Audition

Hi! I'm trying to export a range marker I created in multitrack, but the options to export are greyed out.Adobe docs say I have to be in waveform... why can't I do this also in multitrack editor? Any work arounds/solutions? I'd rather not willy-nilly just use the time selection tool for exports.Thanks

Folks,Trying to clean up a poor quality audio track as best as is possible, and not happy. Here is a folder with a segment of the original along with a segment of what I've done so far (as of this moment it is still trying to upload the small files, 4.6 MB each):https://adobe.ly/2H7mPylIf these continue to take forever, I'll post a link to a Google Drive Folder.You'll notice there is a fan (that is oscillating), and a very quiet voice (there was a mic, but folks didn't want to use it).Any suggesting on how to improve my efforts, or how to try again on the original is deeply appreciated.If I get permission, I'll post a link to the entire recording when it is done; then you will know why this is so important.PKM

This might be impossible, but I thought I'd ask. I frequently have to edit the audio (or video with audio) of my husband speaking bilingually (45 minute Bible messages going back and forth between English and Japanese). He's a native English speaker, so that part is fine, but when he is speaking Japanese, he has a habit of mispronouncing some words that should have a long O sound (e.g. "cope") with /ɑː/ instead (e.g. "cop"; "ah" as in "father") or half-way between the two vowel sounds. Sometimes I can find another place where he said the same syllable correctly and splice it in, but the pitch is almost never the same so it sounds a bit disjointed, and sometimes I can't find a decent replacement at all and have to just live with it. The current message I'm working on has three such mistakes within less than a minute!So I'm wondering if there is something I can tweak in the frequency spectrum or something, so that the ah sound more resembles oh. A common word he does this to is "honto" (

Reviewing a few tutorials I have not found the answer to what I am sure is an easy solution to my problem.I laid down a music track in waveform. Saved it. I then inserted that track into a Multitrack session. I previewed it, It played. I edited it. When I went to play the track. Nothing. I can't get the edited track to play. I've explored around but to no avail. I am certain it is a simple oversight but I am new and trying to learn my way around. Thanks for any helpful advice.Brien[Mod note - title has been altered to reflect thread content. If you start threads, please give them sensible titles, otherwise other people with similar problems won't be able to search the forum for any potential answers]

Hello all!I'm an audio book Producer for ACX, but I have yet to figure out how to make my job easier. The audio file's Total RMS must be between -23 and -18 dB, which raises the True Peak significantly. I was wondering if there was any way of targeting all of the "wave crests" (my sound wave vocabulary is limited, sorry) that exceed -3 dB and making them all lower to about -4 dB all at once? Currently, I'm going to every single crest and lowering the dB by hand. So basically, is there any way to lower all crests above -3 dB at once?Thanks in advance!

How can I completely silence the sections between vocal phrases? I find myself doing this manually, which as you can imagine, takes forever. And I did try the noise gate(s) in the Dynamics Processing section. But that was much too complicated, and it seemed to affect all audio (I saw even the vocal parts come down in volume when I applied one of the presets).All I would like to do is select any area of the recording that is less than, say, -30 or -40 dB, and completely silence it, leaving the actual vocals alone.This sounds like a traditional gate. But I'm having trouble finding anything that simple in AA just now. I must be missing something.Thanks!Ken

Hey guys, I'm trying to get better audio quality from my mic (AT220). When I do anything with it, the sound peaks and doesn't sound as crisp as it should.Here's a sample: test.wav - Google Drive Any ideas how to get better sound?Thanks

I am trying to move a Pink noise I generated into a multi-track session. However, after transferal, it normalizes the noise, and results in sounding different from how it sounds in waveform editor. Is there a way to retain the DC offset from the waveform editor into a multi-track session?

Hi,I'm using Audition CC 2017. I'm currently working on a project that requires narration. I wanted to apply markers on a single track and later select all the markers at once to perform operations on it like Amplitude, Filter and EQ or Fade envelopes. But not on the rest of the track.How do I select all the markers on the track at once without selecting the rest?Please help.

Hello - I'm really hoping someone can help me with this...I use Audition for several hours every day. About a week ago I finally installed Audition 12 after using Audition 11 for a long time, and everything migrated over perfectly. But then earlier today I shut my computer down (after saving everything and closing Audition as normal) and then when I just turned it on again and opened Audition, suddenly all my custom effects racks are empty. I tried opening Audition 11 and I got the same result. To be clear: All of my individual custom named effects are still there, and all my plugins are still there, and all of the effects racks that come built-in as Favorites still populate properly - but when I open any of my custom effects racks, they're just empty. None of the individual effects are there.I'm running Audition on a Windows 10 desktop that I've been using for a couple of years - I've had other problems with Audition before, but never this. The only thing I did differently this time w

I am using Audition Cs5.5, Creative labs sound blaster and window 10(64)I want to copy recordings from a hand held Dictaphone to my PC using Audition.  I have at the moment a very short audio cable connecting the output of the sound blaster to the input. The idea is that I can play an MP3 music song and get it to be picked up by Audition. I have gone to Edit -> preferences -> Audio hardware and picked (Microphone (SB Audigy). It seems to try and work but the levels are rubbish. I think you guys could tweak this for me.TIAPaul

I am getting the following error on my Dell Desktop.I have premiere cc also  installed on my laptop and not getting this error.the versions are the same on both systemsCan anyone help?I tried installing and reinstalling several times and no luck.

I just installed a 3rd-party VST effect bundle - Accusonus ERA. I am using these tools quite a lot, but in order to access them, I have to go through multiple layers of directories in the Effect menu. For example, I open the Effect dropdown. Then I hover over "VST," they I hover over "Restoration," then I hover over "Accusonus," then I hover over the actual effect I want to open it. That's pretty darned involved and takes up precious time.Is there a way I can set up a shortcut to go straight into the Accusonus folder and see all those tools? Or maybe to actually just open the ERA Noise Remover, for example. I don't want to APPLY the effect via a shortcut (as each file will often need different treatment). So "Recording" a FAvorite wound't work. But I'd love to be able to just directly open either the main Accusonus folder to see the tools, and then click on one, or to have a different shortcut for each of the 6 ERA tools. Is this do-able?Thanks!Ken

I've looked around in the forum, and I haven't seen a post with this same error code. I'm just learning Audition- so please bear with me if this question is goofy!I'm trying to open a .wav file that has a split track in it, because I want to pull the audio from just one of the tracks. But I can't get the file to open. I keep getting the following:Error: This file is not supported by libsndfile.  Code: 65.  Error in WAV/W64/RF64 file. Malformed 'fmt ' chunk. Is there something that I can do to fix this, or is this sort of file just not editable in Audition? 

Apologies if this has already been asked for many other times, doesn't hurt to make some noise about it.I would love it if Adobe introduced gap closing much like you can do on Premier Pro, where you double click in the gaps, and hit delete and it budges the rushes, or in this case, the waveforms right up to each other. Feel like this could save loads of time!Zooming in and out, and selecting in some cases hours of chopped audio can become a little stressful that a mistake can get made down the line when going back and editing amends. (Still scarred from the bug where it was moving things out of time and not in sync when snap was on)

Hello all,I am using Premier Pro to edit a movie..Whenever I edit an audio track in Audition the playback in Premier pro isn't correct.the track starts off with very little treble (sounds muffled)  then corrects itself, almost like a fade...What am I doing wrong?

haven't used audition in a while.  what is up with the yellow volume line?  I am trying to add keyframes and I can barely see the line on the selected clip.

Why are all the Multitrack mp3 individual track files exported the same length?  Is there a way to export them without the silence at the end? I want the exported files to be the actual length of track.  For example, I have three tracks.  One is 30 seconds long, the second one is 20 seconds, and the third is 10 seconds. I don't want them all to be 30 seconds with silence.

Hi,CS5.5.I am using Zoom R16 via USB ASIO and it is connected and showing as the Hardware source okay.I have the input chosen and when I hit record and talk into the mic it shows okay on the VU meter at the bottom but no wav shows and it doesn't actually record.What could be the problem here?Thanks,oz

So yeah, my workflows are totally shot after the new update with helpful graphics bugs like Running nVidia 1060 6GB with the latest drivers and I tried uninstalling and re-installing the apps. Since this seems to be a really common and disruptive issue, I'm really hoping to get at least a month or two of extra subscription time for free from Adobe in addition to getting the apps fixed ASAP because this is such a massive disruption of my production environment...

I've been experimenting with speeding up spoken word clips (with a corresponding video clip) and I think I can get away with speeding up by 10%, keeping the pitch the same. In fact I know I can get away with this because I've just published a youtube clip and no one commented on it!Currently I just choose Effects/Stretch and Pitch and simply reduce the stretch to 90%, keeping the pitch at zero semitones. This seems to work ok but when I then run my other filters (single band compressor, normalise etc) and listen to the clip with good headphones I can hear some minor artifacts. Nothing the general public have noticed but I'm wondering if I should run my filters first and time stretch last.Any tips on speeding up spoken word audio I should consider in order to preserve the integrity of the original recording?Cheers

Thank you. I found a YouTube video that helped and my audio was sounding good, but now my tracks are skipping in Audition. Any idea how to fix this? I closed the program and re-opened it and the audio is still skipping very badly. However, when I mix down it sounds fine. Thank you again.

Is there a way to create shortcut to move the playhead back a certain number of seconds? I'm picturing this for a quality control operation where you could stop the playback, hear the last few seconds and then continue the playback. Thanks in advance!

Did a remote recording session using an H6 as my audio interface and and has WASAPI selected as my Device Class. the Latency was set to 400ms and Sample Rate at 48kHz. All levels were nominal. Monitored the recording off of the H6 headphone jack and everything seemed ok. When reviewing the audio at the end of the day, got a bit of a shock when all of the files had this digital distortion in it.https://drive.google.com/file/d/1_r-Qg-IbpmiqI9ygFyVrBywO7shUD44b/view?usp=sharingAnyone have a clue whether this can be fixed? I tried running it through the de-clicker, but that didn't fix it.

Hi Everybody,I have bought a new camera for making videos on YouTube.The Canon lens I am using makes a slight clicking noise whenever it changes focus and the microphone picks this up. It's not very loud but noticeable.I have never used Audition before and was just wondering if this is something Audition can do? Also, moving forwards, I would probably want to hire somebody to do this for me due to the amount of videos being recorded, is there somewhere, a such as a forum or website where I can hire those who are skilled in Audition?Thank you very much for your time .Regards,Ross