Lightroom Classic

Hallo, ich brauche bitte eire Hilfe. Auf meinem MacBook von 2024 funktioniert LRC nach dem 14.4 Update nicht mehr. Der Katalog öffnet zwar, aber es beginnt sofort zu kreiseln. was kann ich machen?

 HiI'm a full time photographer working with lightroom for the past 18yrs.Since recently, I guess after the last update, lightroom became unworkably slow.It's slow when going to the next photo in the develop module. Sometimes I have to wait +7 seconds before I can even see the next photo. I optimized my catalog.I have enough diskspaceHere are my system settings:Lightroom Classic version: 14.4 [ 202506051112-5918896a ] License: Creative Cloud Language setting: en-GB Operating system: Mac OS 15 Version: 15.3.2 [24D81] Application architecture: arm64 Logical processor count: 10 Processor speed: NA SqLite Version: 3.36.0 Power Source: Plugged In, 81% Built-in memory: 32.768,0 MB Dedicated GPU memory used by Lightroom: 9.616,8MB / 21.845,3MB (44%) Real memory available to Lightroom: 32.768,0 MB Real memory used by Lightroom: 1.918,7 MB (5,8%) Virtual memory used by Lightroom: 439.590,7 MB Memory cache size: 1.137,0MB Internal Camera Raw version: 17.4 [ 2272 ] Maximum thread count

My catalog will not backup when I close out of Lightroom Classic. Below is te catalog settings and I have never seen the backup path as being marked *offline before.I originally had an alert at the bottom of the window stating that my backup path was on the same volume as my catalog. When I Googled and looked at some troubleshooting, all the solutions were telling me to direct my catalog backups to a different location storage location from where my actual catalog was being stored (e.g. instead of storing the backups on my C: Drive, I moved the location to my 😧 Drive). I do not get any sort of dialogue box that pops up when I close LRC, so I can't tick any boxes with regards to optimizing the catalog or testing the integrity of the catalog. I am using Version 14.2 on Windows 11. 

I'm trying to set up a simple dialog with an edit field the value of which persists using the code below, called using  LrPluginInfoProvider in my info file. What am I doing wrong?local LrView = import "LrView" local LrPrefs = import "LrPrefs" local LrDialogs = import "LrDialogs" local bind = LrView.bind local pluginInfoProvider = {} function pluginInfoProvider.sectionsForTopOfDialog(f, properties ) local prefs = LrPrefs.prefsForPlugin( ) if properties.userName == nil then properties.userName = prefs.userName or "yyyy" end return { { title = "Chatter Preferences --", synopsis = "Chatter, by Kim Aldis", f:row { f:column { spacing = f:control_spacing(), f:static_text { title = "Testing:" }, f:edit_field { value = bind "userName", width = 300 } } } } } end return pluginInfoProvider

I have the Photo Subscription for LRC and Photoshop.  How many uses per month do I get to use the REMOVE TOOL FROM FIREFLY with the AI box checked.  I heard the Adobe sent out a letter/email explaining all this but neither Adobe support or my email shows that I ever got it.  Did anyone out ther get it???

I understand that Lightroom Classic runs through an Intel emulator on Microsoft Surface 7 laptops since they use an ARM processor.  Apparantly Lightroom hasn't been updated to use ARM. However Photoshop can use the ARM processor.  But now, when I make initial edits in Lightroom and want to jump to Photoshop from there it doesn't directly connect. Is there some way to have Lightroom "find" Photoshop that I'm not aware of?

My raw files are stored in folders by date taken: eg. 2025_7_24.  After processing in Lightroom I've exported them back to the same directory with a slight name change.  Lightroom still has instructions to 'export into same folder as original photo.  Recently Lightroom has started exporting to a new folder: eg 2025-7-24....using hyphens instead of underscores.  I'm at a loss how to g

Desde ontem venho me deparando com um problema, não está sendo possível usar máscaras na edição, aparece um ponto vermelho e uma advertência dizendo que "algumas máscaras de IA precisam ser atualizadas". Mesmo fazendo a atualização (há um botão para isso na msg) o erro volta a aparecer depois de alguns instantes.

Hello, I purchased Adobe Lightroom 6 many years ego and I have a valid serial number. I'm now trying to reinstall it on a new windows 11 computer from the original CD, but the installation keeps asking for an Adobe account login, even though I am not using Creative Cloud.I just want to activate the perpetuall license I paid for.Please help me unlock the software. I believe this is not fair for a product I legally purchased.Thank youAlessandro 

App & Plattform: Adobe LR Classic Version 14.3.1 auf einem PC mit Windows 11 Pro Version 23H2.Problem: Lupenansicht zeigt falsches Aufnahmedatum an, EXIF-Datum ist leerReproduktion des Problem: Bilder im Bibliotheksfilter nach Datum filtern und gefundenes (korrektes) Datum mit dem angezeigten Aufnahmedatum aus der Lupenansicht vergleichen. Hallo,ich benutze seit vielen Jahren LR Classic, meine LR-Datenbank hat schon einige Rechnerumzüge erlebt.Bei älteren Fotos habe ich jetzt folgendes Problem:- Der Bibliotheksfilter findet z.B. ein Bild im August 2001, was korrekt ist.- Die Lupenansicht zeigt als Aufnahmedatum März 2024 an.- Die EXIF-Daten für "Urspr. Datum/Uhrz.", "Datum/Uhrz. digital" und "Datum/Uhrzeit" sind alle leer.- IPTC zeigt auch kein Datum an Weitere Einstellungen:Für die Metadaten in den Katalogeinstellungen habe ich den Haken gesetzt bei  "Bearbeitung" - "Änderungen automatisch in XMP speichern"  "EXIF" - "Datums- oder Zeitänderungen in proprietäre

My normal workflow is to open images in lightroom, and then if I want to make changes, right click and select edit in photoshop. I have now downloaded photoshop beta but I can't find a similar way to send images from lightroom to PS beta. right clicking dosen't give it as an option and if I go to preferences (as suggested) it can't seem to find the PS beta app as an alternative. I am just looking for a simple way of sending images from lightroom to PS beta - and ideally be given the option of what version of PS i want the image to go to

I use the Denoise slider. I see the noise in my picture being updated between 0 - 100% (as it should) But a double click on the slider reverts it to 50% (as it should), but the noise level on the screen is not updated according the 50%.    This is best visible when you double click on the slider when it is a 0%. After this every thing works normal, when I move the slider with my mouse. The same might happen at differnent values, but not tested (and less visible). LR 14.4 on MacOs 15.6    

As in the title, I am importing say 5000 RAW files from a hard drive (done a million times) and am only seeing say 4500 images imported but there is clearly 5000 chosen to import. Moving over to another computer - the import works from the same drive just fine.Any ideas whats happening on one comp?many thanks

I'm on mac and I'm experiencing a weird green tint to my images when working with the merge-to-hdr function. I haven't changed anything in my screen's profile, or anything else, besides updating to latest build of the OS( Sequoia). See attached screenshots. After looking at another post with a simliar issue, I did check the histogram, which does seem to be oddly green in the highlights. Any ideas why this is suddenly happening? 

Hi.   I am using LrC V14.0.1 on a mac, and it seems like I cannot revert an image back to the original. Even after resetting the image, there is still a big difference between the before and after.     The above screenshot was taken after I reset the image. Is there any way that I can get the original back, because I prefer that edit over the non-edited 'after' image.   Thanks!

after I edited images with photoshop from literoom classic, it's save to lite room classic for a couple of hours or a day, but next day when I reopen literoom classic, all the photos that I edited with photoshop are gone, literoom shows as error.  file could not be found.  what should I do? 

I imported 45 raw files this morning, went through a dozen or so the sme as I have with thousands before in the past 10 years - now, for no apparent reason the Edit In menu under Photo is entirely greyed out...I see this was asked in 2016 and the answer had to do with smart previews, but again, this same batch of files (which were converted to dngs by DxO PureRAW, also part of my normal workflow) was working fine until an hour ago. I have restarted the MacBook as well as quit and restarted LRC, to no avail. MacBook Pro M3 on Sequoia 15.5LRC v 14.4 Thanks for any insights 

Hello, I'm new to this community and I'm hoping someone can help me. I purchased Lightroom 3.2 over 10 years ago and had it on my old computer. During that time, apparently Adobe updated it to 5.3, then 5.6, and finally 5.7.1. I installed the original 3.2 on my new computer and I'd like to get it updated just as the old computer was. I fired up the old computer and found the installation files for 5.3, 5.6, and 5.7.1 that had been downloaded from Adobe but when I installed 5.7.1 it asks for a serial number. I used my 3.2 number but it didn't work. Does anybody know how I can get it to work, like it did on my old computer? I still have the old computer if I need to search for a particular file that needs to be copied to the new one. Thanks for any help you can give me. I know I'll eventually have to go the subscription route but I'd rather not just yet.

All the since the previous LRC update I have noticed my LRC generally misbehaving.  Its slowed down, lags, and generally mishbehaving.  I have tried adding my catalog and previews to a flash external drive, I have tried rebuilding the catalog, I have tried different configurations for the graphics card etc.  But its getting pretty old now not having a consitent software tool.  I need to count on the speed and efficieny of LRC.  For example I will select an image with edits and paste the previous version edits to the selected photo and the button depresses but nothing happens.  Its like the system ignores the selection.  I  will repress the button and then it works after a lag.  This phantom issue is not consistent and can be with several LRC features.  The catalog scrolls smoothly but the edits and various features are laggy or require a second selection.  I have stopped sync and tried lots of different trouble shooting ideas.&nbsp

Can someone recommend professional help to find my LR catalog files.  I had to reinstall windows and LR and now I can't find my current catalog.  And yes, I've done a search on *.lrcat.  

Once I had a photo where it created a halo/ghosting effect to the side of a person giving her a second transparent outline, at first I thought I had a copy of a smart mask not recalculated, but I checked, no masks in this photo. It was even visible in the small preview.I have it turning a black jeans into a blue jeans. Anyone else noticed some funny stuff with Adaptive Profiles? 

Running Lightroom Classic Ver. 14.4.Nikon D7500Windows 11 Home Ver. 24H2Windows, Lightroom, and the Display Drivers are all the latest versions.When I use the Denoise feature, the image comes out completely messed up. Editing this photo in raw:Denoise feature gave this result:I tried a number of photos, and also got the same result on an old photo that successfully denoised with a older version of LrC.My workflow is Import>Develop>Denoise. I get no error messages. The denoise result looks the same in LrC as it does after I export the image as well.I saw some previous posts that said lightroom didn't like dual GPUs, so I also tried disabling UHD Graphics 630. that did not help. And I reset my preferences. That did not help. Any thoughts on a fix?Thank you in advance.Graham. Here is my system info:Lightroom Classic version: 14.4 [ 202506051112-5918896a ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Home Premium EditionVersio

Hola. Estaba editando un trabajo de 300 fotos, cerre Lightroom y cuando lo volvi a abrir todos los ajustes que habia realizado no estan mas (si las voy viendo van desapareciendo los ajustes realizados) Solo de esa ultima importacion y no toque ni cambie preferencias ni nada.Agradezco si alguien me puede ayudar a ver esos ajustes.Saludos

DescriptionFaulting Application Path: C:\Program Files\Adobe\Adobe Lightroom Classic\Lightroom.exeProblem signatureProblem Event Name: BEX64Application Name: Lightroom.exeApplication Version: 14.4.0.8Application Timestamp: 68415920Fault Module Name: video_toolkit.dll_unloadedFault Module Version: 14.4.0.0Fault Module Timestamp: 6841579bException Offset: 00000000002ecdddException Code: c0000005Exception Data: 0000000000000008OS Version: 10.0.26100.2.0.0.256.48Locale ID: 2057Additional Information 1: 76a1Additional Information 2: 76a173c26a6dc2e3cd83ac8fd9f8bdb9Additional Information 3: 7b3fAdditional Information 4: 7b3f634c955ac91fe3f1e745337a968aExtra information about the problemBucket ID: 95cfb192acb60cc6c2df5e8c4654c091 (1359909569057570961) Is there anything I can do about this? Bob Frost