections for visual aid. Versions:Photoshop 26.9Windows 11 24H2Snapdragon X Elite PC

My remove tool stopped removing objects.  I have tried generative remove and plain remove.  Neither work.  For instance, I am editing a photo of a baseball catcher making a throw.  Off in the distance past the outfield fence is a school bus.  I am trying to remove it, but when the remove tool is used, it does nothing.  It highlights the area and looks like it is doing something, but it makes no changes.  Previously, prior to a couple of days ago, it was working fine.  What happened?

Please can someone explain the changes to the crop tool in Camera Raw?When using the gemoetry options I cannot crop to the edge of the image no matter what I do - this was no problem before. When the crop area is maximised, the crop tool no longer drags the cropped area, it only draws a new area to crop.This is incredibly frustrating. Please can someone tell me how to get the legacy crop tool back? This wasn’t included in any “What’s New” content I have seen.

In the latest veersion of ACR, the ability to mask subject/background etc has gone wrong. Particularly object masking. It has completely gone to unusable. It slects wrong things, Slects too Little and wont allow adding etc. It has completely changed in quality to the point I can no longer use it. I am stuck using only brush or gradient mask at best

When I'm using RAW images for editing, I typically load 10-20 images in Camera Raw. When I try to use AI-related features like AI masking, I receive the following error message:"The graphics processor has encountered an unrecoverable error.Due to a run-time error, GPU acceleration has been disabled for the remainder of the session."I have tried all the methods mentioned in forums for months, almost 6 months now. Currently, I cannot even edit a single photo if the preset is slightly heavy with AI tools such as subject selection or background selection.I have taken the following steps to try to resolve the issue:Updated the BIOS.Performed a clean installation of Windows.Conducted a driver cleanup.Updated drivers to the latest versions.Reinstalled Adobe apps.Tried using a previous version of Camera Raw (version 14.x).Used only Adobe default settings (without my own presets).Experimented with all combinations of graphic acceleration settings.Logged into a new admin user account.Had an Adob

As seen on the screen recording added to this post, my raw files are automatically getting more contrast and colour as they are loaded into Adobe Bridge… Anyone else have this problem? And how do I fix it? I would love the images to stay neutral until I edit them. 

The new masking selection tools in Camera Raw are great, but It would be much better if Camera Raw had a feather effect tool in the masking section. Because after masking, a thin, white line appears around the object that looks awful.