Photoshop

even though we pay for subscription. It worked until last week. Now its blank when we try to open an image to edit. Everything else is working.

So, I’ve recently encountered the following problem: Whenever I try to open a RAW photo—whether from the Sony 7CII or an Olympus OMD-5 Mark II—I get this message:"The embedded ICC profile cannot be used because the ICC profile is invalid. The profile will be ignored."In the meantime, I’ve updated my MacBook Pro with the M3 Pro chip to the latest operating system. Photoshop is also up to date, as well as the RAW Converter. After the updates, everything worked fine at first.However, I then switched to HDR mode in the RAW development process (within Photoshop's RAW module). After turning HDR off again, I attempted to open the image in Photoshop, and now I’m getting the same error message again.What could be causing this?

Select the Object Selection Tool. The try to name or rename a layer with something containing an 'n' like "name". The 'n' will not appear until you deselect the Object Selection Tool. The layer will be called "ame". Have the Object Selection Tool selected. Then create a new layer and try to name it “new layer”. The ‘n; will not be able to type into the name. You will get “ew layer”. If you deselect the Object Selection Tool then the ‘n’ will work again.

Clients are using FREE AI tools to remove their watermarks from my online galleries and aren't ordering finals (and thereofre aren't paying for them and are color correcitng or worse- Not color corrrecting and sing/posting.  Pixieset to showcase images inhgi res no mater how small I make them. I'm thinkin low res proof sheets would resolve this- But how do I get my watermark and the proof sheet done in photoshop without hours of extra work?  Also, how would you deliver the proof sheets?  (gmail?  dropbox?).  Quite upsetting- it feels like I've been stolen from - ouch!  And I'm concerned about how time consuming this newprocess could be!  I can't charge more and include- in my market, noone would pay more and i'm already doing too much for too little (modeling industry, kids fashion, etc)

This is shown first when I type in a text layer and it replaces some characters with others (such as ‘ with û) or making all of the typing “dddddd.” If I close the file and reopen it, then try restarting the app, and then the computer, the file opens but causes Photoshop to respond very slowly and the text problems continue. The only way to fix this is to discard the new file and reopen an older version (and lose many changes!).

Hello. As I try to use the new Generative Expand function, I get the following message (attached): "To use this feature, first drag the canvas to expand." I'm calling this a "bug" because 1.- it makes no sense at all "first drag the canvas to expand" what does that even mean? – and 2.- because there is no further explanation, tutorial, click here to see more", etc. I tried dragging the canvas (the way I understand that) but the nonesense message keeps popping up (please consider getting some English Major to create these pop-up messages. Software Engineers... well, only they can understand themselves.) Ideas? Guidance? Thank you in advance. A.C.

Generative Expand. error code 1200 description Line: 13 -> var g_StackScriptFolderPath = app.path + "/"+ localize("$$$/ScriptingSupport/InstalledScripts=Presets/Scripts") any suggestions as to how I can fix this? 

I would like to change the canvas size via action in Photoshop 27.4. I’ve tried to record changing canvas size but I doesn’t work correctly. The dimensions wasn’t saved. Steps to reproduce Open a document. Create a new action in the “Action” panel. The recording starts automatically Go to Image → Canvas Size… Let the units as it is. Switch the size mode from to Relative. Enter values for Width and Height Click OK to apply. Stop recording the action. In the action the appropriate parameter for Width and Height are empty. The same steps in Photoshop 27.2 working correctly. The same issue was reported for the Photoshop Beta here. P: Canvas Size relative Width/Height not recorded in Actions (values saved as blank) | Adobe DME A temporarly workaround is to deactivate “Enable Modern User Interface” option. After a restart of Photoshop it worked. 

Hi Previously I had been able to use the ‘remove reflections’ tool in Camera Raw through photoshop...until it recently just randomly stopped working. All the other Ai tools still work for me, just this one fails and I get an ‘unknown error - unable to remove reflections’ message,Restarted photoshop, upgraded to the latest version of photoshop and camera raw...nothing helps. Even uninstalling and then reinstalling photoshop hasn’t helped.Mac OS, Ventura  13.6.5Mac mini - chip Apple M216 gb memoryThe error still occurs even when I have no other adobe products open.Any ideas or help would be greatly appreciated…Thanks

I noticed that in Photoshop 26.9.0 the Build‑up option is always active, even when it is unchecked in Brush Settings.This makes it impossible to paint without build‑up.The issue also occurs in the Photoshop Beta 26.10.0.System: Mac mini M1, macOS Sonoma 14.7.6Video attachedhttps://youtube.com/shorts/0WhFV-f1lls 

Hello,I am preparing service and before-and-after images for my website:[Link removed by mod]The images look sharp inside Photoshop, but after exporting and uploading them, some appear slightly blurred or have large file sizes.What Photoshop workflow would you recommend for website images?I would particularly like advice on:- Recommended image dimensions- JPEG, PNG, or WebP format- Export quality settings- Converting images to sRGB- Sharpening before export- Keeping the file size low without noticeable quality lossThank you.

I have been using Topaz Photo Ai for a couple of years, and was super impressed right from the start.  At the end of the first year I was asked to pay for another year of updates, and decided to wait till some real changes in the app’s quality.  When I saw the Wonder model examples I thought the time to pay out had come, only to find they had switched to a subscription only payment model, with a commitment to a full year at significant cost!I have found DXO PureRaw which gets good reviews and is attractively priced.  I have also seen mention of OnOne NoNoise, and I know I can get similar sharp images from blurred originals with NB Gemini 3 so I love to hear if other people are in a similar position, or have experience with DXO Pure Raw or alternatives?

Photoshop intermittently behaves as if the Shift key is being held downFor nearly five years, I have occasionally experienced an issue where Photoshop suddenly behaves as though the Shift key is being held down, even when I am not pressing it.For example, when I use a transform shortcut, Photoshop repeats the transformation as if Shift were pressed. When I merge layers, it sometimes merges all layers as though I were holding Shift. This happens despite the Shift key not being physically pressed.Pressing the right Shift key once temporarily restores normal behavior, but the issue eventually returns. I have been dealing with this problem for about five years.I have also found several older posts describing the same issue. Is the Photoshop team aware of this bug? Is there any permanent solution or workaround?*This post has been moved by a moderator. 

Cancelé mi suscripción de Photoshop el 21 de julio de 2026 aproximadamente a la 1:00 a. m. Sin embargo, ese mismo día se realizó un cargo por MXN $1,828.68. Solicito que revisen la hora de la renovación y de la cancelación y, si la cancelación fue registrada antes de la renovación, me ayuden con el reembolso del cargo.

To get it back, I have to use the menu Window > Uncheck CTBar, and then use Window > Check CTB. Every time I get the CTB back, I pin it. This only happened when version 27.5.0 was released.

Suppose you have a simple image of an object like a teapot.  You would like to be able to use this image to create several stencils: one of the bowl and spout, another of the lid, and a third of the handle.  What steps would you take within Photoshop in order to turn your image into three such stencils?

ESTOU TENDO PROBLEMAS PARA EXPORTAR PRANCHETAS NO PHOTOSHOP, alguem sabe sobre esse erro?

I have drawn a property line on my drone image using the polygon tool. It will not save as a jpeg with the lines still there. How do i  save it so the lines show up?

Please revert the changes to the hand tool. It’s been a while since it was changed but I really miss the old one. Or make it a toggle feature. I don’t like how it scrolls with the box now and I liked how clean the original hand tool felt.

I couldnt use photoshop for six months unfortunately. I was using the simple tools last year. But its freezing now. When I try to paint ım waiting because of lagging. In my opennion my computer is enough for photoshop software. I attached my computer’s spesifications. What is the solution?  

During my daily use of Ps, a pop-up just came asking me if I’d like to dismiss dynamic preview while Manual Transformation on a Dynamic Object with Dynamic Effects to optimize performances.I miss-clicked and accepted, which led me into not being able to foresee what my layers will look like from now on while I manually transform them.I thought it was ok and I’d just reset that option that isn’t suitable neither useful for my use of Ps and therefore went into the Settings panel.I went through literally every single item listed in every single folder of the Settings panel and nothing matched this option and could help.I then decided to completely reset Ps settings, closed it and re-opened it ; it wouldn’t work again.I had to uninstall the software and erase any user preferences to reinstall it and recreate my Workspaces to make it work like it did 2 days ago… EDIT : I created a new document with a simple square and a shadow cast effect, worked fine.I re-opened my documents, tried to modi

Since a short period I have the an ‘unwanted’ effect in Photoshop.When an image is on screen,  I regularly want to adjust the image borders (I mean the borders of the screen that holds the image) to reduce that screen with the image. During this action, the image itself also gets temporarily smaller and afterwards retakes its original size on screen. I’m losing time with this effect and it is also disturbing.I would like to know how this effect can be switched off.Adobe Virtual Assistant suggests I should deselect the Resize Windows To Fit option, or that I should deselect the Zoom Resizes Windows option, but this doesn’t work.So which Photoshop option would control this effect?

When I click on an imported layer to adjust, when I save the change it is saving over the original file, not just overwriting the layer. How do I stop this happening. I have tried Edit contents and replace contents to try and solve this issue. Can someone help with a fix please?Thanks