Bridge

... in the preview? Bridge CC 2017 release on W10?

I have added keywords to my illustration assets that I used for searching in Adobe Bridge. Is there a way to search for assets using keywords rather than just the file name in Adobe CC Assets?

I am trying to install the output module on Adobe Bridge. I am totally new to Creative Suite and photoshop. I can't find any information on bridge extensions at all. Here's the page I found on installing the output module- http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.htmlI downloaded it but after that is says to copy it into the extension folder. Where is the extension folder? Is it is Bridge? Is it in Finder? Any information on extensions is much appreciated! What exactly are extensions? What is the difference between the extension folder and extension manager? Thank you!

Hi,I work in Lightroom where I fill in the caption and rate my pictures with stars.Normally when I open the same set of pictures in Bridge the caption is filled in, with the same star rating.But since this week not anymore. When I open my folder with pictures the caption is blank and no rating. When I want to move my folder to my back up disk, I will be moving pictures with an empty caption. So now I have to fill in and rate the pictures again also in Bridge Does anybody know, how to solve this?

I upgraded my version of Bridge CC to cc version 2017. When I click on the icon it starts for about 1 to2 seconds and then shuts itself off. I have a iMac running OSX Sierra. I tried to reset the preferences to no avail. the version I upgraded from was Bridge CC2015.  This issue initially started when I tried to install the output module for bridge CC 2017.

Using Window 7, with CC17 - everything seems up to date.I am using Bridge's batch rename to rename mov clips. When I select all of the clips in the folder and perform a batch rename one clip is left off.  This happens repeatedly on multiple different folders of movs I've tried.  While I can easily rename the single missed file it is now out of order in the name's sequenial listing.  I have double and triple checked that all the files are selected when I perform the batch rename.Any ideas or advice?thanks,  jeff

When I select and double click a group of *.NEF files in Bridge CC (2017) I get the following popup message: Metadata write operations pending. If you continue and apply Camera Raw settings, they may be overwritten by pending metadata write operation. Not sure what this message means, but if I continue there appears to be no problem.  Any info on this would be appreciated.

We are having the issue with not being able to see our Camera Raw files in bridge.They do open in photo shop, but the files are not visible in bridge.We are currently updated with the latest bridge as well as camera raw settings.Camera raw file is from the Canon 5D Mark 4.We also tried to clear the history in bridge, including the cache.Any Suggestions?

I have both the Creative Suite 6, and Photoshop CC on my computer.  When I use the "Load files into Photoshop Layers" tool in Bridge CS6, it loads my TIFF files into layers in Photoshop CS6, but I'd like it to load those layers in Photoshop CC instead.  How do I accomplish this?  In Preferences, I have the File Type Associations for TIFFs set to Photoshop CC 2017.

Hello! I can label and star rate every file on my hard drive except the audio files from a number of sfx libraries I got from different websites. Neither hotkeys nor label menu or rating column work. What is that? Some bridge settings or some kind of embedded protection these audio files may have? Thanks for your time.

If you close out Bridge while you have Raw files converting, the dialog box of the conversion remains open. Is there a way to re-open Bridge while the conversion is still happening? Thank you

I just installed Photoshop with Bridge for a week's free trial. Before I consider purchasing it, however, I'd like to know if there are any features to remove print (specifically, type) from a photo in my pictures folder. I am having a hard time trying to figure out how to do that.Please tell me how to do that. Thanks.

Hey there,So I am very unfamiliar with Adobe Bridge. I have read up on it and I understand that it allows for a more efficient way of organizing, naming, and cataloging photos and other digital assets. The thing I wanted to know was are the tags and labels you apply to files on Bridge universal? So if you were to upload an image that was handled on Bridge onto Flickr, Barberstock, or some other photography platform, would the image's information and metadata be retained? Thank you.

Hi BR forumI can only set up 21 favorite posts/items in Favorite panel in Bridge CC - I have tried to reset preferences but to no avail.Is there anyway I can get more than 21 items in Favorite panel...?

I was working on a batch of photos in Adobe Bridge when I accidentally hit my hard drive cord, which lost the connection for a second. When I went to hit 'Done' a message box came up that said that the files couldn't be found, and all of my edit work was lost. At least everything since the last time I hit 'Done'. It was two hours of work and hundreds of photos that I had to redo. I spent awhile searching for some kind of autosave or recovery option but none seems to exist. Am I missing something? Is there a way to have an autosave on like there is in Premiere so that if something happens, the work will be saved as I go? Or is there a way to recover that data so I don't have to redo it all? I can't seem to find an answer to this. If someone could help me, I would very much appreciate it. Thanks,- R

In the Bridge select The image to include in the contact sheet then choose Window ,Workspace,  Output  The Bridge I am using dose not have the Output where can I go to access it

After an update 2 weeks ago to Bridge CC (2017) I've not been able to open or use the program. I also attempted to add on the output setting for creating pdfs - perhaps this is an issue? Please help. It might be my most used program (I'm a photo editor) and I can't figure anything out.

I am using Adobe Bridge 2017 on a Mac. What does the New Window command do?I thought it created a new window to import photos in but it didn't seem to do anything form my vantage point.Where should I go to delete these new windows?Thanks[Moved from the non-technical Lounge Forum to the specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Quite often when I select a directory in Bridge I have to wait a minute or more for it to allow me to select a subdirectory.  I have to wait for the program to show the thumbnails for everything in the selected directory.  Needless to say, this causes huge wastes of time when all I want to do is get into a subdirectory.Is there a preference somehwere that tells Bridge to prioritize showing subdirectories (and, ideally, filenames) BEFORE generating thumbnail images?  Such an option would be a tremendous speed-up for my workflow.If it matters, I'm on Windows 10.  And I've had this same problem with both CS6 and the CC version of the Adobe suite on several different computers.Thanks,rgames

Bridge has been slow and freezer 8 out of 10 times this is after the last update

Hello,I would like to know if it is possible in Bridge to transform/export collections into "real" windows files?I explain : I have some photos that I'd like to put into differents files, without creating a duplicate each time, for example I have a head of Augustus, and I want it to be in an "Augustus" file + an alias in a "Museum name" file. This is exactly what Bridge does in Collections, but now I want to have access to the files in my windows documents and not ony in Bridge, to sum up to export/transform those collection into real windows files with alias inside... if it is possible!Thank you so much for your precious help!Paulineps. I'm using Bridge CC 2017

I work for a company that has yearly print ad campaigns. The InDesign ad files are provided to me by our parent company. All I have to do is resize the ads for each publication we advertise in. It adds up to several hundred ads of all different sizes each year.Each InDesign document is sized to the ad dimensions (as opposed to the ad layout being placed in the middle of an 8.5 x 11 InDesign page, for example). All of the ads are stored in one folder.When I have to do a new ad, I would like to be able to quickly see if I have already done an ad in the requested size or close to that size. It would greatly reduce or eliminate the time it takes to resize ads.I thought there would be a way in Bridge to quickly see the dimensions of each ad (in inches). In Bridge / Preferences / Thumbnails / Details, you can click the checkbox to show thumbnail metadata and select "Dimensions (in inches)", but it appears to only show dimensions for JPG files, not InDesign files. Same with Bridge's Metadata

everything is in the title, i can't manage to installe properly the pdf module on bridge CC 2017, the menu is present but totally empty, please, anyone could help me on that?Thank you!!!

I have no idea what I have done. I'm using Bridge to put together an InDesign project, and I had all my photos as thumbnails in View. Granted, I thought these old eyes would benefit from a larger size of thumbnail.However, while I was dragging a photo from Bridge to ID, I accidentally somehow got hold of the photo and made it way larger. Since I don't quite know what I did in the first place, I don't know how to make the preview photos smaller. I don't necessarily want them to be an inch or so high, as they were before, but I don't want them this big.See screenshot: