Camera Raw

I have a Canon EOS R6. I have so far edited a session and a partial wedding, my LR randomly closed and when i went back the uploaded gallery was gone. When I tried re opening the cr3 files were no longer appearing/being read. I have everything up to date and have Camera RAW 13.3I am at loss on what else to try. Any suggestions?

Is there a way to automate or script ACR Merge to Panorama feature to process multiple panos automatically? I know how to use Extended Script for batching Photoshop's Photomerge feature, but that doesn't allow me to save the output to DNG. The ACR Merge feature can save to DNG, but I don't know if there's a way to script it instead of using ACR GUI. Thank you.

In earlier camera raws, I had the ability to select the crop I wanted 4x3 and it would remain that way whenever I reopened camera raw.  In recent versions, it defaults to the original camera dimensions.  When I load a series of images , I select all, and deselect each one after I have the desired crop and exposure, going down the line.  If I change one to 4x3 and continue and come to a vertical, then it is the default again and I have to re-apply, and then again, when back on horizontal.  And every time I come back to camera raw it is the camera setting default crop dimensions.Can this custom crop be kept as the default so I don't have to change with every group and batch? It was easy enough before.

The heal/patch tool no longer shows the source of the heal/patch, it just applies some type of selection automatically.  If you hit the / key it simply cycles through a series of different selections, still not showing you the source point - meaning, you can't select/modify the source point yourself. This makes heal/patch now completely useless. Am I doing something wrong?  It didn't [not] work like this prior to the update.

Two days ago I was able to open Ricoh Theta Z1 DNG files. with no problem.  I've opened hundred of these  DNG's in the last month.  Last night it would hang EVERYTIME I opened one. I was using ACR 13.3 when it failed.  I installed ACR 13.1 just now and that works fine. NOTE: 13.3 worked on my DJI Phantom 4 DNG's, but not on Ricoh's.

Hi, I'm using acr 13.3 on a new laptop and I installed some xmp  presets but they are not visible in the preset lists.  I thought it hadn't worked so i tried to install them again and a box came up saying they have been installed already but where can I see them/access them from. help! thanks in advance.   Moving from Using the Community (which is about the forums) to the correct forum... ModTo ask in the forum for your program please start at https://community.adobe.com/

I need to re-number 500 JPGS 

Hello! "Edit in Adobe Photoshop 2021" function in LR works very slow with Camera Raw 13.0 on my new and much faster computer (check specs bellow, Acronis True Image protection disabled). It takes almost 9 seconds to load with already opened PS application and when loaded PS don't switch active window from LR. I tried to install Camera Raw 12.4 and if i select "Render using Lightroom" in warning dialog then it open fast (2 sec) and switch active window to the PS (but with auto-save new version in LR catalog). If i select "Open Anyway" it opens for 9 seconds again.Also i noticed that old system loads all 4 available CPU threads 80+ percent during "Edit in Photoshop" process but new system loads only one CPU thread a time during it (actually it swiches several threads one by one with 80%+ loads).Specs:Old system: Windows 7, Intel i5-3570, PS 21.02, LR 9.1.New system: Windows 10, AMD 3960x, PS 22.01, LR 10.0.

 hello, the cropping tool has disappeared in camera raw filter, when the file is opened it is still there when I later want to crop the image in a picture what was simply done via camera filter is the button gone since the update? Does anyone know what or has a solution?

After updating when I open images from Bridge my camera raw isn't showing any of the tools it's just blank on the side. My macbook is up to date with Big Sur so it shouldn't be a problem with my operating system. I need to get this fixed I'm a photographer and my work is piling up! Someone please help!

I am very disappointed and desperate with the development quality of Camera Raw and Sony A1, the photographs appear broken, especially at high ISO, the colors the same, it is a very big problem, because no matter how much I retouch, it does not improve, instead I have Tried the trial version of Capture One 21 and the sky was opened, the colors appear as I take them and high ISO comes out well and defined. Gentlemen of Adobe this cannot be if I am paying I want the best and you are not giving it to me.

I had the same problem a while back and someone suggested a solution, but I cannot remember what it was. If I remember correctly I had to untick something somewhere. Any help is appreciated.

It might be my Mac, but it almost new with a lot of storage, memory and ram. But Camera Raw 13.3 is not working at all. Everything lags (especially cropping) and takes extreme amount of time! Frustrated 🤯       {Thread title edited by moderator}

Hovering over profiles and presets changes the histogram but the live preview doesn't update till I click. It works in Lightroom and Lightroom Classic but not in ACR for some reason. Hardware acceleration is enabled. Any insight is appreciated.

What a complete waste of time and money. You cant even crop a photo or drag it... good job guys 

Hello! when you open a photo in the RAW camera, the image is not displayed. The photo itself on the screen looks like a lot of stripes and the same thing (some stripes) in the histogram. Please help me fix the error.Здравствуйте! при открытии фото в  камере RAW не отображается изображение. Само фото на экране выглядит как много полосок и тоже самое (одни полоски) в гистограмме. Помогите пожалуйста исправить ошибку.

With Camera Raw 13.3, after I merge raw files to make an HDR and it saves as a DNG - when that DNG is opened, none of the changes made to the basic panel automatically by Photoshop are saved automatically. This problem only occurs with the changes Photoshop makes on its own. If you move any of the sliders before saving, all the changes are saved. Has anyone else had this problem?

I've noticed that every time I use the dehaze slider the white balance seems to be thrown off. 237, 237, 237 becomes 236,237,238 or 235, 237, 239. And no matter what neutral color I click I can never get matching numbers. It is only by setting the dehaze slider to zero that I can get a "true" neutral again. Curious what's going on with this? Robert  

Black window in the pop-up Camera Raw window when trying to use new function and imossible to know if Enhanced function runs or not.    

Is there any way to run two versions of ACR on a MacBook Pro (Mid 2015)/MacOS 10.14? I currently am using Photoshop CC 2018 but would not mind installing the latest version in parallel (in my earlier experience using two PS versions is possible). Creating a second user does not seem to help. The reason I’m asking is that I prefer the workflow of ACR 12.2 but it does not fully support my new camera. Thanks for any suggestions!

The changes made to the histogram in the newest version of Adobe Camera Raw make it hard to see because the colors are pale and the lines, especially on the edges, are so narrow. The gray colored background in the histogram is not the best color for trying to see the new format. Are there any plans to revert back to the previous histogram or is there something I as a user can change to make it easier to see?

Hi, After trying to figure out how to rename a camera matching profile in Lightroom, I attempted to do so in Camera Raw instead. I am using the latest version of Photoshop and Mac OS and have 2 issues now: First, I am unable to rename the profiles. If I open a raw file in Camera Raw, and click on the profile, I can see a section for "Camera Matching" profiles. If I right-click on the images, even when pushing on "option" there is no option to rename an individual profile. But, if I right-click on the "camera matching" header, I see an option for "Rename profile group." I don't know if this option would help me rename a profile, because clicking on "rename profile group" does nothing. No popup window opens at all. Nothing happens. Also, this seems to create a bug, which is that after I click on the option button, NONE of the other options (manage profiles, import profiles and presets, etc.) work. I must completely close Photoshop and reopen it for thos

Hello !There is my problem, i worked on a picture in lightroom and exported it in DNG.When i open it in camera raw, all is ok, the same as in lightroom: and when i open it in photoshop there is a big difference of sharpness and textures: I use LRC and PS since a long time and i never had the problem before.Can someone help me please? Thank you !

when I press the shift key it changes into auto mode automatically andit only makes it hard..

The brush tool in ACR is not working. It seems stuck on the magnify tool and I can not select the brush or eraser. Is there some sort of setting I accidentaly changed? Also the healing brush acts the same. I click on it a a zoom box appears. The brush or the healing icon is always grayed out.What gives?