After Effects

Buongiorno a tutti, mi si presenta il seguente problema nell'utilizzare After effects aggiornato all'ultima versione: Praticamente il mouse si muove al rallentatore e se ne va per i fatti suoi, cosa che non succede in nessun altro programma. Lavoro benisimo in Premiere Pro, in Photoshop.... Come mai mi succede questo solo in After Effects?

I got this when I tried to update the latest AF.  This happends randomly on any update from Adobe.  I have to reinstall the cloud app to fix it. 

I am getting completely ignored when it comes to buffer expansion via SmartFX and I do not know why. Here is what I learned until now: - Both rects must be set to the expanded rect- Account for buffer expansion in SmartRender Here is the issue I currently have (expanding the buffer 200 pixels in each direction): The buffer only expands in the top-left part and it looks smth like this: It should clearly look something like this instead: Now, absolutely no one wants to help, I don't have the slighest idea why this happens. The buffer expands in the top-left direction but it shrinks in the bottom-left direction. It does not make any sense. Here is my current code (btw if you set both rects to the expanded rect, PF_RenderOutputFlag_RETURNS_EXTRA_PIXELS is not needed: static PF_Err PreRender( PF_InData* in_data, PF_OutData* out_data, PF_PreRenderExtra* extra) { PF_Err err = PF_Err_NONE; PF_RenderRequest req = extra->input->output_request; PF_Checkou

After installing the 2024 version, such a miracle appeared. 20GB of RAM is allocated only on the AE, the cache was cleaned, the drivers were updated. A difficult project or an easy one is such a problem anyway.

The audio just is out of sync and speds up or slows down without no reason to, idk what to do

I've noticed only recently that whenever I opened After Effects, I'd consistently get a pop-up that warns me about my disk cache being almost full, and like normal I purge all memory and disk cache like everyone else would. But although it would say 0KB after doing so, if I close the application and open it up again, the pop-up comes back without issue, and when I try to clear it, it would say (insert number) GB once again even after I cleared it.  If someone can give me some advice, please let me know! I'd greatly appreciate it.I'm using After Effects 2023 on an i7 2022.     

As you can see in the video, I can't change the resolution of my composition. No matter what I select, it always stays at full res. I'm seeing this in all projects since updating to 25.x – not sure if it's unique to 25.5.Has anyone seen this behavior? Bug? User/config error? AE 25.5.0 (Build 4) on Mac OS 26.0

I've got a 32 core threadripper with 256gb ram 10gb graphics cardrunning after effects beta, just installed.Have it set to multiprocessor render.while rendering, either on render cue or media encoder:Max cpu use around 45% but consistently around 18%RAM usage around 30 - 50%GPU usage around 1-2%On my smaller machine - 6 core, 64gb ram, I was hitting close to 100 percent CPU usage.I'm exporting PNG sequences from After Effects, tried quicktime and not much difference.Any ideas of how to get all 32 cores working?

Hi everyoneIs it possible to apply to upload AET templates?

So I need to recreate this https://pin.it/34efBKgje video for a client. But instead of the two characters, they want two puzzle pieces like this https://in.pinterest.com/pin/20758848277417701/ walking in and then getting into the puzzle. and then I also need to know who to do the heart+ puzzle animation at the 0:31-0:36. I can use after effects, photoshop, and illustrator. i just don't know how to go about this. Any help appreciated.  So far what I have.An illustrator file of a jigsaw puzzle. However, that doesn't have the pieces that match the bride and groom shape. In the sense, the groom has 1 head and 3 "joinings" and the bride has 1 head, 2 hands and only one joining. And the jigsaw puzzle is all the same. two heads, two joining. How do I change that. If possible please give as detailed an explanation as you can. Apologies if this is very difficult to understand. It's 2AM where I am and I have no idea what to do.

I open up After Effects like normal and can animate etc also rendering fine.Its frustrating when i move shapes around the screen it lags alot.Is this to do with the AMD 9070 not optimised for it yet? I change the GPU Sniffer to GPU Sniffer 123 and it works like butter. Pc specs:Amd Ryzen 5 7600x32gb Ram 6000mhzm.2 7000mbsAmd 9070850w power Is there another solution this weird laggy bug without changing the GPU Sniffer name?

I have an issue where a particular EXR sequence pulls in either a black frame or the start frame on certain frames in the sequence. Opening the EXR is DJV Imaging does not present the issue.Copying the EXR locally and importing does not fix the issue.Purging all caches does not fix the issue - sometimes the preview of the EXR looks correct without pulling into a comp. Pulling it into a comp the issue presents itself.Changing from hardware rendering to software rendering does not fix the issueDowngrading AFX to 25.3.2 fixes the issue

Hello,A bug drives me crazy since several days : I'm creating a video, made from images and other videos. As I already read several other topics about this issue, I took care to set all my videos and compositions to the same framerate (30/s). Some of the clip video I used are precomposed, have masks and some simple transformations. Some layers are time-stretched. At first, everything works well, I can open my projects, continue working on theme, closing them and continue later. Until a random time when After Effects decides to stop working as it should and corrupts some of my compositions with this error :"Overflow converting ratio denominators 17 :: 19"I can still preview my project but almost all my layers disappear from the time line. Then when I try to delete some layers to ckeck which one may cause the issue, I get these messages :14264 RenderThreadExecutor 1 Creating executor with 4 threads.And After Effects crashes. Opening past autosaves also result in the same i

I'm uploading screenshots. I've created a number that increases by one unit for each frame. I want to use Time Remap to select any number in the higher composition. Unfortunately, it doesn't work at all. No matter what keyframe you set, a different number is displayed (see screenshots with three keyframes, which are all the same, but the result is different. Linear interpolation). I don't know which versions have this bug. I'm using 25.1 (the later versions have completely different problems, which is why I can't update yet). If this bug has already been fixed, then I know I can't avoid updating.PS: Number 54 is completly missing.  Thank you!   

I had downloaded after effects 2025 and in just day one i am facing issues like this it keeps saying that "Chunk in file too big-Probably unsupported file version (33::7).How should i fix this problem pls reply as soon as possible as i can't use my plugins for my video which are very nessesary.Pls fix this issue.

I've been searching for a solution to this problem and haven't found anything. I'm hoping someone here can help. Pics are attached.Working on a video and the setup is as follows:-Footage from Alexa 35 (ProRes 4444)-Renders from C4D octane (working in sRGB linear, octane set to ACES cg, exporting ACES cg EXRs)-occasional sRGB images-Compositing in AE set to ACEScg, 32-bit-Windows 10 pro, latest version of AEI can't figure out why different comps are showing color differently. The main composition where I'm animating looks correct (or at least the way we want it to look). The Main composition, within which this "scene" comp sits looks overly dark and contrasted. The pre-comp used inside of the animation pre-comp also looks overly contrasted. I can't get any settings to change this. Turning off 3D cameras, changing bit depth, interpreting footage differently.  Anyone else experiencing this? Do I have some setting somewhere incorrect? Is there an issue with my card (RTX 3080Ti)?

Good afternoon. What is the proper way to edit a Rotobrushed layer after Effects Controls have been added?  With Effects Controls turned on, the mask line is warped to accommodate the effects and using the brush seems strange.  With Effect Controls reset,  the mask is a straight line again but seems to have migrated from its original position.  What happens is this:  After rotobrushing a layer, I turn on the Effects Controls, review my work, make a list of changes, then reset Effect Controls to begin editing; but my mask seems to have jumped around and I have to go through the review process again. Just looking for a work flow that makes sense.  Thanks so much.

Since version 17 of After Effects, this shortcut no longer works... A very annoying problem for a super useful shortcut. Is version 17 have an anniversary?The shortcut setup is correct, if I click the 3 keyboards the After Keyboard shows me that it should work on shortcut preferences. But not works.I updated to version 18.2.1 right now and the problem continues. By the way, the keyboard shortcuts panel only shows me the correct function of the keys if I don't click ctrl first then shift or D. If I click ctrl first, it doesn't recognize either the shortcut. In the timeline it doesn't matter, it doesn't work anyway as you can see in the gif attached.

Bonjour,  Je vous écris parce qu'après une brève recherche je n'ai pas trouvé de solutions à mon problème sur After Effect..Alors voila j'ai commencé un projet, un jour je l'ouvre et je réalise que je ne peux plus afficher le point d'ancrage sur mon texte et cela sur tous les textes. Impossible d'afficher l'outil de déplacement arrière et cela, même avec le raccourcis (Y) . Je pense que cela est dû à une mauvais manipulation de ma part mais impossible de trouver dans les paramètres ou je pourrais le réafficher. Avez vous une solution pour ce soucis ? Je rappelle que je suis sur la dernière version d'After Effect !  Merci d'avance ! 

Hi. I'm having an issue with a single layer in an animation which I am exporting through bodymovin.I am using multiple track matte layers that sit underneath each shape layer of the penguin. The pink outline is the shape layer I am using with inverted alpha matte layers. This all plays perfectly in after effects but when I export out through bodymovin, the white belly does not mask (see screenshot on beige background).Is there a way of sorting this? I have tried auto tracing the layer and masking it, precomping the layer and masking, adding the white belly layer into the body layer so that it moves with it, and parenting the white belly layer to the body and masking. I have also tried putting the mask on a solid layer, and also creating a mask that is the opposite shape of what i've drawn, covering the area that the penguin is diving.I'm using After Effects 25.4. Any help would be so greatful.Thanks!    

I noticed today that when using a Gaussian Blur effect (and most of the other blurs) with Repeat Edge Pixels disabled combined with a Turbulent Displace effect in version 25.4, the blur seems to cause the bounds of the layer to shift towards the top left. It doesn't seem to matter what the Turbulent Displace settings are either, but it only happens when both effects are applied. I also reinstalled the latest version of 24 to test as I've never seen this happen before, and I wasn't able to recreate the issue there.Other users were able to confirm that they could recreate it on their end as well. I've attached a couple screenshots and a quick demo video showing the problem.

So in ae, the order which is happening behind the hood is:Adding Effect on Layer -> Translate Layer Bounding BoxorTranslate Layer Bounding Box -> Adding Effect on Layer

okay so i have this footage of a green screen which I want to track but failing. btw this is an AI generated clip. I tried Mocha AE to track the screen but the surface distorts after a while even when using points mainly because i didn't use markers, any suggestions?This is what i am getting everytime. Footage in question 

Hello everyone, I would like to know if there are shortcuts to be able to quickly access the modification of the points of a path or a mask path, without having to manually open the various steps of a level (SEE ATTACH IMAGE). Exist a rapid shotcut to select point?THANK YOU FOR REPLY.