Lightroom Classic

Buonasera, desidero segnalare un problema relativo alla visualizzazione dei file RAW (.CR2/.CR3) generati da fotocamere Canon. In condizioni normali, i file RAW dovrebbero presentarsi “grezzi”, quindi con colori meno saturi e con le distorsioni/aberrazioni dell’obiettivo ancora presenti, pronte per essere corrette in fase di post-produzione. Tuttavia, ho riscontrato un comportamento anomalo con l'inseriemnto dei file RAW in Adobe:Quando apro un file RAW con Anteprima, l’immagine inizialmente appare identica al JPG associato.Una volta espansa la visualizzazione della stessa foto, però, l’anteprima cambia e mostra una versione diversa: più scura e con distorsioni visibili, quindi più coerente con un vero file RAW - come dovrebbe essere. Il problema si presenta anche quando importo il file RAW in Adobe Lightroom, Lightroom Classic e Photoshop: il software riconosce correttamente il formato RAW, ma utilizza l’anteprima errata, restituendo un’immagine praticamente identica al

I am experiencing two issues in Lightroom Classic:1. Multi-photo rotation in Print module:- Cannot rotate multiple selected images at once.- Must leave Print module and rotate in Library or Develop.- Disrupts workflow and increases error risk.2. Blank prints with DNP DS820A:- Some photos print completely blank, even though previews are correct.- Paper, ribbon, and printer connections are correct.- Occurs only when printing from Lightroom.System Details:- Lightroom Classic 13.0- Windows 11 Pro, 64-bit- Printer: DNP DS820A- Time Zone: AST (UTC -4)I request Adobe to consider adding multi-photo rotation in Print module and provide a fix for blank printing issues.

I have the same problem but on all my photos.It becomes impossible for me to filter only modified photos.Any suggestion?

Im working on a final project for college, so fast replys would be appreciated if able Im having an issue with lightroom very slightly cropping my images, and I have been unable to find a way to restore the full resolution. Ive attached some screenshots showing the raw files in explorer, the import settings, and the files in library with the changed dimentions. Ive already looked at a lot of guides having simmilar but not the exact same issue, and no fixes ive tried have worked. I tried just resetting the crop in the develop module but it doesnt show any crop to reset, Ive tried a very old plugin to restore edges and that didnt work either. I dont think its a camera setting as the actual raw file has the expected resolution, its just lightroom thats cutting it down. I also have made sure there is no lens correction being applied either.  Im at a loss here, any help is appreciated

Bonjour, Problèmes avec lightroom classic. Module Dévloppement, exportation; J'utlise cette appication sans problèmes depuis des années. J'importe des photos , d'un dossier sur mon Pc. Dans le module Bibliothèque, je documente ma photo, Mots clé,  Titre, légende, Créateur, Copyright, etc, du classique que je fais depuis longtemps.Je passe au module Développement. Je ne fais aucune retouche, j'envoie de suite sur exportation.La photo est exportée dans le dossier dédié, tout va bien. A l'ouverture des Propriétés/ Détails, c'est là que tout va mal, désespérement vide. Aucun des paramètres écrits dans le module Bibliothèque ne figure dans les propriétés. Trois jours je suis là-dessus à ne rien comprendre.Je me suis énervé, j'ai viré lightroom, contrôlé mon Pc viralement, puis réinstallé Lighroom et surprise même problème. L' erreur que j'ai peut être commise c'est d'avoir gardé mes paramètres personnels. Merci, si un de vous à une idée, cela dépasse mes capacités techniques.

The Supported Cameras page says that the Canon EOS R6 Mark III doesn't have camera-matching profiles:  But if you download sample raws for that camera from here, they have camera-matching profiles available, e.g.   

For no obvious reason - to me - suddenly LrC does not recognise people anymore... Even when I use a photo  with 1 person full figure I get the message "no people found".  All other options work perfectly. 

Hello! So I have been working on a folder of photos for a while and I went back on to my computer today and now im only seeing 6 imported folders when there should be 20-30. I have not changed the names of any folders that would cause them to not be found. I have not moved the location of them either. I store all my photos on a hard drive. I have no idea why its not showing all my imported photos. Any ideas would be appriciated since I really do not want to start all over. Thanks!

My film strip and grid view scroll the opposite way they normally do

I have object selection and dust removal working fine on my Windows 11 laptop, but they both fail on my desktop. I have updated the video driver but it is still failing. For dust removal I click the Apply checkbox, it briefly checks, then unchecks again immediately without doing anything. Below is my system info. Thanks.  Lightroom Classic version: 15.0.1 [ 202511041508-dddee541 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 8Processor speed: 3.0GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.171 CPU Utilisation: 3.0%Power Source: Plugged InBuilt-in memory: 32606.2 MBDedicated GPU memory used by Lightroom: 605.2MB / 4052.5MB (14%)Real memory available to Lightroom: 32606.2 MBReal memory used by Lightroom: 5157.1 MB (15.8%)Virtual memory used by Lightroom: 6495.0 MBGDI objects count: 752USER objects count: 2449Process handles coun

App version: Lightroom Classic (latest version at the time of writing)Platform: Windows 11 64 bitHardware: RTX 4060, Ryzen 9 7900, 64 GB RAM, NVMe M.2 SSDDescription of the problem:I am experiencing severe performance issues in Lightroom Classic when working with large photo imports.First issue: AI Denoise does not work during import.When I select an import preset with AI Denoise enabled, the denoise is not applied. After the import finishes, I have to manually run AI Denoise on each photo.Second issue: photos are not processed until they are visible on screen.After import, images are not fully processed in the background. Lightroom only processes photos that are currently visible in Grid view. For example, when importing around 10000 photos, only about 300 visible images get processed. I have to scroll through the grid to trigger processing of the remaining photos.Third issue: previews and metadata sync do not help.I tested Standard previews, 1 to 1 previews, Smart Previews, and metad

BonjourJe n'ai plus accès au débruitage (fonction détails) sur LightroomQuelqu'un a t'il une solution?Un grand merci

How do I delete old programs from "Edit In" ?

Hi after the import of my latest photos, Lightroom Classic every time restarts the screen with import (where you select the source and the photos that you want to import). I tried already to restart my pc, I deinstalled Lightroom classic (twice). I have the Lightroom Classic 15.0.1 with windows 11 (latest updates have been done). I have more than enough space, so no crash there. Does anyone has an idea?  

LrC is not importing .arw photosIt was able to import photos beforehowever when attempting to import my photos, I'm prompted with:"The following files were not imported because they could not be read or the destination folder is unwritable (1602)"The same photos from the same sd card were able to be imported to Lightroom

Summary:After upgrading from Lightroom Classic 14.5.1 to 15.0.1, the GPU engine no longer initialises. Masking becomes extremely slow or unusable. System Info consistently shows: Build: UninitializedGPUDeviceEnabled: falseDirect2DEnabled: false  Rolling back to 14.5.1 restores basic masking, but GPU acceleration still does not activate in that version either.Environment:Windows 11 ProNVIDIA GeForce RTX 5060 Ti (Studio Driver 591.44, Standard)AMD Radeon firmware-level GPU on Ryzen 7 9700XDual-monitor setupDxDiag: all DirectX features OKPhotoshop detects and uses GPU normallySteps to Reproduce:Install Lightroom Classic 15.0.1Launch LightroomOpen System Info → GPU sectionGPU engine is not initialised; masking becomes extremely slowExpected:GPU engine should initialise; masking should use GPU acceleration.Actual:GPU engine does not initialise; Lightroom reports “Build: Uninitialized” and disables GPU processing.Notes:Clean NVIDIA install performed with DDULightroom preferences re

This issue has been active since December 4 and remains unresolved despite extensive Adobe Support involvement up to Tier 3.Adobe Support Case NumberADB-42913017-K1J8Summary:Lightroom Classic is unable to reliably sync collections and albums to Lightroom Web, even after images and albums are deleted from the cloud. This suggests that Adobe’s cloud backend retains internal asset IDs tied to previous uploads, resulting in a persistent desynchronization (“ghost” state).Observed behavior:- Collections partially sync or fail to populate- Images appear in All Photos but not in their assigned albums- Previously uploaded images behave as if they still exist after deletion- Sync issues persist across multiple catalogs, indicating a cloud-side issue rather than local catalog corruptionImportant clarification:This is not resolved by emptying Lightroom Web. The issue persists across catalogs and after extensive cleanup.Impact:Professional workflow is blocked. Tier-3 troubleshooting led to fragment

I almost thought I was going to have to force restart computer or it was going to crash on its own, but it recovered and only gave a white screen with the lightroom boarders, when I clicked to change to library out of developer tab to see if it was going to continue or fix itself, it showed this message at the top and removed all the color grade.  When I restarted it, the color grade was there and fine, it's just being overly laggy when it shouldn't be. Before this, it started randomly being EXTREMELY laggy like it was not processing correctly.  Very similar to how if you use the brush tool in the masking, Lightroom normally is not coded to process those very well and lags a LOT........even after all the updates saying the masking processing was improved....it really wasn't, maybe by a small margin, but today I was not using any brushes in the masks.  I was using just the normal masks and grading I do for the majority and was not doing touch ups yet which is when the known lag starts. 

I have a recurent issue in LRC now and it worries me a lot since I don't find anything about that on here.The masking tools are not working properly for some times now. Or I am just not able to create them meaning that when I click for instance on linear mask nothing happens (nothing happens no matter the mask I choose). Or , when I manage to create them, they disappears as soon as I update the ai assisted tools...which is required.I really don't know what to do and I would love to see an update for LRC to fix this because this is not usable for my work and when you have a full wedding to edit and deliver, this can be verry frustrating.

I have a collection with several folders of images I want to include in my Book. I successfully have built multiple pages  already in the saved book called "Our Family 2025" which is also saved in the Collections.  However, all of a sudden, I can no longer access my other collections folders I havent used yet from my saved book. For example, I want to use images from folder "8 Aug Raro", but as soon as I click on that folder, the saved book disappears, eventhough I am in the Book Module and a blank new book opens. The images showing in the preview at the bottom are only the images I have already used in my book - and i have the Filters Off toggled. How can I access teh other folders to include in my saved Book?

 Issue Description:Lightroom Classic has become extremely slow when switching into the Book Module. Whenever I switch from Library or Develop back into Book, Lightroom displays “Collecting Information…” in the upper-left corner and then hangs for a long time before the Book Module becomes usable. This behavior makes the Book Module almost unusable for book projects and did not occur before recent versions.What I Have Already Tried:Updated Lightroom Classic to 15.0.1Quit + restarted Lightroom and macOSOptimized catalogPaused cloud syncVerified there are no active sync operationsIssue persists regardless of whether the Book module was edited recentlyOther Details:Catalog size: 1.24 GBTotal photos: 99,136Sync status: Sync is pausedStorage locations:~75,000 photos stored on an external hard drive~24,000 photos stored on the internal MacBook SSDCatalog and previews are stored on the MacBook internal driveProduct: Lightroom Classic v15.0.1Operating System: macOS Sequoia 15.6.1Hardw

Before updating to LRC 15 last week I routinely blitzed through bulk HDR merges of dozens of images in just a few minutes, as well as other dng processing/import from DXO Pure Raw, and now these tasks are taking an exorbitant amount of time to complete. This is destryong my work flow at a critical time for my clients. Any help is greatly appreciated... thanks!   System info here: Lightroom Classic version: 15.0.1 [ 202511041508-dddee541 ]License: Creative CloudLanguage setting: en-USOperating system: Mac OS 15Version: 15.6.1 [24G90]Application architecture: arm64Logical processor count: 14Processor speed: NASqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.171 Power Source: Plugged In, 100%Built-in memory: 36,864.0 MBDedicated GPU memory used by Lightroom: 2,498.5MB / 27,648.0MB (9%)Real memory available to Lightroom: 36,864.0 MBReal memory used by Lightroom: 6,523.8 MB (17.6%)Virtual memory used by Lightroom: 428,469.5 MBMemory cache size: 3,749.5MBInternal Camera Raw version: 18.0

Bonjour à tous,Je me permets de vous solliciter car je travaille actuellement sur de la retouche automobile sur Lightroom et j’ai remarqué un problème assez gênant.Comme vous pouvez le constater sur les photos ci-jointes, lorsque je modifie l’angle de l’image, la qualité se dégrade : la grille à l’avant de la voiture devient moins nette et des sortes de hachures apparaissent.Auriez-vous une idée de l’origine de ce problème et de la manière de le corriger ?Je suis sur la derniere version de Lightroom Classic 15.0Windows 11 Famille 23H2

bonjour à tousmon curseur reflets est bloqué sur 100, et du coup j'ai toujours les reflets malgré le travail de IAMerci pour votre aide

Ho acquistato una nuova stampante Epson ET-8550 e sto selezionando le immagini che vorrei stampare e che inserisco in una raccolta dinamica. Tuttavia per conoscere le dimensioni della stampa finale in cm devo aprirle una per una in Photoshop e controllare la dimensione immagine cambiando da pixel a cm. Se sono molte diventa noioso e richede molto tempo. Nelle opzioni vista della Libreria di Lightroom ho attivato una etichetta con "Dimensioni ritagliate" che mostra i pixlel dell'immagine corrispondenti a quelli di Photoshop. Purtroppo non trovo il modo di scegliere cm invece di pixel. Ho anche parlato con i consulenti di Adobe, ma non hanno trovato una soluzione. Mi hanno consigliato di creare un post nella speranza di una soluzione se non immediata magari in un prossimo aggiornamento.