Questions

I use Inches as my "General" unit of measure, but in the new 2018 version (running under Win 7), it doesn't stick.I'm pretty sure all my other preference settings are sticking...it's just Units that won't take. On every launch or New Document, it reverts to Points.I've tried all the combinations, (prefs dump/reset, close/relaunch, reboot, set with document/no document open, set at the rulers, etc., etc,. etc.), I can think of short of uninstall/reinstall...Anyone else see this?

I spent a good hour or two writing out a detailed post about some confusion I have witessed regarding blending modes in Illustrator. I included a diagram that demonstrated the blend modes  did not care which definition you used to create your color, the results would be the same.. When I tried to submit the post, I got an authentication error and I just don't have it in me to write it all out again. Here is a JPG of my diagram demonstrating the same results for different blend modes in eery color space in Illustrator. I am hping that I did something wrong and that someone can figure it out. DM me for the original Illustrator file where you can select any circle on the page and view its color definition and blend mode.  

I've downloaded a PDF with outlined text. But when I open the PDF in Illustrator I'm getting a 'missing fonts' error message - even though they are system fonts that i have on my machine. The text has been converted to live text and has lost all it's formatting. Others in my office opened the PDF and the text is outlined.  I've tried downlaoding the file again, and it's now displaying as outlines. Is there a reason for this? My software is all up to date and I'm running Sequoia 15.4.1.

No idea how this happened but I closed my file as usual then when I re-opened it all of the artwork is flat and has a big blue 'X' on it, all one piece. Any help here would e greatly appreciated!

Hallo Adobe-Support, wir nutzen in unseren Illustrator Dokumenten oft die Deckkraftmasken, um unsere TIF oder PSD Bilder als Schnittmaske zu verwenden und den Hintergrund mit einem Grudge Effekt durchscheinen zu lassen.Leider ist seit der Version 29.5 nun ein Fehler aufgetreten, welcher schon seit CS2 nicht mehr da war. 80% der Elemente mit Deckkraftmaske verschwinden, da die implementierten PSDs oder TIFs nach erneutem Öffnen extrem hochskaliert werden und nur noch Weißbereiche zu sehen sind.Ich konnte das Problem zumindest temporär beheben, indem ich die ältere Version 29.4 wieder installiere. Leider ist dies keine langfristige Lösung, da uns so wichtige Updates entgehen. Wird die Funktion der Deckkraftmaske weiterhin unterstützt oder ist es wirklich nur ein Bug der mit der nächsten Version wieder verschwunden ist?Danke für die Unterstützung.Beste GrüßeJulien

I want to import excel data (specific columns and rows) into adobe illustrator to create a table. Can someone please help to automate this repetitive task? Regards, Sumit

Century Gothic is installed on my mac, it is one of the base fonts used form my company designs (that and Montserrat). Suddenly it doesn't register the font and just changes it, without letting me know. When I have finished working on a file, save and re-open, Century Gothic has changed to something else (doesn't even give the font name in the character bar or highlight it as a missing font). When I copy and paste something from another file where Century Gothic is working correctly, it changes it to gibberish or won't let me type 'correctly'. I have tried re-starting, pulling original files and working directly from them in case of corruption, re-installing the font. I don't know what else to try. Below is an example of simply copying and pasting from one document to another, the actual type changes.

사이즈가 400*400인 아트보드 100개에 이미지도 동일사이즈로 올려져 있는데, 아트보드와 이미지 모두 100*100으로 일괄조정 하고 싶습니다. 아트보드는 100*100으로 일괄조정이 가능한데 도형도 동일하게 아트보드의 중심에 맞추어서 수정가능한 방법을 아시는분 알려주세요. 

attached the ai file and video for your reference

Hello. I just started using Illustrator. I can write arabic and have arabic keybord added to Windows 10. In programs such as notepad, word, Edge, the key B becomes "lam-alif" when hit (with keyb changed). لا It is the letters L and A (lam alif) combined, a common "fixture". As I stated - it works fine in any Windows or Linux program, but in Illustrator it gets separated "auto-corrected" and I wonder if this "auto-correction" can be turned of. /Valter Ekholm

Hello, after updating AI my cursor stays all the time black, does not let me do anything on the screen and every time I try to draw or type something it kicks me out the screen.Any suggestion?  Hola, despues de actualizar mi AI mi cursor permanece negro todo el tiempo y no me deja hacer nada cada vez que intento hacer un cuadro o escribir me saca del programa. Alguna sugerencia ? 

I cannot seem to find a complete description of the Adobe Illustrator object model, only the scripting guides, which are a good start but seem to provide only a partial list...does one exist?  My immediate problem is figuring out the script add arrows to path: e.g., "turn arrows on, for both sides of selected stroke, using  arrow head 3 scaled at 50%". Easy enough to do by hand using the stroke menu, but not obvious how to do it via a script. In case it matters to the answer, am still in CS5.1. Thanks for any help.

I think I accidentally pressed a keyboard shortcut or something and now when I move an anchor point or a handle with the direct selection tool, all the anchor points and the path that isn't directly on each side of the point I am moving disappear until I let go of the mouse button. I am used to seeing the path and points of an object the entire time while adjusting an anchor point. I have looked through the keyboard shortcuts and I can't find anything that would seem to fix this. I have already tried restarting Illustrator and that didn't help.

Just update Illustrator to v29.5 today (2025.4.28), then I opend an .ai file made with previously Illustrator version (maybe v29.3). Illustrator v29.5 can't show the correct typeface (font) in some Chinese text, even using the "text correct tool (didn't know the correct tool name)" Hardware: Mac Mini M2 ProOS: macOS v15.4.1 I'm pretty sure it's v29.5 bug, coz I downgrade back to v29.4, the open the same ai file I previously made, everything works perfect & fine! as attached image (ignore the green markers)

Hello, I have had this issue for a couple days now and it has gotten to the point where I can't do anything in Illustrator without this bar popping up. I have tried quitting and restarting multiple times, trying older versions of the software, and updating it to the April 2025 version. Nothing has worked. It only pops up on one drawing I am working on which is mostly live paint and linework and the file isn't very large. Any suggestions are appreciated as I can no longer complete anything in illustator. 

¿Es posible guardar (por separado de los determinados por defecto) los atajos de teclado configurados por un usuario? He generado mis propios atajos, pero al buscar en la carpeta donde se almacenan, veo únicamente 1 archivo, por lo que asumo conjunta los del programa y los del usuario. Lo que busco es que al borrar el programa e instalarlo de nuevo, no tenga que configurar los atajos  nuevamente, sino, añadir o sustituir el archivo que los contenga. Gracias. 

A user requested a script to create grommet/eyelet marks in Illustrator for banner work. I've added the result to my website scripts collection. Free to download. All feedback is welcome. Thanks.https://www.marspremedia.com/software/illustrator/grommet-marks

I spent 3 months between Epson and Adobe as to why Epson 700 prints looked muddy. Finally I suggested since I hadn't any problems with older Epson, couldn't I download an earlier version of Illustrator. I downloaded Epson 2024 28...and finally clarity in prints. I have updated the Illustrator 28 recently and now the prints are muddy. Where can I get an older version of Illustrator 28? I want crisp prints again!!! 

When exporting assets (e.g., illustrations, icons) using the Asset Export Tool, Illustrator automatically appends an incremental counter to the filenames (e.g., asset_1.png, asset_2.png, etc.). However, I need to reset this counter to start again from 1, but I cannot find any built-in option to do so.What I’ve Tried:Deleting and Re-adding Assets:I removed all assets from the Asset Export panel and re-added them, but the counter continued from where it left off instead of resetting. Checking the Gear Icon Settings:I explored the settings in the gear icon within the Asset Export panel, but it only provides options for export formats (e.g., PNG, JPG) and does not include a counter reset option. Renaming Assets Manually:I tried renaming the assets manually, but the counter still increments automatically during export. Questions:Is there a hidden setting or method to reset the Asset Export counter in Illustrator?If not, could this featu

I mistakenly clicked to open from "Cloud" and now the window is too large and I can't get to the lower left corner to click "from my computer"? The system "locks" when I do file open now. I am using a 3 screen setup if that matters,. Any help would be appreciated. Thanks

Hey there I can't get rid of these red crosses that appear on my objects. It only happens when i resize them smaller. If i keep it large the red cross doesnt appear.  Can someone help me out and tell me how to get rid of that? Thanks!   

¿alguien sabe por que despues de guardar un documento y volverlo a abrir las imagenes me aparecen volteadas?

I can't find anything related to this in the Illustrator Scripting docs.I would like to select a file and get a file path so I can do something with it in scripting.  Is this something that should just be done with standard js or does illustrator have a Select File Dialog box you can call?

HI, My Selection tool can't drag objects properly. If I drag one time the loader wheel on my mac pops up. I have to click again for something to happen and then it is like I am holding down the left click at all times. Have troubles in inDesign but After effects and Photoshop works fine. I am on a completely new Macbook Pro MAX M4 with Seqouia. This is a completely new computer from my company and I had another completely new Macbook PRO M4 just before this with the exact same problem. I have tried with and without mouse and different mice, and changing things in the app, I don't have any other applications installed (Like Magnet etc). I have also excluded security software to Illustrator. PLEASE HELP!  

good morning,choosing Kozuka Gothic Pro in illustrator is a little bit hard cause the font name in illustrator font character panel looks like this screenshot:unlike what happens in the indd character panel: is it possible to view the font name in illustrator font character panel like in indd panel ?