Camera Raw

Issue: Camera Raw 18.6 on Windows gets stuck in the Zoom tool. When I select Masking and create a new Brush mask, the Brush cursor does not become active over the image. The Zoom tool remains active and prevents me from painting the mask.Camera Raw version: 18.6Operating system: WindowsGPU: NVIDIA GeForce GTX 1650, 4 GBSteps to reproduce:1. Open an image in Camera Raw 18.6.2. Select Masking.3. Create a new Brush mask.4. Move the cursor over the image.Expected result:The Brush cursor should appear over the image and allow me to paint the mask.Actual result:The Zoom tool remains active and appears to "capture" the cursor. The Brush cursor sometimes appears intermittently while moving the mouse, but disappears as soon as the cursor reaches the image. I cannot paint or create the mask normally.Troubleshooting already performed:- Restarted Photoshop.- Reset GPU compatibility.- Tested the GPU settings in both Automatic and Custom modes.- GPU is detected as NVIDIA GeForce GTX 1650 (4 GB).- Ca

This post applies to Camera Raw.Post Lightroom Feedback here   This thread is now closed. Please update to Camera Raw 17.x. If you wish to provide feedback, please go to the new article.   The Photography team is sharing an early look at Generative Remove, which makes it easier to remove unwanted objects and distractions, even on complex backgrounds, with a simple brush stroke. Generative Remove is powered by Firefly AI.   How to use Generative Remove on a desktop: You can find Generative Remove under the newly renamed Remove panel (aka “Heal”). Make sure the “generative AI” checkbox is enabled before you start brushing (note: when unchecked, Lightroom will use Content-Aware Remove to fill your brushed spots).  By default, you will be given a moment to refine your selection with an add or subtract brush. Remember to include shadows for a more accurate result! You can also skip this step by holding down ‘CTRL’ on windows or ‘CMD’ on mac as you finish your bru

Announcing a new feature now in Adobe Camera Raw (17.2) – Removal of Distracting PeopleUnder the Remove dialog, under Distraction Removal, we have added an item called “People”.   This feature supports faster and easier detection and removal of distracting people in an image. It is offered as a Tech Preview in the Adobe Camera Raw Plugin-only and is available now. Please try it out and let us know what works well, what doesn’t work well, and anything that might improve the experience.   Thank you! Peter Baust - Dir, Product Management   Posted by Rikk Flohr  

Description of IssueAdobe Camera Raw repeatedly encounters a GPU out-of-memory error during normal GPU-accelerated image editing, particularly when working with masks.The error displayed is:“The graphics processor has encountered an out-of-memory error. Due to a run-time error, GPU acceleration has been reverted to Limited for the remainder of the session.”This occurs on a very high-end workstation with an NVIDIA RTX PRO 6000 Blackwell Workstation Edition with approximately 96 GB of dedicated VRAM.Importantly, the Camera Raw diagnostic log shows that GPU initialization completes successfully and that approximately 100 GB of GPU memory budget is detected. The actual failure occurs later when Camera Raw attempts to allocate/render an image mask texture.The relevant Camera Raw log entries are:Determined GPU3 hard status: success*** GL Error: E_OUTOFMEMORY (hr=0x8007000e): imageMaskTex ****** GL Error: imageMaskTex ****** Error: dng_exception (200025) in cr_gpu_tile_render_task ***TrimFoot

Hello, I have hundreds of headshots to edit in Photoshop. I really like the Camera Raw Remove Blemishes feature and want to make an Action out of it. The problem is that when create an action using “photo A” and then try to use the action on another photo “photo B”, the mask of blemishes are copied from Photo A and it just puts blemishes from Photo A onto Photo B. So, instead of the Remove Blemishes Action re-processing the Blemish filter, it just applies the processing that it created when I made the action. I love the actions and have made many for all kinds of purposes that help me move through my edits faster. I can’t seem to figure this one out.If you need clarification I can try and do that.Thanks,Will

In the latest version of Camera Raw, some keyboard shortcuts have changed. Previously, you could rotate an image simply by pressing L.Now, however, they’ve switched to the combinations Ctrl + ] and Ctrl + [.I can no longer rotate the image because, to type square brackets on my Italian keyboard layout, I have to press Alt + è or Alt + +. Alternatively, Ctrl + Alt + è or Ctrl + Alt + +. The rotation doesn’t respond to the command. What should I do? It seems it’s also impossible to change the Camera Raw shortcuts.  thanks

All day since I updated PS, Camera Raw (which last updated 7 days ago) is running probably the slowest I have ever experienced. It’s unmanageable. I tried dialing back to the version of PS that was working just fine yesterday (PS 27.10) and there was no improvement. Then I tried reverting ACR and the last available installer before 18.7 was 18.4 but then my images were jacked up because they have been edited on a newer version so I just re-updated everything. I am SO TIRED of constant issues. AI features are super cool and all but I really REALLY just want the normal stuff to work at speeds that don’t make galleries take 14 business months.Just to be clear and so no one thinks I am confused - it is CameraRaw that is lagging - I haven't even tried to use PhotoShop today but the only thing different since yesterday is the PS update to 27.11. CameraRaw is on version 18.7.MacBook Air - 15 inch, M3, 2024, 16GBRunning OS Golden Gate 27.0.1** I purged my cache, deleted the old GPU and Logs fo

When I crop an image and finish with it the new crop does not fill the screen. Its stays the same size and just removes all the pixels outside the crop. In previous versions when I would confirm the crop with the enter key it with bring the new images to fit in view. Its is frustrating that I have one more button to click now every time I crop and every time and slightly adjust the crop.Im using ACR 18.4 on a 2024 M4 Mac Mini

Please Bring Back the “Constrain Crop” Option in Adobe Camera RawPlease bring back the “Constrain Crop” option that was available in previous versions of Adobe Camera Raw.This feature automatically adjusted the crop boundary when an image was rotated, preventing empty or transparent areas from appearing around the edges. It was extremely useful for photographers who need to straighten and crop large numbers of images quickly.In the latest version, this option is no longer available, which makes the cropping workflow much slower and less convenient. Users now have to manually adjust the crop after every rotation, even though the previous feature handled this automatically with a single checkbox.Removing this option feels like a significant step backward, especially for professional photographers who process hundreds or thousands of images at a time. Please restore the original “Constrain Crop” checkbox, or provide an equivalent option that users can enable or disable depending on their

I took this picture yesterday afternoon.  I forgot to bring a polarizing filter and hoped ACR would help me but I am struggling to find any real value in the parameters I have used.  I really want the reflection of the car removed.. 

This post applies to Camera Raw and is the primary feedback thread for the Blemish Removal feature. Blemish Removal can be found in the Remove edit panel for Camera Raw. Blemish Removal helps automatically remove distracting skin blemishes, such as acne and other temporary imperfections, while allowing you to tune the appearance of permanent marks, such as freckles and moles. Once enabled, your image will be scanned for people, and any detected blemishes will be automatically removed. For refinement, you can adjust the result using the Amount and Fade sliders, choose which person the removal applies to, and restore any areas you'd prefer to keep. Batch removal is also supported; simply select the "Blemish" checkbox under "Remove" in the copy settings dialog. We would love to hear your feedback on Blemish Removal! Please give it a try and let us know what you think:How is it useful? How could it be more useful? What could we do to improve your experience? Josh Bury, Camera Raw Engineeri

Bonjour à toutes et à tous.  Lorsque je veux attribuer une notation ou bien une étiquette à mes images, un son d’erreur se fait entendre.  Aussi, CR18.7 me prescrit les raccourcis suivants (+ capture d’écran) : Note 1 étoile :  & Note 2 étoiles :  é Note 3 étoiles :  “ Note 4 étoiles :  ‘ Note 5 étoiles :  ( Etiquette rouge :  § Etiquette jaune :  è Etiquette vert :  ! Etiquette bleue :  ç   Aucun de ces raccourcis ne marche. De plus, lorsque je vais sur le site d’Adobe, les raccourcis prescrits sont les suivants :  Note 1 étoile :  1 Note 2 étoiles :  2 Note 3 étoiles :  3 Note 4 étoiles :  4 Note 5 étoiles :  5 Etiquette rouge :  6 Etiquette jaune :  7 Etiquette vert :  8 Etiquette bleue :  9 Pouvez-vous m’aider à résoudre ce problème ? Mon flux de travail est actuellement très réduit et je perds énormément de temps.  Je précise que lorsque je clique sur “Commande + 4”, cela attribue 1 étoile à ma photo. J’ai essayé toutes les autres touches du clavier, rien ne marche. Merci d’

Bonjour à toutes et à tous.  Lorsque je veux attribuer une notation ou bien une étiquette à mes images, un son d’erreur se fait entendre.  Aussi, CR18.7 me prescrit les raccourcis suivants (+ capture d’écran) : Note 1 étoile :  & Note 2 étoiles :  é Note 3 étoiles :  “ Note 4 étoiles :  ‘ Note 5 étoiles :  ( Etiquette rouge :  § Etiquette jaune :  è Etiquette vert :  ! Etiquette bleue :  ç   Aucun de ces raccourcis ne marche. De plus, lorsque je vais sur le site d’Adobe, les raccourcis prescrits sont les suivants :  Note 1 étoile :  1 Note 2 étoiles :  2 Note 3 étoiles :  3 Note 4 étoiles :  4 Note 5 étoiles :  5 Etiquette rouge :  6 Etiquette jaune :  7 Etiquette vert :  8 Etiquette bleue :  9 Pouvez-vous m’aider à résoudre ce problème ? Mon flux de travail est actuellement très réduit et je perds énormément de temps.  Je précise que lorsque je clique sur “Commande + 4”, cela attribue 1 étoile à ma photo. J’ai essayé toutes les autres touches du clavier, rien ne marche. Merci d’

The reflection removal tool works well until adding denoise filter to the image. the reflection returns to the image once denoise is finished. it does not matter in what order the two tools are added to the image, the reflection returns.

When opening RAW in ACR and using Crop (C) tool from left or right of the image it actually starts moving the GUI rather than cropping the image, not sure what version this has been changed, but before i never had this issue, please make GUI have lock option so when cropping images it would never try to resize GUII understand there is way to aim and select the right resize tool but margin for aim is so little and its waste of time, GUI should be set up once for most people don’t need to constantly be able to resize the side bars of ACR GUI

This post applies to Camera Raw. Lightroom Classic and Lightroom Ecosystem feedback can be found here. Previous Early Access Feedback can be found here.   Generative Remove makes it easier to remove unwanted objects and distractions with a simple gesture, even on complex backgrounds. For more accurate results, be sure to include the object's shadow in your selection and/or expand its size.    Detect Objects uses AI to find the objects underneath a brushed area. The masked areas will now appear larger than the Early Access version of this feature. You can also circle objects for quicker selection now.    We have also updated the spot selection experience to make it easier to manage variations, switch the fill type, refine the selection area, or re-generate as needed.    Batch updating is also now supported for Generative Remove spots. As Generative AI analyzes portions of the image that have been cropped out, Camera Raw has the ability to tog

Hello everyone, as a user of lovely fuji x100v I often use digital crop function that makes from 35mm a 50mm or 75mm lens.. this function crops the jpegs but in raw it is stored just as metadata.. my problem is that when these raw files are opened in bridge it doesnt read the crop info and shows it as full image.. also when converting via adobe dng converter from  raf to dng it doesnt detect the crop so my composition is off .. So I was hoping adobe could fix this because the metadata is there and I could have a cropped image already with option going back ( like a preset already applied) .. there is one unofficial plugin for ligtroom and one other manufacturer implemented this in his dng converter but it is apllying also demosaic or how is it called and the dng is 30% bigger in size so a no go for me.. My simple workflow is bridge + camera raw.. Also it would be cool if there was option to save a manually cropped edit as preset because camera raw ignores manual cro

I am the poster this threands. That is not the question!!! That is totally bug!! But the manager classify my threads as Question!SOOC of Lumix S9 with Vlog color profileRW2 of Lumix S9 was opened in ACR 18.6It can be clearly observed that the consistency of color is severely inaccurate!This condition is identical with Lumix S1M2SOOC of Lumix S1M2 with Vlog color profileRW2 of Lumix S1M2 was opened in ACR 18.6It can be clearly observed that the consistency of color is severely inaccurate and red is supersaturation.Besides the bug I reported above, there is another thing that Adobe needs to improve. I hope Adobe can introduce a layered and graded color grading workflow, similar to the color grading interface in DaVinci Resolve. Because in either ACR or LR, once a color profile is applied, you cannot apply another color profile on top of it. This also means that Panasonic RAW files in ACR cannot have V-Log applied and then have LUTs applied afterward.

 The updates for the versions I mentioned in the title don't work. Camera Raw keeps claiming my RTX 3070 GPU isn't supported. So, I can't use it. Only version 18.4.0.0 works.Here are screenshots of the messages I receive with the latest versions. And here with version 18.6.0.0Apart from Photoshop itself, which does support my GPU:Therefore, I cannot take advantage of the latest Camera RAW features. This is unacceptable.I already submitted a bug report for versions 18.4.1 to 18.5, but without success. You haven't fixed the problem in this version.Here are the logs for version 18.6.0.0As well as those of the version that works for comparison.I also upload my dxdiag file for analysis.I even got another NVIDIA GeForce Studio driver update today, version 616.56. But it didn't fix the Camera RAW issue. So I'm still stuck on the working version 18.4. It's really frustrating 😤 knowing that I'm paying for the software.

I am seeing a significant performance regression with AI Denoise in Camera Raw 18.7 on a 2023 Mac Studio with an Apple M2 Ultra.SystemMac Studio (2023) Apple M2 Ultra, 24-core CPU 128 GB unified memory macOS 27.0.1 Camera Raw 18.7 Photoshop 2026 Sony A1 II RAW files, approximately 49.8 MP (8640 × 5760)ProblemAI Denoise on comparable Sony A1 II RAW files previously completed in under 10 seconds on this same Mac. It now typically takes approximately 15–20 seconds.I reproduced the problem by opening a Sony A1 II ARW directly in Photoshop/Camera Raw, so Lightroom Classic, its catalog, previews, and the location of the Lightroom photo library are not involved.During a recent Camera Raw Denoise test, Camera Raw estimated approximately 20 seconds. While Denoise was running, Activity Monitor showed the Mac remaining approximately 86–94% CPU idle. GPU History also showed relatively low GPU activity rather than sustained heavy utilization.Camera Raw Preferences > Performance identifies the Ap

Pressing G used to add a linear gradient mask. Now it brings up the new Grid layout. J used to apply the radial mask. Now it does nothing. What’s going on with the KBSCs? I’m not sure if there are others that have changed. The brush took, still works with K.