Questions

J'ai supprimé CURRENT dans data comme indiqué, ça ne marche pas

Bonjour, J ai un soucis avec LR classique depuis hier , les panneaux sont désactivés sur l ensemble du catalogue . Je suis obligé de réactiver les panneaux un par un et photo par photo , vue le nombre je vous laisse imaginer .Si quelqu un a une solution pour les réactiver par defaut je suis preneur . Merci   

When clicking on the Remove Section before it would automatically open all the Remove tab (as there wasn't a Distraction Removal tab) however now it's automatically closed and just means having to click on the Remove tab. I much prefered it before, as now it just means 1 more extra click! As there's only 2 sections in the Remove tab then it may as well just have both open.

nie moge scalic zdjec do hdr w lightroom clasic oraz mam blokade na inne opcje z czym to jest zwiazane?   Translation: I can't merge photos to HDR in Lightroom Classic and I'm blocked from other options, what's the problem?  

Bei meinem Mac Mini M4 funktioniert Ki Entrauschen nicht. Beim Anklickenn des Kästchens gibt es kurz einen Fortschrittbalken, dann wird der Prozess abgebrochen. Man kann es erneut versuchen, es passiert aber nichts. Nun hab ich Lightroom CC installiert und es dort ausprobiert. Es ist der gleiche Fehler. Natürlich habe ich verschiedene Files (RAW) probiert. Zweimal habe ich mit einem Mitarbeiter eine Remote Sitzung gehabt. Beide Male wurden verschiedene Versionen versucht, Einstellungen zurückgesetzt usw. Es half alles nichts. Katalog und Dateien sind auf einer ext.SSD, von der int.SSD ist es das gleiche Problem.Ich werde ja wohl nicht der Einzige sein der LRC auf einem Mac Mini M4 benutzt.OS Sequoia 15.6.1.  Mac Mini M4 16GB

Some of the photos look like they are still trying to sync but in the collection they say they are synced/ I am using light room classic with the latest update 

I have been using a Macbook Pro for years.  A year ago, I purchased a Macbook Air.  Both computers were running the same OS.  Lightroom will not import photos when using the Air, but will when using the Pro.Lightroom reads the photos on both computers, but gives an error message that photos can't be downloaded only on the Air.  All photos are being moved from a camera memeory disk to an external starage HD. Thoughts or suggestions welcome!

So, I've spent the last few days cleaning my computer. I uninstalled and reinstalled Lightroom Classic last night. There is 32 GB of RAM to work with, the program is running on a SSD, and my video card has 6 GB available.  I just started LR Classic and had to wait three minutes for my smallest database to load. Come on Adobe - you can do better. Your user survey asked about new features when the old features take forever to load. Help!  

Hi everyone, I’m running into a persistent issue with Lightroom Classic on macOS Tahoe (macOS 26), and I’d really appreciate your help or confirmation if anyone else has experienced this.The problemWhen I try to import .xmp presets into Lightroom Classic: The import dialog says:“Unable to import presets – all items were already imported”However, no presets appear in the Develop → Presets panel.The Manage Presets… option is greyed out.The .xmp files are valid and readable (I checked their XML content). What I’ve already triedI’ve gone through a lot of known troubleshooting step, find on the web also tried some help from Chat GPT including:Completely uninstalling Lightroom Classic via Creative Cloud.Manually deleting every leftover folder:~/Library/Application Support/Adobe/Lightroom/~/Library/Application Support/Adobe/CameraRaw/~/Library/Preferences/com.adobe.LightroomClassicCC.plistand reinstalling Lightroom Classic from scratch. 3. Placing .xmp files in multiple lo

I have a strange issue that is a bit infuriating.  I'm using LRC 14.5.1  on a MacBook Pro with OS 26. At one time, I was using an external SSD for my synced image location but have now changed it back to another volume that is a network share on my NAS.  This was how it was previously configured and worknig for quite some time.  The progam refuses to actually respect the new location  and keeps downloading  to the external drive. If uncheck the box in front of he location, it downloads the images to an obscure place on my system drive.  No amount of changing that foler location actually does anything except continually use the external drive. I've deleted the preferences file butthat has no effectd on that setting. What else can I try?

I really enjoy working with the Lightroom Classic map module. With the update to version 14.5.1, I get the message ‘Unable to connect to Adobe servers. The map module is not working.’ And when I create a collection and try to connect it to the Lightroom ecosystem, I also get the message ‘Attempting to connect to servers’ and the connection is not established. In short, the Lightroom ecosystem is disrupted. I have spent several hours on the phone with customer service and followed all of their suggestions. However, Adobe customer service was also unable to resolve the issue.   I discussed the problem also with my computer expert.  It’s a bug in the software and not a bug on my computer.  

COMO LO SOLUCIONO?

I imported new images to LRC. Images are stored on external SSD. I started culling,or thought I was... When LRC prompted me I clicked on the 'delete from disk' option. I seemed my external SSD was working as the LED was blinking. I continued to create a new collection in LRC with the images I wanted to keep. There are 137 images in my LRC collection, but over 1,000 still on my external SSD... not understanding why those unwanted images are still stored on the external SSD.

Since the update to version 14.5.1. neithe the card modul nor the Synchronisation with the Lightroom Ökosystem is working  

I've noticed several erratic behaviors recently.  It is not consistent.  The majority of the time it performs perfectly.  However, without warning that will cease to be the case.  The three most notible examples are:   1) Creating new folders.  In the Library Module, if I go to a folder where I want to create a new subfolder and right-click, Create Folder...., sometimes it will take several minutes before the folder will appear. 2) In the Library module if I try to delete a virtual copy, it will show "Gathering Information" up in the message area and will take several minutes before it will prompt the confirmation message. 3)  Creating virtual copies.  When I am having these lags as referenced below, another instance would be creating new virtual copies.  If I right-click on an image, it may take several minutes before the right-click menu appears.   Again, these behaviors are not consistent.  If it's running well, it will run perf

El pincel de máscaras en LIGHTROOM no funciona en el modo restar. llevo ya varios días que es imposible perfeccionar las máscaras utilizando el pincel. Muchas gracias por vuestra ayuda

When I see an MP4 file made by mistake in lieu of a photograph and try to delete it, Lightroom almost always says "The file named blahblah.mp4 cannot be moved to the Recycle Bin."  But that message NEVER says WHY is that so. That is an obvious, glarig error, which must be rectified. 1st off delete wish should be respected, and if something really legitimately prevents it, the message should state why: file open, file not found etc, anything.

Lightroom Classic does not present an ICC for Epson Ultra Premium Photo Paper Luster, evern though it presents this paper type in the print settings pannel. --------- When I am in the print settings panel on the left side of the screen, I get a choice for Epson Ultra Premium Photo Paper Luster:     I make sure to save all my print settings before going further in the Print Module.   When I go to the right side and select an ICC from the drop down list in the Print Job/Profile drop down, I don't see an ICC for this paper type. (I have carefully gone through the list displayed by selecting "othere").  Selecting any of the displayed papers do not give as good a result as using the epson print layout software on an exported jpeg file of the target file and the Ultra Premium Photo Paper Luster selected in settings.  You can see that the Epson print layout software can find a configuration  as this paper type as a choice in it's settings list:  &nbsp

Hi all, this is something new to me that has happened. I export all my lightroom edited photos on to an external hard-drive in a new folder within the RAW images. I have just come to upload some of the edited photo folders to another external hard drive but they have all gone. I deleted photos out of my lightroom library and now the only edited items on the external hardrive are the ones that still remain in the lightroom library. How has this happened? Can I get them back? How do I stop this happening in future? Many thanks 😊 

Dear Adobe Support,I’m experiencing persistent freezing and unresponsiveness in Lightroom Classic on my MacBook Pro. The issue began suddenly a few days ago and continues even after reinstalling and testing multiple versions of the app.Below are my system details and the steps I’ve already taken to troubleshoot. I've used Chat GPT to assit in diagnostics, and this summary write up. But please help. this is urgent. I'm a wedding photographer and behind on assignments, and this program will not open. System InformationComputer: MacBook Pro (M1 Pro chip)macOS: 15.7.1 (Sonoma)RAM: 16 GBLightroom Classic Versions Tested: 14.5.1 (current), 14.4 (rolled back)Description of IssueLightroom Classic hangs immediately after launch.The interface grays out and becomes unresponsive — clicking produces the macOS “inactive app” sound.When it does open briefly, the Library module fails to load previews or respond, while the Develop module works briefly before hanging.Quitting the app causes another

I've been uisng LR for a while to apply my photo presets to video clips, as a simple means of getting my photo preset applied to clips for consistency. So applying the preset on import, then exporting the clip to edit in other software.Now with LR 17.4, when I go to export, the export dialog progress bar apepas in the top left, but there is no progress, nothing happens. It just sticks on 'Export XX files', and wil stay like that for hours or even days with no progress at all. There are no error messages, and when I work through the export dialog box there is no indication that it isn't going to export.Any ideas? Thanks in advance. 

Version 14.5.1Windows 11Steps to reproduce the problem1. Right click on one of several missing photos - click Show in Explorer2. Click Locate Missing Photo3.In Locate Missing Photo window  I navigate to the new location of the photo and check the Find nearby missing photos box4. Click SelectExpected Result in that all of the photos in the folder would now be found in lightroonActual result - only the photo I selected was found 

I use Narrative Select to cull my photos, then I Ship them from Narrative Select to Lightroom Classic. Not all images are transferring to Lightroom Classic. This has happened to multiple galleries, but I'll just use the most recent one as an example:I had a gallery of 1,399 images. Using Narrative Select I tagged 140 images to Ship to Lightroom. When you click Ship, it should bring up the Lightroom Import screen with the 1,399 photos and the 140 images selected for import. Instead what happens is that it brings up a Gallery of 1,218 images and only 85 are selected... So it only successfully transferred 85 photos. Like I said this has happened with multiple galleries, and I'm not 100% sure if this is an issue with Lightroom or with Narrative, but all images from the gallery show up in Narrative, but they don't all show up in Lightroom. I'm tried unchecking the "Don't Import Selecting Duplicates" box - nothing changes. I've tried to select all Images, Turn Off Filters, and Expa

After I did the last ever Windows 10 Update before Microsoft ended Windows 10 Support on the 14th October 2025, as I have no intention to ditch Windows 10 for another hyped-up OS Windows 11, all of a sudden my desktop Lightoom Classic and standard Lightroom, and Photo Elements icons just disappeared as well as the Programs Listed from my Start Menu All Programs. What would have caused that?  Any help/answers appreciated.

As much as i try i can not get a loyalty free track onto my lightroom slideshow. MP3. Arrrrrrr Please help.Thanks