Photoshop

Im Anfang lies sich Photoshop nicht mehr öffnen. Nach den letzten Updates (Windows und Photoshop) lässt sich Photoshop öffnen, meldet aber beim Öffnen von Bilddateien einen Programmfehler.Da keine genaue Fehlermeldung existiert kann ich auch nicht sagen, ob Windows oder Photoshop  den Fehler generiert. Ich nutze die neueste Windows 11 Pro Version mit allen aktuellen Patches und Photoshop 27.10.0 

I have a regular Adobe Creative Cloud plan. The oldest Photoshop version currently available through Creative Cloud is the 2025 version.I have a 2019 MacBook Pro and an older iMac, both still very powerful and perfectly suitable for professional work. For quite some time now, however, it has been nearly impossible to work on large projects because the versions released over the past two years are full of bugs and suffer from serious lag across almost every tool.I have just contacted Adobe Customer Support, and they confirmed that, according to Adobe's policy, the oldest version they can provide is Photoshop 2025. Unfortunately, this does not solve the problem at all.I rely on Adobe for my work as a professional illustrator, but I simply cannot work properly if the tools do not function as they should. Considering how much I pay for my subscription, I expect to be able to access a version of the software I am paying for that is actually usable on my machines.I would also genuinely like

After upgrading to macOS 27, Photoshop's brush/tool cursor frequently reverts to the default macOS arrow when I move the pointer or drag on the canvas. It affects both a Wacom/Cintiq pen and an ordinary mouse, and also reproduces in a new blank RGB/8 document. Losing the brush outline interferes with drawing.ENVIRONMENT• MacBook Air, Apple M5, 24 GB RAM• macOS 27.0, build 26A428• Photoshop 27.9.1, build 20260803.r.1, native arm64; also occurred in 27.10.0 before downgrading• Wacom DTK246: main display, 2560 × 1440 at 60 Hz, scale 1• Dell U2725QE: extended display, logical 2560 × 1440 at 120 Hz; Photoshop reports 5120 × 2880 backing resolution, scale 2OBSERVED REPRODUCTION1. Use Photoshop with both displays connected.2. Open or create an image, select the Brush tool, and move or draw on the canvas.3. Once the fault is present, the tool cursor repeatedly becomes the macOS arrow.The exact initial trigger and time to onset are unknown. Connecting both displays alone does not reliably trigg

Hi everyone !I'm using Adobe Photoshop 2026 through an Adobe Creative Cloud subscription on a new 16-inch MacBook Pro with an M5 Pro chip and 24 GB RAM.I've been experiencing a strange issue where a small numerical overlay occasionally appears over my image and gets stuck on the screen.This doesn't happen all the time, but when it does, the overlay won't disappear, and I have to restart Photoshop to get rid of it.The overlay displays the following text (translated from Norwegian):"Minimum: 1.00, Maximum: 300000.00"I've attached here a screenshot taken when this happened on April 3, 2026.I've never experienced this particular behavior on my previous MacBook Pro (2019, Intel-based), or on the MacBook Pro M1 (2020) I'm currently using as a loaner.I'm not assuming this is a hardware problem. I'm simply trying to understand what happened and whether it might be a known Photoshop issue.A few questions: Does anyone recognize this particular numerical overlay and know which Photoshop function

This is a screenshot of the circle I'm referring to. It was changing over time, sort of pulsating. The screenshot is of a portion of the screen showing my browser window. This blue circle stayed in front of any screen I switched to, until I switched to Photoshop. Then it disappears. That leads me to believe it's Adobe software doing it. I'm using a 16" M4 Macbook Pro. Searching the internet for explanations I see other Adobe products are implicated in this same issue.What is the animated icon meant to represent? How can I prevent it in the future? I really don't know what I did to have triggered it. Hovering over it and clicking it did nothing. So it's a useless feature. Worse than that, it's an annoyance, since it encumberts other applications.

I’ve been exploring the new AI Assisted Editor (Beta) in Photoshop 27.10 and really like the idea of using natural-language prompts for common editing tasks.I’m curious about how well it handles more precise edits, especially when using Markup to identify a specific area of an image.For those who have tried it:How accurate are the results with detailed prompts? Does Markup make a noticeable difference compared with text-only prompts? How well does the workflow transition from AI Assisted Editor to Pro Editor for further refinement?I’d be interested to hear about real-world experiences and any tips for getting more consistent results. 💃

I just bought a Brand new PC and Photoshop struggles to operate efficiently utlizing my new GPU. Here’s the specs: CPU: Intel Core Ultra 7 270k PlusGPU: NVIDIA RTX5070TiRAM: 64GBSSD: 1TBOS: Windows 11 Pro4k, 32” Monitor. Problem 1: The issue is mainly with the Object Selection tools and those tools/options that requires GPU. I’ve turned off all settings for Object Selection tool for auto detecting objects. But it still takes a 2-5 secs to fully operational. So even the automatic detection is disabled, when I select the tool, the little loading icon still spins like it’s detecting something. Before it finishes, if I try to draw a rectengle to select subject, it lags behind my mouse movement. When the detection icon stopped, then the tool behave as expected. I’m not sure what happens during the process.No crush of course. However, when I draw a rectangle with Object selection tool, my processor usages goes up to 100% for 1 or 2 seconds. Problem 2:When photoshop starts, if I hit ctrl+N to

Thanks to everyone who took part in our ‘Close shave’ challenge. There were some sharp entries over the last two weeks.This week we take a trip into the woods where we find a mysterious pair of boots and a spade. Something is going on. Can you show us what it is? The “rules”:Use the starter image as at least part of your own image entry. Anything goes, as long as it meets the forum rules on decency, copyright, etc. Anyone, and everyone, is welcome to have a go, whether you are a complete beginner or a Photoshop expert. This is not just for our forum “regulars”. The challenge is not limited to Photoshop. Any Adobe software can be used.  There are no prizes apart from the chance to practice, show off your skills, or bring a bit of humor and fun. Don't be shy, join in and have a go! The starter image is made available for you to use in this forum challenge only.To download the starter image, click it, then, when the image opens in its own window, right-click and choose “Save Image As/Save

Photoshop 27.11.0 on macOS 26.0.1.With Content Credentials enabled, TIFF files record edits correctly and show no warning after saving. After closing and reopening the TIFF, Photoshop reports that some edits or activities may not have been recorded.The same workflow with PSD files works correctly.The issue is reproducible with newly created TIFFs and without scripts or plugins. TIFF files also create a .c2paws sidecar file.Please investigate the Content Credentials handling of TIFF files.

THIS IS SO ANNOYING to see these edges ALL THE TIME!I cannot be going to "View > Extras" over and over again! HELP

im getting a bit desperate, i dont know what to do..Since this morning, any version of Photoshop i try keeps getting laggier and laggier. It started with the scrubby zoom, then the brush, the ruler etc.Despite that, my pc is running well ( 32Go RAM, 8Go VRAM ). I tried to follow many guides and tried this so far: resetting the preferences; changing the options in the performance tab (including enabling and disabling gpu mode); closing other apps; cleaning my pc from eventual craps ( there’s 150Go of free data on my driver right now); reinstalling the Photoshop; using other Photoshop versions; reinstalling my gpu drivers;The lags keep getting worse and worse (linked a video to show the lag) . I have no ideas what to do to fix this problems, it’s especially problematic since i use Photoshop daily.  Thank you in advance :)

Mode Masque Rapide (Q ):  Le double clic ne fonctionne pas.

PS is opening *.jpg, *.tiff and *.psd files with lines at the right edge and bottom.  I’ve fiddles with Windows scaling settings, but I can’t get this fixed permanently. Is there a permanent fix for this?  I’m running PS 25.12.4. Example image below.  

Is there a reason that select subject no longer works, or is it a bug?  Or was it changed and has some really dumb extra step that I'm supposed to do in order to get it to work? I tried changing it to device instead of cloud and the button appears like I can click it, and then says I can't do it because it is not available anymore. How do I fix this so that I don't have to keep going back to the previous version, just to select subject and then back to the new one?  Or just use the old version until fixed?  Which is what I had to do for something else similar to this.   Had to use the previous one for almost a year before something was fixed and able to use the new version. Edit:  So I noticed that if I manually click on a layer further down, it allows me to use it........so this definitely is a bug or a bad change that for some reason was intentional.   Before I could do it above my frequency separation group and above my dodge an

I would like to download an older version of Photoshop /Bridge like Vr 11.0.2Reason I need to work with older .cr2 raw files and .cr3 on a 2019 core3i 8 gb so very limited. I just need to load them in bridge open and make basic adjustments, save and then batch process them all into low res jpg at 5mb ish. 

When I try ad add a gradient to a adjustment layer’s mask it mostly work but sometimes it just won’t let me add any gradient.I’ve tried different settings for the gradient but the only thing that works is restarting Photoshop.Using the Gradient tool normally works fine, and it seems to be mostly affected if the mask has values in it already ( if I’ve painted parts out )It’s on Photoshop 27.10.0 and has been going on for quite a few months now.See video for example of how the gradient tool is not working on the adjustment layer’s mask but does normally.

 I am trying to reproduce the first shape in Photoshop. Please educate me on how to achieve it, because I cannot figure it out by myself. Is it even doable?

This is the first time I am trying to run Object rotate on Photoshop 2026. It prompted me to purchase credits which I did. I followed the instruction everything seems to work but without any warning, the process stopped and object rotate did not work. Please help.