Questions

Hi, we use Premiere for voice recording on a Mac Studio running macOS Tahoe. Io 4K Plus is connected via thunderbolt. Latest firmware, latest (v18) Aja driver. After we upgraded to 26.3.2 from v25, Premiere crashed after finishing a voice recording clip. It was stable and reliable on Premiere 25.  We noticed in the release note that a related bug was fixed in 26.5. So we upgraded again ~25 seats. However after upgrading to 26.5 Premiere continues crashing occasionally. This is annoying and frustrating - we have to produce a daily news show broadcasted live on TV. What can we do to make it reliable again?best regards Sebastian 

Hi. Using Adobe PP 2026 and I have a saved project/timeline that I use constantly. It contains a lower third graphic that I use throughout the project and change the text every week. Prior to PP2026, I could change the text in the first lower, and the rest would update automatically. Does this no longer apply with 2026? Am I missing something? 

I have normally extracted subtitle text used in Premiere Pro through Text tab → Graphics → Export to CSV file, and used that for a multilingual translation workflow.However, starting around the 25.6.2 update, the CSV export for Graphics has changed, similar to the one for transcripts.Previously, each row followed the format<"Start Time","End Time","Text","Video Track","Layer ID">,but now it uses<"Speaker Name","Start Time","End Time","Text">.The problem is that the Text column no longer includes the values of all Text layers.I use multiple Text Layers within a single Graphics Layer, but only the content from the top-most Layer (based on Properties — formerly the Essential Graphics Edit tab) is being exported.Everything worked fine up to version 25.5, but the changed CSV export behavior from 25.6 onward has completely broken my workflow.Is there any solution other than downgrading?

So, when I go “Reveal in Project” the project clip has a different color label to the clip in the timeline.Expected behaviour:With “Show Sequence Label Color” switched OFF I expect to see the label colour in the timeline match the label colour in the project browser. When switched ON I expect to see whatever the label has been set to in the timeline clip. In my test case these should be two different colours.Bug behaviour:“Show Sequence Label Color” makes no difference to the label in the timeline. Whether it’s ON or OFF, it is always showing the timeline clip colour, never the browser clip colour.This is on 26.3.2 (build 2) on an M2 Mac Studio, running Tahoe 26.5.2

Windows -     version : 10.0.22631.1

テキストに背景をつけた後、別のテキストに長方形ツールで線形グラデーションの背景を描くと、全てのテロップの背景にそのグラデーションが適応されてしまいます。

The playback on my timeline is delayed, choppy, and sometimes stops altogether. Video frames drop, audio comes in and out; sometimes the video continues to play in the Program window but the playhead freezes in the timeline and the audio stops. It’s just generally not a smooth playback experience and makes it impossible to edit. (I’m attaching a screen recording.) I am editing with a SanDisk 4T SDD. My computer is a 2022 MacBook Pro running on an M2 chip. OS is Tahoe 26.2. Premiere version is 26.0.0 (Build 72).In Premiere, Renderer is set to “Mercury Playback Engine GPU Acceleration (Metal).” Here is what I’ve tried so far: -resetting preferences in premiere-updating my computer software-updating Premiere-deleting media cache-clearing out the hard drive I keep the project on so there is 1T of free space-reducing playback resolution to ¼-used the Media Encoder to convert MXF files to Apple ProRes 422 LT codec  I have been editing other projects and have not had any issues.Can anyone hel

So for the past year or so I’ve been noticing (on the most up to date versions of Premiere) that when I re-open a project I’ll frequently see this bin created with duplicate media called “Recovered Clips”. When I searched for that issue here on the forum, I found a couple threads discussing it regarding when using the “Productions” feature. But here’s the thing – I’m a solo freelance editor working on single projects, not collaborating and not working on anything necessitating “productions” at all! So I have no clue why this is happening. The other variable that is NOT occurring are crashes. It would make sense to me if this Recovered Clips bin were created after a crash or something. But nope – this happens on projects that were safely saved, closed, computer powered down, restarted and re-opened the next day. There’s no reason to “recover” anything. The one thing I can say is that I did once work with a team of editors about a year ago, where we had to pass projects back and forth ov

Hi! I’m looking for a solution to freezing inside of Premiere Pro, lagging on the timeline, and frozen exports. I’m running Pr version 26.5.2. My timeline involves lots of effects, but before updating to Windows 11 this week my system was able to handle it. Here are my device specs: Device name    DESKTOP-1ANHRT5Processor    Intel(R) Core(TM) i9-10850K CPU @ 3.60GHz (3.60 GHz)Installed RAM    64.0 GB (63.9 GB usable)Graphics card    NVIDIA GeForce RTX 3080 Ti (12 GB)Storage    11.68 TB of 27.29 TB usedDevice ID    CE867579-32F5-4772-89BE-A151D9CEC1F6Product ID    00330-80000-00000-AA598System type    64-bit operating system, x64-based processorPen and touch    Pen supportNVIDIA Studio Driver Version: 617.42Edition    Windows 11 ProVersion    26H2Installed on    ‎10/‎14/‎2026OS build    26300.9711Experience    Windows Feature Experience Pack 1000.26100.372.03rd Party App in use:Boris FX ContinuumThe sequence timeline involves many opacity effects.I’ve opened Premiere holding shift and c

Premiere Pro is not opening, citing error 205.Subscription is current. Other cloud programs seem to be functioning well.The problem seems to only be affecting Premiere Pro

Hello.I’ve transcribed a bunch of interviews in Premier Pro and now I’m assembling sequences of selected clips to share with the client. Is there a way to have the transcript of the sequence display the source timecode instead of the sequence timecode? Thank you! 

It seems like we didn't support create multicam clip with ExtendScript, I'm using CEP ZXP. I also look through UXP but I coudln't find how to create multicam clip.  

transcription isnt working like it should in premiere 2025. when i try to search words in the transcript it wont take me to that part of the timeline, it will only take me to that part of the clip. ive tried different clips from mfx to mov to mp4. dont have this issue in premiere 2026. i did a whole screen recording to demonstrate the problem. please PM me so I can share this private video with you. mac os golden gate 27.0.1, premiere 25.6.6 (build 5). 

In Adobe Premiere, there are a lot of beautiful transitions. Some, like “Slide”, will slide my footage into the scene exactly where I need it. Great.If I choose an animation setting with “Overshoot”, the Slide effect will come in farther than intended, and then settle back into position. this is what I want. However, the Slide effect will also crop the footage so that you can see an obvious edge, even if the original footage is larger than the final video’s resolution. Changing the footage’s position does nothing to remove the crop that the transition provides, and if I remove the transition, the cropping effect goes away.Is there any way to remove this? I love the Overshoot bounciness, but not the cropping.

Lo=L+ 0.707C +0.707LsRo=R+ 0.707C +0.707Rsis standard downmix equation. PP implementation seems 5-6dB quieter, with the surrounds reduced. Also the 5.1 Mixdown type setting (Front only, Front & rears etc) is only taken when PP is restarted

I'm shifting a linked VideoClipTrackItem one video track up (to make room for another clip below it) using SequenceEditor.createCloneTrackItemAction() + createRemoveItemsAction(), since there doesn't seem to be a track-level move command (createMoveAction only shifts the in-point in time, not the track). This clone+remove approach works fine positionally, but it breaks the link to the item's linked audio clip (even when I clone+remove the linked audio item too within the same transaction).Is there any documented (or undocumented) way to preserve the video/audio link when moving a linked item to a different track via UXP? Or am I missing something obvious?

i a m creating v2 timeline gradient shape and text but when i play cant show in program window 

Hello,I’m filming myself against a green screen, with a table in front of me and objects on that table.When I remove the background using Adobe Express, it successfully removes the background but also removes the table in front of me and sometimes the objects on that table.The cutout elements always have a very thin green outline. When I add any background, it doesn’t look very clean.I’ve tried different lighting setups and filmed myself both close to the green screen and far from it (1.80 meters). The result is the same.If I subscribe to Adobe Premiere Pro, will I be able to fix all these issues?I’ve gotten the hang of Adobe Express—is Adobe Premiere Pro easy to use? Keep in mind that for now, I just want to shoot a video against a green screen, remove only the background, add an animated background using Adobe Firefly, and edit the video using multiple shots with cool transitions.Thank you in advance.

Run through all the fixes, read all the forums.  Still can't seem to conquer this one:Have tried the following:  cleaning all caches, renaming the common folder, re-installing the software, changing the audio files from wav to several others, copied the project and did it from multiple locations, right clicked the audio to render & replace...nada...Anyone have a better grasp on what to do with this one?Many Thanks!

Though short reels extension says MP4, it is impossible to have short reel video as project file in APPr. Only it’s audio file gets upload. What is reason for that?  

Multi-cam flatten feature either overwrites or ignores audio only channel. This is a persistent issue.  Processor    Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (3.60 GHz)Installed RAM    128 GBGraphics card    NVIDIA GeForce RTX 2070 SUPER (8 GB)Storage    10,92 TB of 13,65 TB usedSystem type    64-bit operating system, x64-based processor

If I have an interview with somebody who has recorded their own audio, the conversation between me and them is on 2 different audio tracks. But when I try text-based editing using 2 (or more) audio tracks, it doesn’t work. Because the transcript in the Program Monitor can only follow one of the transcribed audio tracks. This means I can’t read the conversation. In the picture you can see the conversation skips from 01:58 to 03:25, so it’s missing the transcript from the second audio clip.I have transcribed all audio files. I can see them in the Source Monitor, just not in the Program Monitor.  On top of that: I can’t seem to even SWITCH between the different clips in the Program Monitor. The Program Monitor really seems to be stuck on just the first clip I’ve transcribed. How is this possible? Am I missing something here? It seems like it should be a very basic feature in text-based editing. 

I understand the need for it in other panels, but what would be the use case for the shortcut if I am already in the Project Panel? To clarify I am not talking about “Reveal in Finder”, “Reveal Original”, etc. I am specifically talking about the command “Reveal In Project.”  

When working with short videos, I find that organizing clips before editing can save a lot of time. Keeping source files, audio, and reference clips organized makes it easier to build a smooth editing workflow in Adobe Premiere Pro.I am curious how other editors manage videos collected from different sources. Do you organize clips into folders, rename files before importing them, or use labels and bins inside Premiere Pro?Sometimes I also save short clips for reference or inspiration, so having a clear system for managing media is helpful before starting an editing project.What is your preferred method for organizing short form video projects and keeping everything easy to find?

There seems to be a bug in Prem where when I apply a mask on opacity, and feather the edges, it decides to also feather the sequence boundary. This should not be the implementation. The mask boundary should be the only edges that are feathered. Is there a setting to fix this?In the attached screenshot, I what the feather on the upper edge of the mask only, not the left and right sides of the composition/sequence bounds.