Questions

Hello everyone.Apparently that possibility is no longer available after a specific version of Photoshop CC 2015 and I'm wondering if there is another way to get the same result without too much work and stress.Let's assume that we have a cube 6x6 that I want to slice in single pictures, for some reason the lines on the pictures are not in the same position as the ones created by Photoshop so I will need to move them.In Photoshop CC 2015 after you do right click, slice selection, put your preference and click ok, all the slices are already selected and if you move one of the lines created by Photoshop you will move for the entire slice selection (example in attachment)Something similar can be obtained in the new version of Photoshop if you use the Slice Tool Selection, hold Shift and click in each slice (which is taking a lot of time).Anyone have an idea how to solve/bypass this problem? Thank you

This is a problem I've had for years, I can't find a solution online so I thought I would document it to share and start a dialogue. I just want to be able to move my selections by small amounts again! Snapping is not enabled, this is photoshop 2024, but I've had the same issue with older versions of photoshop. Is this just a setting tick box I've missed? I've documented it here: https://www.youtube.com/watch?v=w9UlmjevH-8

My Adobe Creative Cloud Application on my Macbook 2023 just had me update my Photoshop application this morning (04/01/2026) at around 10 am-ish. It was taking too long and I had work to do, so I canceled the update. When I went to open my Photoshop, I got an error that it couldn’t open because it wasn’t finished or it had been damaged. I tried restarting my computer and I got the same problem when I clicked directly on my Photoshop app. When going into the Creative Cloud application, the Photoshop app wasn’t even installed. After reinstalling it and finally getting it to open, my Workspace was completely changed up and my saved swatches were gone. I followed the directions of others who had gone through the same problem, but my swatches are nowhere to be found.I use these swatches for work so their really important and I really need to get them back. The reason I do have their code saved anywhere was because I had them saved in my Photoshop workspace. I didn’t have a reason to believe

The backslash key flips the default brush colors back and forth.Any attempts to paint black on a white mask yields no change.To my eyes, this looks like a normal brush to me: moments prior to the anomalous behavior, it was all working fine. Obviously, I stumble fingered some tool mode change key, but since it was a stumble I have no idea what it was. I find it interesting that I can change the default brush color from black to white and back again. I hadn’t known that was possible before. Not terribly useful ‘cuz “X” works fine, but interesting. Anyway, the tools state is “normal” and the image mode is “RGB” the flow and opacity are 100% and shift-lock is off. No clue as to what else to check for. Help? :)

Версия фотошопа 27.5. Creative cloude обновлен. Драйвера обновлены. Брандмауэр выключен. Ничего не помогает.

I am also having these types of issues after the update. Pls correct this. I have tons of work to get done and I have to keep restarting PS……...Michelle

Since the last update, Camera Raw no longer finds people in mask mode—neither in RAW mode nor as a filter. I always get the error message: No people can be selected in this photo.And if anything is found, it is completely irrelevant, even objects that are not related to the persons or are beside them. See screenshots.Is this a known issue or just to me?But finding/selecting subjets or people with tools in menue bar is working properly.

Issue: Photoshop 27.4 (March 2026) "Exit Hang" specifically involving CoreSync.exe.System: Lenovo P1 Laptop, NVIDIA RTX 4060 Laptop GPU (v595.79 Studio), Windows 11.Technical Details: Upon closing Photoshop, CoreSync.exe maintains a persistent file handle/lock on the %temp% Photoshop Temp file (approx. 1.5GB). This prevents Photoshop.exe from terminating and triggers a "zombie" state for the Adobe Crash Processor.Observed Behavior: The system enters a "One Use per Reboot" state. Subsequent launches of Photoshop fail in silence, or "Already Running" or "Taking longer than usual" errors unless a manual taskkill is performed on CoreSync.exe and all related Adobe services. This occurs even after a clean GPU driver install and PS preference reset.  Unclear without looking in logs when this started.  

In Photoshop 2025, I didn't have this issue. In the new update, 90% of the times I click on the eye icon of a layer to hide/unhide it, my Navigator stops showing the entire image and only shows a chunk of the image that is the size of whatever layer I was hiding/unhiding. My GPU and everything else within my PC is updated. If it's just a me issue, I apologize for the inconvenience, but would naturally still like to know if there's a fix. 

Generative fill hasn't been working in Photoshop for a month now. It keeps giving me the error "There was a problem and we couldn't complete your request. Please try again later." I can't see the number of credits in my account either. Can you tell me how to get it working again?

Windows 10/11 - Photoshop CS5 --Photoshop does not open automatically when jpg clicked. Open with photoshop.exe doesn’t work either. How to fix?

I need a quicker way to switch between brush and eraser brush during use.

Hello. Is it just my impression or are the images generated by both Adobe Firefly and Generative Fill in Photoshop really so pathetic and of poor quality that they cannot be used? In Photoshop you can't even change clothes using generative fill and if you can, it's far from what you wanted. The generated images are much worse than the initial Beta version of Photoshop.

Error is attached. I’ve received this in the past but usually Adobe fixes it in a few hours. I don’t see anything about this on https://status.adobe.com/

I’m working on an animated character in pixel art but when I try to move an object on the working layer it repeat the offset also into the next frame doing a messy animation.. I’ve already tried with the timeline panel options without success. There’s a fix for that?

After an update the gradient tool reverted to its new implementationI spent a few weeks trying to use it - I gave it a shot.This is why it doesnt work for me:I use it on masks. Thats pretty much it, but I use it a lot.  I rarely use just one, by default I have it set to screen, I create a black mask and add gradients to it.  I failed to find a graceful way to add more than one gradient to a mask with the new tool.  If there is a way, it is not at all obvious or intuitive. The problem isn't just with this tool though, its with the overwhelming feeling of total pointlessness I feel in writing this, and the culture that creates in the community.  How many people just give up trying to give feedback.  There's only so many years you can try to point things out, report bugs that go unresolved (one for premiere is now 7 or 8 years old).  Do you have people testing this stuff that have been using photoshop for 30 years? I'm pretty sure that I wouldnt be

Bonjour à tous, Fût un temps ou je pouvais naviguer et modifier mes photos 360 issues d'une camera type insta360 à travers le menu : 3d > panorama sphérique > nouveau calque de panorama à partir du calque sélectionnéCa me permettait d'effacer proprement le trépied mais depuis les dernières versions de Photoshop impossible de retrouver ce menu.Comment traiter les photos panoramique 360 dans photoshop ? Merci pour votre aide. 

I've looked through many postings about using the 3D option in photoshop to create a 3D mesh. Hoever, in Dec 2024, with the latest version of photoshop, this option no longer exists. So is it possible at all to do this now in PHotoshop? Or do I have to use some other app ? If so, which one? I don't have substance 3D and its way too expensive for simple tasks like this.  Any solution is appreciated.  Do i need to go back to an earlier version of photoshop? Can both versions reside on my desktop? I need this for a 360 spherical panorama to send to adobe aero.Thanks in advance!!!!!

// Reference the active documentvar doc = app.activeDocument;// Check if there are any paths in the documentif (doc.pathItems.length > 0) { // Access the last item using the length property (0-indexed) var lastPath = doc.pathItems[doc.pathItems.length-1]; // Make the path active/selected lastPath.select(); } else { alert("No paths found in the document.");}Photoshop version: 27.4Hi, I am making a script and I realize when trying to get the last Path when there is a Symmetry Path being the end, the Path it takes would always be the 1st path. You can make your own document with 2 normal paths and the final being a symmetry path, and test the script yourselves. If I am doing something wrong let me know and how to rectify it tq!

Hi, I had issues with Scriptlistener not making logs for years and gave up trying to fix I do need the ActionDescriptor when a Mask is being transformed and moved, basically the equivalent of app.activeDocument.selection.translate(x,y);Asking for this instead of using the above code since for some reason my code keeps breaking under suspendHistory, so giving AM a go.

Hi, I’m having an issue with PSD previews on Mac. Whenever I save a PSD from Adobe Photoshop, the preview looks glitchy when I press spacebar (Quick Look in Finder). The actual file is completely fine when opened in Photoshop — it’s just the preview that’s broken.Anyone experienced the same thing? 😣 

Export isn't working. I can't use the program. I'm getting an interface error, or when I save the files, the folder is empty. Are you going to correct the mistakes?

click on tab with name of file in Photoshop

I can't open the current Photoshop v27.5 on my PC (the first time having this problem with any version of Photoshop). I deleted the old version and re-installed the current one. The startup illustration flashes on the screen for a second and then disappears and then nothing happens. 

I can't find a setting to be able to turn off these annoying auto-playing video tutorials. Is there one hiding somewhere? I really do not want to be interrupted with this - especially with sound! - in my workflow. Is there a way to tell PS not to show them?