Questions
Recently active
Problem: LrC 15.4.1 - Receive “Lightroom has encountered an issue updating AI edits” & “unable to backup catalog error” after migrating catalog from Windows 10 to Windows 11. =============== Background: Problems started when I moved LrC catalog/workflow from a windows 10 machine to a windows 11 machine. Backed up entire C drive from W10 PC to external hard drive (included the then-used LrC catalog). Signed out of all adobe apps on old machine before doing a “fresh”/”clean” install of Windows 11 to C drive. Kept all jpg/raw originals on F Drive, which on second catalog import attempt, had no issues on Windows 11. Migration Attempt 1 (Failed, Abandoned): After Windows 11 install, and LrC install, tried to open old catalog from Windows 10 and could not get it to boot properly. Tried to copy the Catalog from old Windows 10 C drive (external) to new Windows 11 C drive (internal) --- Alt+Open LrC and selecting the copied old catalog led to: missing files, missing edit info, and AI Edit
When I start Denoise, instead of pop-u showing the progress the entire right side panel is grade out and a test says : An AI process is running on the photo. Editing is temporarily disabled.” Ok, There is a problem: A popup is the standard established way of visually indicate a process i progress. The ways this new bizarre way indicates the process is confusing. Sometimes the images flickers, making an optical indication I am Done , I click on something, but there is no response to anything because the process is in progress. Please stop the foolishness. An example, a 45min running “dead process” on a 24 Mpix file: Even a sniping tool of Windows often hangs when Lightroom runs. The top apre aof the image shows a black background panel, which than disappears. and we cannot even make screens hot, because the entire windows hangs than hopelessly. An example:Forever hanging, never finishing. A 20Mpix, small by present times.
Lightroom Classic’s secondary display selection keeps switching from my preferred monitor to another connected monitor. This interrupts my editing workflow and forces me to manually reconfigure the setting.I use a three-monitor setup. Lightroom Classic runs on my left monitor, which is Windows display #1. My preferred secondary display is Windows display #2, the middle monitor. I use that screen to review crop changes and overall edits while working in the Develop module on monitor #1. However, Lightroom Classic randomly changes the secondary display to Windows display #3, and I have to go back into Preferences and set it again.This has been happening for years, and it occurs multiple times within an hour of editing. The repeated reconfiguration breaks my focus, and my current workaround is insufficient. I’m asking Adobe to confirm whether this is reproducible on their side.Steps to reproduce Open Lightroom Classic. Use a three-monitor setup. Set the secondary display to Windows di
MEU LIGHTROOM NÃO CONSEGUE MAIS ACESSAR SUAS INFORMAÇÕES EM NUVEM, VOU FAZER O UPLAOD DELAS DEPOIS DA EDIÇÃO E ELAS NÃO BAIXAM NO TAMANHO SOLICITADO POR ESTE ERRO
SummaryLightroom Classic’s built-in catalog backup takes approximately 14–16 minutes to create a 39.1 GiB ZIP containing 39.7 GiB of nearly incompressible .lrcat-data.I tested the same catalog with two local internal storage destinations: WD_BLACK SN850 1TB, PCIe 4.0 NVMe NAND SSD Intel Optane SSD 900P 280GB, PCIe 3.0 NVMe 3D XPoint Changing the destination from the SN850 to the Optane 900P reduced the duration by only 105 seconds, or 11.24%. The completed ZIP remained approximately 39.1 GiB.The main issue is that almost the entire backup consists of .lrcat-data that provides very little compression benefit.Actual resultsWD_BLACK SN850 destination Source catalog: D:\Lightroom\Lightroom Catalog.lrcat Backup destination: same physical WD_BLACK SN850 Completed ZIP: 39.112012 GiB Backup folder creation to ZIP last write: 15 minutes 34 seconds Intel Optane 900P destination Source catalog: same catalog on the WD_BLACK SN850 Backup destination: separate Intel Optane SSD 900P Compl
Boy, do I need help! I'm 87 years old. I'm loosing my ability to use Adobe products, but want desperately to complete uploading my You Tube channel and need to use Adobe. I live in Kalamazoo, MI. Will some one out there help me over this hump?
Hi Adobe Support,Since updating to Lightroom Classic 15.4.1, a large number of my Develop presets have disappeared from the Presets panel.My systemLightroom Classic: 15.4.1 Camera Raw: 18.4 macOS: 26.5.2 iMac 2020 Same Lightroom catalog I've been using all year (2026.lrcat).The issueAfter updating Lightroom, I was away for a week. When I returned, many of my presets were missing. The preset files (.xmp) are still present in the correct Settings folder. If I try to import a missing preset, Lightroom reports "Already Imported", but the preset still does not appear in the Presets panel. Some presets from the same collection are visible, while many others are not.Troubleshooting already completedConfirmed I am opening the correct catalog. Created a brand new test catalog – the exact same presets are still missing. Verified the preset files exist in: Catalog Lightroom Settings folder. CameraRaw Settings folder. "Store presets with this catalog" has been tested. Checked Manage Presets – th
I recently updated Lightroom Classic and Photoshop 2026 (27.8) I have Windows 11, My lightroom edit in choice to PS will open photoshop, it informs me to PS2026 not installed, once it connects, then keeps asking me if I want the program to change setting, Then the actual image to edit does not transfer across to PS, I have deleted both apps and re-installed, same issue.
Lightroom Classic on Win 11, 32GB RAM and a hobby photographer.I see on my Catalogue I have been using LR since 2008. I mainly (±80%) shoot wildlife. Ever since then I have shot in RAW with my Canon cameras which saved photos as CR2. I've always imported them: Copy as DNG. I must have done a tutorial those days telling me to do it like this.I now also have a Nikons Coolpix P950 and shoot in RAW as well.What is the best/recommended way to import RAW photos so I can make fulle use of all AI and other presets? I only use LR Classic for photo editing.Thanks.
Hi all. I’m on a M3 MacBook Air running macOS 26.3 and using LR classic v15.2 with Camera Raw up to date at 18.2.1.My problem is that on one of my external SSDs, a 2TB Samsung T7, LR will not show the photos. In grid mode it will show empty thumbnails with meta data, like star rating, but no previews. In develop it will show only the background color.I tried building previews, both standard and 1:1, via the menu for individual files, for a group of files and for all files. The progress bar appears but does not move at all and no previews of any kind are created. I tried creating a new catalog and copying the files to another T7 SSD and creating a catalog on that, but that did not work either. The drives are all exFAT formatted. The catalog lives on the drive.I’m confused especially because for other photos, I use the same setup and it works well.The photos and folders were originally created on an HDD drive on windows and then also on windows 10 copied to the SSD and used on the SSD o
I have tried everything to delete Select A Source dropdown when importing an image(s): a question in a browser or a video. Nothing because they do not address bulk deleting.Recent Files: (Desktop) You will see a box. Scroll all the way to the bottom. There is a prompt: Clear Recent Paths. Click. They’re gone!
I am backing up my lightroom catalog and it's been 15 hours so far. Is that normal for a catalog with 170,000+ images on lightroom? Should I restart my computer or will that corrupt the catalog?
Further I initially had around 160,000 photos; now I have 390,000 photos.How did this happen and how can it be repaired??
I have just updated to Lightroom 15.4.1, since up dating when I open the masking option I go to people and I get a message no people found, even though the image is a portrait. This now occurs on every portrait I use the masking option.
I’m editing a folder that has 240 photos. They are slides from about 40 years ago that I digitized by taking photos of using Valoi easy35. I hadn’t realized how much dust was on them so I’ve been using the Remove tool with Use generative AI and Detect Objects selected. Because it takes a long time to run, some photos taking an hour or so, I’ve been working on it over a couple of weeks or so. Several times I’ve exited Lightroom and backed up the catalog. After I finally got through the slides I went back to the start to see if I’ve missed any. There are a number of ones that I specifically remember fixing certain blemishes, but were there when I went back a second time.
al abrir Lrc me dice que IA tiene problemas y no me deja ver las carpetas que nesecito para editar
LrC v15.4.1 Windows-11: I am trying the Auto-Stack ‘by Visual similarity’ on a folder of images with many images I consider similar. Why am I getting the message- “Current slider settings doesn’t allow Auto-stacking”? and the [Stack] button is greyed out. Although the previews suggest that stacks will be created. This message appears for any position of the slider- except for the far right end when [Stack] appears but result is “0 stacks,...”Something I am missing?
I have a large keyword hierarchy with several layers of parent levels and subcategory levels. After catalog upgrade my keyword structure is in disarray, with keywords scattered into various levels parent to their correct placement in the heirarchy. They aren’t merely duplicated outside their proper place; some keywords have been removed and are missing from their proper place in the hierarchy. I understand that keywords can appear to be “misplaced” if files are imported from an old folder that was improperly moved outside of Lightroom control. This seems different. I may have done something wrong, but I don’t know what it was.
If you edit a keyword in Lightroom Classic (like adding synonyms or changing the keyword's export settings), all photos with said keyword are synced - even photos where keyword sync hasn't been activated.Lightroom version: 15.4.1Steps to reproduce:Open a catalog that is synced to Lightroom cloud. Activate keyword sync in LrC settings. Activate keyword sync on a selection of photos in the catalog (but not all). Choose a photo which doesn’t have keyword sync activated. Make sure that it has one or more LrC keywords. Find the chosen photo on Lr Mobile / Cloud and add a few random keywords to it. In LrC, edit one of the keywords of the chosen photo by adding a synonym to it.Expected result:Lightroom should sync any photos which have the edited keyword and keyword sync activated.Actual result: Lightroom syncs ALL photos with the keyword, regardless of whether they have keyword sync activated or not. (This sync will have the effect of the random keywords added in step 5 to be synced back to
When using the denoise or enhance features, it would be great if the filters selected in the Develop module would continue to stay selected. Currently, if I have a set of filters - like hiding rejected images, or specific color tags - and then decide to enahnce or denoise an image, whenever Lightroom finishes processing, it resets all of my filters back to showing everything. If I've already rejected an image - or 100 - I clearly don't want to see them, and don't want to have to keep clicking the desired filter after every single enhancing/denoising process, just to get rid of the clutter. Sometimes, I can batch enhance or denoise, but other times I need to do it one at a time , and repeating this process for 100-200 images, for example, wastes a lot of time and is incredibly annoying.
I cannot use Lightroom Classic. Every catalog I try opens in the background. All apps and graphics driver are up-to-date. I'm operating Windows 11 on a Sky Tech gaming machine. I have spent many hours online with several different Adobe techs have been unable to solve the problem. One seems to think that the catalog is corrupt, but I have tried multiple catalogs--backups and new.
Hello, I am having major technical issues with the Lightroom app. It constantly crashes and does not work at all. Since the app is unusable, I would like to request a full refund for my recent charge. Please help me process this refund. Thank you.
In Lightroom 15.4.1:Open Image with blue sky Generate a virtual copy Set copy to B&W in Basic panel. Sky retains a blue tint. Adjusting blue tones in B&W mix panel deepens or lightens tint but retains the blue colour. This also happens when using B&W preset such as InfraredNOTE: In further testing, I have only found this behaviour in two images which have been edited in Photoshop and saved at TIFF.
some of these files date back several years. How do I best manage them and how do I free up disc space?
Hello, Community. I'm a photography hobbyist who chases the aurora. Novice-level LRC user. Mostly illiterate when it comes to the details of monitors/sRGB color space. You guys will be lightyears ahead of me in technical acumen, but I’m hoping you will be able to point me to on-line resources or provide “Dummies” level info to help me understand the image discrepancy I find between the RAW image and what I import into LRC. Currently working on an older MAC (newer more robust MAC sitting here waiting to be unpacked). When I started post-processing RAW image from my 2026 aurora trip I immediately noticed a SIGNIFICANT difference between the intensity of the RAW image colors (MAC Preview app) compared to the image imported into LRC Develop module. (both displayed on 5-6 year-old DELL monitor, with same discrepancy seen on husband’s newer DELL monitor) LRC import images are 1:1. Is it my monitor settings? Any information or resources for a novice LRC user to help me understand w
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.