Questions

merhaba son güncellemeyi yaptım arayüzler değişti özne seç çalışmıyor kişileri bulmuyor. 

I had Montserrat font installed and have been using it for a while. I installed Montserrat Alternatives recently. Now the original Montserrat font does not work in Photoshop. I have deleted both fonts from all locations… computer and cloud. Have reinstalled Montserrat, it shows up, but it acts like the alternative version.I have also deleted all my cache and temp files. This only happens in PS Beta. The font works in Word and CorelDraw.

Hello,   I’m experiencing a recurring bug in the latest version of Photoshop (Beta) on macOS.   When I add a Hue/Saturation adjustment layer, the Properties panel does not display the usual Hue, Saturation, and Lightness sliders. Instead, it only shows: “No mask selected” — even though the white thumbnail (the adjustment layer, not the mask) is properly selected in the Layers panel.   This bug does not happen in the stable version of Photoshop, nor in a different open document within the same session. Steps to reproduce: 1. Open or create a new document 2. Add a Hue/Saturation adjustment layer 3. Click the white thumbnail of the adjustment (not the mask) 4. The Properties panel incorrectly shows only mask options (“No mask selected”) System details: • Photoshop Beta version: 26.6.0 • macOS version: 15.3.2 • Chip: Apple M3 Pro

Hi All,I've tried dozens of ways to add new eyes to a male ballet dancer's face with generative fill and no matter what I try a message pops up telling me I am violating the guidelines. I'm at my wits end. I'll list what I've tried below and upload some images.  Does anybody have a 'workaround' or solution I haven't already tried? I'd really appreciate any input! Thanks so much!          Things I've Attempted to Stop Generative Fill from blocking Results:Updating Photoshop BetaCleaning all temporary files and cookies from my drive and restaring both my laptop and PSBetaMaking my selection area smallerPutting a period in the prompt boxBlacking out/covering almost all the bare skin in the image before using Gen FillUsing several prompt wordings: 'The eyes of the man' 'The eyes of the model' 'The model's eyes and eyebrows' Etc.Using 3 different reference imagesUsing no reference imageUsing a reference image and no promptUsing a prompt and no referen

Hi, I'm using PS Beta 26.6, and when I try using the "Parametric Filter" the only things that happens is that it:-Duplicates the layer-Converts to smart object. The parametric properties stays "blank" with the text: "Select a layer that contains a Parametric filter....". I've tried to reinstall the Beta, and I've tried resetting the preferances. What am I doing wrong?

Hi(and happy new year!) I can't find the Photoshop (beta) in my Creative Cloud Desktop.Under "Categories" I can see it all (... Video, Illustration, UI & UX, 3D & AR and Acrobat & PDF) but no Beta-category.... please see attached.Is this because I'm living in Denmark? Or do I need to sign up to the beta first?Kind regards, Jens    

Photoshop (Beta) 27.6 won't update. It generally stalls or fails at 40 or 41% complete. I have plenty of space on my C:\ Drive. I’m using Windows 10.I’ve tried rebooting and retrying 27.6 update. Fail.I’ve deleted the adobeTemp folder and retried installing update to no avail.I’ve uninstalled the 27.5 Beta and failed at reinstalling the 27.5 package.I reinstalled 27.4 Beta with success and updated 27.5 with success.Beta 27.6 update still stops at 41%.The error I keep getting is this._________________________________________________Exit Code: 127-------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 19 error(s), 17 warnings(s) FATAL: Error occurred in extract of package (Name: AdobePhotoshop27-Core_x64 Version: 27.6.0.3475). Error code: '127' ERROR: Path:C:\adobeTemp already existsERROR: Failed to allocate buffer for file C:\adobeTemp\ETR7B37.tmp\1\Application\Photoshop.spd of size 665063036ERROR: Failed memory allocation after sleep al

Hello, I am having an issue with generative credits in photoshop beta. It says I have 250 credits remaining for my Photography Plan, but after trying the rotate feature in beta for 3 free times, I keep getting a pop-up stating I need to get credits. May I get support on this?

Hello, I am having an issue with generative credits in photoshop beta. It says I have 250 credits remaining for my Photography Plan, but after trying the rotate feature in beta for 3 free times, I keep getting a pop-up stating I need to get credits. May I get support on this? (Copy from other forum as I got redirected).

Hi Photoshop beta friends!   We have just added a new feature for the Move tool called "Hover layer bounds" to the Photoshop beta, and it is available to you now!   What does it do? This new feature adds the ability to mouse over an object on your canvas and show an outline of that layer. Additionally the corresponding layer will be highlighted in the layers panel. It also has additional function with layers with masks that display both the shown and hidden pixel data.   Hover layer bounds also works in the reverse direction as you mouse over layers in the Layers panel.   Hover layer bounds is very customizable; You can customize the color, thickness, and the Layers panel highlight color in Preferences > Guides, Grid & Slices and customize the behavior in the new Move tool gear menu in the Options bar.   We would love for you to give hover layer bounds a try! Please let us know what you think and how we could make improvements to this f

Cuando intento reducir el ruido, no manualmente sino por AI, el sistema me da un mensaje de error y se bloquea el programa.Esto me sucede tanto en Photoshop ACR como en Lightroom.He actializado la BIOS de mi ordenador, así como también verificado  que tengo actualizada la última versión de mi tarjeta gráfica Nvidia Geforce GT 1030 y a pesar de ello, el problema persiste.Qué puedo hacer al respecto? La única solución posible es cambiar la tarjeta gráfica?Gracias por anticipado.Cordiales saludos Gerardo 

ACR Lag Issues.ACR (Beta) and 18.3.0.2528Mac Studio M1. 128GB RAM. Tahoe 26.4.1When loading images from Bridge into PS (Beta) to straighten uprights the guides are slow and laggy. Masks do not show coloured overlay and the whole thing is laggy.This appears to have started from the last update.If the images are opened into PS (Beta) and then opened in filter / acr there is an improvement thou when using the sharpening mask the mask isn't shown when the ‘option’ key is held.Regards,Mark

I would like to share feedback about the installation behavior of Photoshop Beta on macOS.I install Photoshop Beta for one reason: to test new and experimental features. I do not install it as a replacement for the stable release of Photoshop. However, after installing or updating Photoshop Beta, it appears to take over file associations that were previously assigned to the regular Photoshop application. As a result, image files that I intentionally configured to open with Photoshop suddenly start opening with Photoshop Beta instead.This is frustrating for several reasons.First, Photoshop Beta is, by definition, a testing environment. I want to try new features there selectively, not have it become my primary production app for day-to-day work. The stable version and the beta version serve different purposes, and Adobe should respect that distinction.Second, on macOS there is no simple central screen where users can restore all file-type associations at once. Reverting this behavior me

Hello, the 3D rotation tool isn’t working, I select the subject, click on rotate the object, and this message appears. What’s the problem? Thank you  

Hi everyone 👋I’m new here and I’m having an issue with Camera Raw that I can’t seem to fix.I keep getting this error message:“Could not update all AI settings.”The strange thing is that this only happens with one specific preset, not with all of them. My PC is high-performance and fully optimized for heavy editing work, so it doesn’t seem to be a hardware limitation.Has anyone experienced something similar?Do you know what could be causing this or how to fix it?I’d really appreciate any help. Thanks in advance 🙏

Just like described in the subject, worked perfectly until I updated today and now the GPU fails.

I just installed the latest Photoshop Beta (27.0), the notes for which say that the Nano Banana image model is included. But when I attempt to use Generative Fill, the only models available in the dropdown are Firefly models 1 & 3 - no Nano Banana. 

自動に背景削除をクリックすると　実施のバナーがしばらく考えてからこのメッセージがもちろんレイヤーになっています（ロックもはずしています）　こんな単純な背景私のフォトショップでは簡単にできるのですが、新規に契約した新しくインストールした人のパソコンではできないのです。。どうしたらできるようになるのでしょうか？？

想问一下那个自由打光功能什么时候上线呢？可以添加多个灯光吗？就像MAX大会上演示的那样，什么时候推出呢？

LOVE LOVE LOVE the new Gen fill dialog box (Apr 7 beta).But the escape key is still disabled to cancel out of it. Is this intentional? I assumed it was a bug and was a quick fix.

Trying to select subject (on device or cloud) or remove background fails to select the letter I (4th letter) in APRIL.  I had to resort to using select  color range to remove the background so I could add it to another photo to create a monthly calendar wallpaper.generated calendar I wanted to edit to overlay onto a photo to make month calendar wallpaper 

I can not pull up any general distractions?

EDIT: Problem is solved. I’ve never encountered this before. For some reason, I needed to disable all of my monitors, except one, launch PS Beta, and then it worked (even when the other monitors were renabled). No idea why this was happening and why it didn’t affect regular PS (with the same HDR box checked) nor other programs with HDR support.  I don’t know how to close this report.________________________________Hello, I just updated Photoshop Beta to 27.5.0 (260305.m.3446). I have been using Photoshop on an HDR display for at least two years. OS is Windows 11 with HDR turned on for this display.“Precise color management for HDR display is checked.” ALL images now appear very dark on the screen. I have tested more than 30 photos. Most are NOT HDR photos. This includes JPG’s, tiff, PSD and both 8-but and 16-bit images. The same images look normal in non-Beta Photoshop. They also look normal if I move the photoshop window from an HDR to a non-HDR display.If i disable the “Precise color

Adobe Photoshop Version: 27.5.0 20260316.m.3464 eb0251b  x64 (beta, PublicBeta)Operating System: Windows 10 64-bitVersion: 10 10.0.19045.6466Hello,I am experiencing a bug when using the Spot Healing Brush, Remove Tool, and Healing Brush in Adobe Photoshop.The tools behave unpredictably and produce anomalies that are difficult to describe. They do not follow the cursor movement. Instead, they start from a completely different location and perform actions that do not match my input.Steps to reproduce:Select any of the mentioned tools (Spot Healing Brush, Remove Tool, Healing Brush)Start brushing over an areaObserve that the stroke does not follow the cursor and jumps to another locationExpected result:The tool should follow the cursor precisely and apply corrections where I paint.Actual result:The tool starts from a different location and applies unexpected, incorrect movements.one click does this here is a video file that shows the behavior of the bughttps://photos.app.goo.gl/PAWhb7fsrf

I hate that the "contextual taskbar" icon is constantly interfering with my work...it's blocking me in the middle, to the right, to the left, on top of objects, everywhere...it's really ridiculous.