Bug Reports

Hi,There is a nested sequence, where there is an adjustment layer on top and below are all essential graphics texts set for my video. I have applied 'wave warp' to my nested sequence, it is working on my timeline when I move my cursor there, but on exporting, that effect is not there!!What can I do in this case?

I have since the latest V.24  noticed increased issues with audio. When trying to reduce mulitple clips gain, by negative values, the clip instead is louder. In addition, the pen tool has somehow become less consistent in adjustments, it's become harder to get the right value to reduce audio.  Finally once clips are labeled for essential audio as dialog, any changes to them seem to be inconsistent with gain changes. 

Whenever I open a project (since the newest 24.5.0 build) with clips that have the warp stabilizer effect applied, the project opens with the clips automatically unrendered - so the red bar is show above the clip in the timeline. This affects playback of the clips as they will not appear in the program monitor until the issue is resolved. This of course creates an unnecessary pause in my workflow.  In order to remedy this issue and get back to editing and playing the timeline smoothly - I go through my sequence and disable the problem clip then re-enable the clip. I have to do this to each of my clips with warp stabilizer applied. It has to be done with a single clip as well. Selecting 2 clips and disable/enable will not resolve the issue. I'm on a Mac studio M1 Max64gb memoryOS sonoma 14.5Editing clips off a samsung externall SSD

I'm still having problems with duplicate frame markers on 24.5. Anyone else???- only showing on one clip- doesn't appear at all sometimes- doesn't disappear when required. Almost showing false duplicate frame markers.- Keep having to re-open the sequence to show accurate markers.

While selecting clips in the timeline panel, the menu item "File > Get Media Properties for > Selection" is greyed out. It works fine on clips in the project panel, which I'm using as a workaround for now.  Using Version 24.5.0 (Build 57). It worked fine in the last version when I used this feature a week ago before updating. On a MacBook Pro, 14 inch, M1 Pro.

When editing a sequence into another sequence in Pr V24.5.0, scaling effects are not carried over on some clips.  This occurs when writing as individual clips.  Smae occurs during copy and paste as well.

Last few days I have started to notice strange things when I use the 'save as' in PP - the forward delete key on my keyboard has become an 'enter' or return key. For example if I type a project name and try to forward delete a character the 'save' button is activated.this is only happening on one workstation in our facility - I have tried everything to fix this to no avail. Machine is a 2019 iMac, 128g ram 1tb ssd, PP v22.6.4 ... the keyboard functions as it should in the Title window and in apps outside PP it just won't forward delete when typing character in the save as window which is a bit unsettling.I have reset prefs - installed a newer version of premiere (we need to stay on V22 due to several editors working on the main project) I have removed my keyboard shortcuts and still this problem persists with the adobe default shortcuts.any help appreciated Steve

Hola! Cuando aplico el efecto "Transformar" para realizar una animación, en el momento que configuro el "Ángulo de obturación" (por ejemplo, de 0 a 200) para crear un desenfoque de movimiento, la animación se cambia a un extraño desplazamiento lateral. No se arregla renderizando con la tecla enter y mi versión es la de 2024.  Qué debo hacer para que no me siga saliendo ese desplazamiento?   Mod note: Please do not type in all caps.

Hello!  Apprecaite any guidance on this issue: I'm working on a brand new Mac Studio Ultra M2 128 GB RAM in Premere 24.5 My project is a relatively simple multicam shoot with 2 cameras, Pro-Res 4444 and I'm working with proxys ProRess 422. My issues is I'm having serious lag and dropped frames in Multicam view.  I've been banging my head against the wall trying to troubleshoot this.  The crazy thing is, that I created a new project and was able to get one of the multicams to work seamlessly, even without attaching proxies.  The others multicam sequences that I created the same exact way are lagging, dropping frames and effectively unusable.   I've been trying to figure out why one sequence works and the others don't but they have identical settings, and identical media.  It's driving me crazy!  Is this an Adobe Premiere bug or am I missing something?      

Premiere Pro Version 24.4.1 (Build 2) 2017 iMac ProProcessor 3GHz 10-core Intel Xeon WGraphics Radeon Pro Vega 64X 16GBMemory 64GBMacOS 13.6.6 Scenario: Audio track A5 is a soloed music track. A1-A4 are unmuted (but are not heard because of the soloed A5). Issue 1: When creating new audio track A6, A6 audio is heard with A5. This occurs whether using the menu to create a new track or when dragging and dropping an audio source to the bottom of the timeline and automatically creating a new track. It does not make a difference if the timeline is paused or playing when A6 is created, A6 will still be heard when A5 plays. A6 mutes when M is clicked but is heard with soloed A5 when unmuted. However putting A6 into solo with A5 and then removing it, stops it from being heard with soloed A5. Issue 2: If track A6 is deleted and then recreated, a new issue appears where sometimes A6 is not heard at all. Even when all other tracks are muted or it's the only soloed track, it is

I have used 3 PNG files in my project and changed the opacity of each, now the clips can neither be rendered nor exported. I get the following error messages. Does anyone know this?

After applying effects and volume changes to an audio file in Adobe Premiere 24, it is impossible to remove attributes. I now have to abandon all of my work because my audio files are glitched and I cannot remove the effects no matter what I try. 1. Open Adobe Premiere 24 Project2. Add effects and volume changes to an audio file3. Right click -> Remove Attributes4. Leave all selected audio attributes in selected state5. click "OK6. Audio attributes DO NOT CHANGE7. Right click -> Remove Attriubutes8. Select/deselect any attributes9. Save10. Audio attributes DO NOT CHANGE11. Delete media cache12. Restart Premiere Pro13. Repeat steps 1 - 10 - ATTRIBUTES DO NOT CHANGE14. Restart computer15. Restart Premiere16. Repeat steps 1 - 10 - ATTRIBUTES DO NOT CHANGE   

hey adobe .. whenever i try to render in to our the timeline from red to green or yellow to green suddenly after rendering the program panel got black lines all over the program panel .. it doesnt get completely black it goes with black lines .i have 2024 version of premiere pro gtx 1650 amd ryzen 7 5600x48 gb ram  plz tell me what to do .

  here's what it looks like when unpaused and playing :but it  gets clear when paused:  

When Prerender, black vertical stripes appear. This is not visible on the video render, but there is something in the composition that makes it very difficult to work. I tried reinstalling Premiere, but without success. Tell me what to do.Plugins(installed but not currently in use):BCCSapphirePremier composerRed GiantPremier Pro 23.5

On windows, holding Alt+Shift should allow you to replace a clip on the timeline with another copy. In my case, I have to do this because I am replacing footage in an existing project with footage from a production. Since the footage in a production, annoyingly, doesn't show in your bin at all this seems to be the only way to take a timeline that uses footage from a production and do that in a way that actually uses the footage from the production. It's the same footage, so why would I want to do that? I'm sure someone would ask that. The answer is because we created a premiere file for each shoot already and created proxies for them. I figured out a trick to make proxies with the stupid headache of Premiere being incredibly difficult when dealing with audio mismatches. Yes Premiere I'm aware that my proxy file has audio channels and the S&Q footage that we shot has no audio. Since proxies already exist, but they can't be assigned to half the files because of various thin

My exported video is frozen.  The motion graphics, audio, and time of video play correctly, but each video clip is frozen even though they switch to each video clip at the appropriate time. I exported a project initially and it worked fine.  I returned to the project to update some text on a motion graphic and every video on the exported version was frozen.  I tried exporting multiple times, but was unsuccessful. I edit short 10-15 seconds clips using the same export setting each time and approximately every 3rd time that I attempt to export a clip, it is frozen on the exported version. These issues did not occur previous to the latest update. I am exporting using match source-high adaptive bitrate, H.264, render at maximum depth, use maximum render quality, lumetri color grade applied to the clip, software encoding, VBR pass 2, target bitrate 48, maximum bitrate 60. The fact that it only occurs periodically leads me to believe it is a software i

Hi there. I am experiencing issues with how Canon C200 footage, shot in C-LOG 3's colour is being interpreted by Premier Pro 24.4/24.5.0 on OSX 13.6.7 (22G720). Essentially, when opening projects (from this April 2024 and before) which were edited using versions of Premier Pro prior to the 24.4 update, the colour of C200 footage does not match 1:1 with exported timeline master files (Prores 422 exports of final edits).An example project is using two cameras, a Canon C200 and a Canon C300, details of colour settings and file encoding are below:1. Canon C200, filmed in C-Log 3 (.MXF OP1a, H.264/MPEG-4 AVC Long GOP High Profile 4:2:0 Unconstrained Coding)2. Canon C300, filmed in C-Log (MXF OP1a, MPEG-2 420 MPHL)I opened the project in Premiere 24.5, dragged in a master file for colour reference (exported from a previous version of Premiere before 24.4), compared the colour of the master file to the same shot on timeline in the project, and colours specifically of C200

I'm getting audio glitches on audio crossfades.Audio is from a 48K 16 bit WAV files (actually audio came from Adobe Enhance Audio website.) Content is voice.I'm generally using 1 frame crossfades or 1 frame fade up/down to smooth out audio editing. On playback, the glithces are there intermittently and sometimes it sounds fine. However, the glitches are there in the exports. I had 9 crossfades in this timeline. Everyone had a glitch in the export. Version of the app: 24.5.0 (Build 57)Platform and OS version: Mac Ventura 13.6.7, M1 Max I'm attaching a screenshot of a fade down that sounded glitchy. These were originally 1 frame transitions. I tried changing to 2 frame transitions and the audio still glitched on export. However, I was more likely to hear it clean on playback with the 2 frame transition.  Here's a waveform and spectrum view of the exported audio from that section of the timeline. The glitch is the spot where the marker is --note how the whole

Has anyone else found that presets don't really save properties properly? When I add the transform effect, set the keyframes very specifically and save the preset, whenever I add this preset onto future files it seems to just have the default keyframes without the nuanced easing in/easing out ramping that I've set. It's a bit annoying as I'm setting very specific ramping that I would like to just add onto a file anytime I need it.

I'm on Version 23.6.0 (Build 65) and have been for a while with no issues on transcription. This morning I tried to transcribe something and the audio is clear as day, and in the middle of transcription progress bar it keeps saying no dialogue found. So I quit premiere and re opened it. Issue persisted. Restarted my computer. Issue persisted.  Opened it in Premiere Beta. Issue persisted. Please help. i clicked create static transcript and it transcribed it in 2 minutes. then i pressed some button "generate text based editing transcript" and went back to "no dialogue found" (i recently wiped my computer about a week ago. installed new OS. i'm even using a brand new user profile upon logging into my iMac desktop in lieu of premiere being unusually slow recently so i doubt its a user profile issue)

Hey,  When I'm editing in Premiere Pro, 4K/8K or just with footage shot on an iPhone, Premiere Pro and my Laptop freezes I can only move my mouse but I can't click on it and then 3-5minutes later my Laptop shuts down.  I had it in Lightroom Classic also once but mainly in Premiere Pro. I think it's Adobe related because with the same footage I can still edit in CapCut. I deinstalled Premiere Pro already a few times but It didn't help. What shoud I do?  It sometimes also happens when I'm exporting. At a random precentages the export freezes and doens't progress anymore. When I cancel the export the same happens as I told here above. 

I have been using the M1 Max + Premiere Pro for years at this point but with the recent release I got problems for about a month or two now which I never had before. When I export a file with H.265 at 4k or 1080p, the file ends up not being playable in preview, QuickTime, VLC, or Premiere Pro for that matter (importing it again into a new sequence). The exported file is NOT playable when exporting h.265 longer than 10 minutes with:- Premiere Pro 2023.2- Media Encoder 2023.2.1- Premiere Pro 2023.2 on M1 with Intel Version (Rosetta)- Premiere Pro Beta 2023.4 This problem is happening no matter if I export with Premiere Pro or with Media Encoder. Export works normally when:- exporting to h.264- exporting with an Intel MacBook to h.265- exporting to h.265 with DaVinci Resolve I've not had this issue in December but it's been annoying recently that I can't use H.265 any more for the exports. I hope this can be fixed / figured out soon. Technical Details:-

when I create a new project on premiere it doesn't let me insert a type of mp4 video file in the timeline, this doesn't concern all types of mp4 files but some, I don't understand what this factor depends on. I have already tried to update all the drivers on the computer but the problem persists, what should I do?

My attachment will show the issue. The playhead will jump if there are stray clips at the end of the sequence when editing elsewhere.