Photoshop

A crash happens consistantly when using Pattern Preview, steps to reproduce:- Create a document - Create a Solid color with a mask - Turn on View -> Pattern preview - Create a selection for part of the mask using any selection tool - Move that selection Using Move Tool - Crash occurs

When using multiple artboards in the one psd, when i try to use 'export as' to quickly export jpgs i'll be lucky if it exports two of the artboards. The menu closes as if its completed what you have asked it to do but it doesnt do anything.

When I am exporting an image using the Export As dialog, and I enter 200px for the width, it will sometimes automatically change to something else when I tab out (e.g. 196 or 197). My guess is that this has something to do with Photoshop translating my pixel input into a percentage with a limited number of decimal positions, but this is ridiculous. I need to be able to export my image to exact pixel dimensions and Photoshop should be able to do that.

It looks like there is a colour management bug in Export As. To test my working colour space is Adobe RGB, but I created a document in ProPhotoRGB and followed the process below:   a. I created a 16 bit document with a gradient running from RGB 07,53,25 to 50,98,50 in ProPhoto. (Readings are in 8 bit but document is 16 bit)   b. First I changed that to 8 bits - No visual change, Info from eydropper still shows gradient running from RGB 07,53,25 to 50,98,50 so no change in values either. That is as expected.   c. I stepped back in history to the 16 bit document   d. I used Export As to export a PNG in PNG24 format with no change of profile and the profile embedded. On reopening it opened in Prophoto but the values had changed as had the visual appearance. The gradient now ran from 0,77,33 to 53, 125, 60. Expected behaviour would be no change in teh colour values or visual appearance.   e. I repeated step "d" but used Save For Web (Legacy) again exporting P

I am finding that when i use "quick export as png" or "save for web" the layer effects are not applied...?   only when using "save a copy as" the layer effects are applied

In Photoshop 23.x (2022) for Windows, when adding a Hue/Saturation adjustment layer and a particular hue is targeted with the hand tool, moving the Hue slider does NOT cause the bottom-most gradient to reflect the different, modified choice of Hue. (i.e., the upper gradient reflects the hand tool's choice; the bottom, the newly chosen value.) Photoshop version 23.1.0 - no change in bottom gradient   This is DIFFERENT behavior from version 22.5.x and previous versions. I'm posting this again because an Adobe employee did not seem to understand what I was describing in a previoud post.   Photoshop version 22.5.1 - modified gradient, as expected

In Photoshop 23.0.2 under macOS Big Sur, when the artboard is not visible (i.e., when the window borders are flush against the edges of the artwork) and the entire image is visible on screen (i.e., no scroll bars), and you Select All, the marching ants are not visible like they should be. Sometimes, depending on the window dimensions, a sliver of the marching ants is visible on one or two edges, but most of the time, they are completely hidden. Here is a video of the problem:   

Photoshop 23.0.0 does not show active selection when stop popup is shown when running an action. If you cancel selection is visible again. Same action in 22 or 21 versions does show active selections on same system. Osx 10.15.7

Hello, it seems that there is a big bug with the "Slice Select Tool", especially with the "Divide" option.I have a 1792 x 512px image containing 64 x 64px tiles that I want to cut out. When I use the "Divide Slice" and split 64x64 pieces horizontally and vertically with the Preview option enabled. The preview is distorted (specially if the values of are greater in pixels per slice fields at default) and persistent, even when cancelling/closing "Divide" dialog and closing the current document.The "Divide Slice" option only works if the "Preview" option is not activated.   Regards, Nico.

* Env  - Photoshop 23.1.1 Release  - Windows 10   I want to know that NFT features in Photoshop. But I can't access the page after clicking the menu. (File > Export > Learn how to export for NFT) 'Learn how to export for NFT' is translation result. So it may not be perfectly matched in Photoshop menu. Now, if I click this menu, browse 404 error page in adobe.   Anyone, Please let me know how to export for NFT in Photoshop. (or guide page)

In all PS versions 23.0.2 and earlier setting Grid to 33.34 Percent with Subdivisions = 1 created a nine-section, tic-tac-toe-style grid which divided both horizontal and vertical axes into three equal sections, providing nine working sections, each having a ratio equal to that of the canvas.   In PS 23.1 setting Grid to 33.34 Percent with Subdivisions = 1 creates canvas full of squares, each of which has all sides set to (essentially) one third of the horizontal value of the canvas only, regardless of vertical value.  There appears to be no setting available to force behavior to divide vertical values by any percentage.   If this change was purposeful, it has deprecated one of my most important tools for composition.  If it wasn't, please arrange to align this setting with results obtained from previous versions.   PS 23.1 uninstalled; reverting to 23.0.2 pending correction or confirmation of intent to change.

After upgrading to 19.5.1, this issue still persists. I am rendering 175 frames into a video and the Initializing Video Export progress bar gets about 80% across and stalls. The program is unresponsive after that.

I try again with a new post since the previous one has not been understood. Using in Photoshop 23.0 the "Gradient Map" adjustment layer even with the "Classic" Method is not backward compatible. Does not work as expected. I need to specify, since the previous post received a wrong reply regarding the "Gradient Fill", that I'm talking about the "Gradient Map" (not the Gradient Fill!) adjustment layer correctly setted with "Classic" method. Even with classic method the Gradient Map will be not read in the previous version of Photoshop. The only way to make it readable in previous versions is convert the image layer in a smart layer and apply the Gradient Map as a smart filter (from menu "image" -> adjustments -> gradient map), always in Classic Method. In this way the gradient map will be read even in the previous version. So, please, there is a bug with the Gradient Map adjustment layer in Classic method since should be backward compatible. Please, make a test and kindly repl

So I've been using Photoshop sine it's very first commercial release. (Yes long time and yes I am old now LOL)   So I just installed versions 2020 & 2021 and when I have the timeline palate open but unanchor it, the Fit in Window command causes the file to resize to the complete height of my monitor so the bottom 5th of my file is blocked or covered by the Timeline Palate. However, if I anchor it and Fit in Window, it resizes the way it always has, right to the top of the timeline palate.   It use to be that you could place your timeline palate either at the bottom or the top and when you'd select Fit in Window it would resize the file to fit up to the edge of the Timeline Palate.   Can this be fixed??!?!!?

Hello, Each time i export an image via the function "Add to Photos" (Mac), the image is correctly exported but after that all menus are greyed out and the only possibility to get out of this is a "Forced stop" of Photoshop as "Stop Photoshop" is also greyed out. No possibility to close the open image, no possibility to open another image, no actibe buttons, ... See screenshots (export & greyed out menus).   Already reinstalled Photoshop several times, reset all settings, without any plugins, ... nothig helps. With previous versions of Photoshop there was no issue at this point. All latest updates are installed.   Adobe Photoshop 23.1.1 20220106.r.202 060a6d1 x64 Mac OS 12.1.0 - iMac Pro 27" - Intel CPU:6 3200 MHz  - Memory: 32768 MB GPUForce: 0 - seGPU: 1 - useOpenCL: 1 - isGPUCapable: 1GPUName: AMD Radeon Pro Vega 56IsNativeGPUCapable: 1 - IsOpenGLGPUCapable: 1 - IsOpenCLGPUCapable: 1 - HasSufficientRAM: 1GPU accessible RAM: 8

Hi, inside Photoshop (not even the entire programm, just die "workspace" you see when opening a document) all white tones are slightly tinted yellow. I know that this is a common problem an I have had it before multiple times and was able to fix it multiple times. This time things are different, though. I already changed profile to sRGB IEC61966-2.1 and it is still not fixed. This problem does not exist in any other Adobe programm (or ANY programm for that matter). Also, it's probably not a monitor-thing, because ist equally as bad on my other monitor.   My specs: Monitor 1: dell u3219q Monitor 2: Samsung Sync Master 2443 OS: Windows 11   Thanks in advance  

PS 2022 Object Selection Tool is not working.  It just puts a blue highlighted box over the subject.  I have many different photos and the same thing happens every time.

I'm getting a random crash only when using tranform tool. Photoshop is completely up to date, Mac Os is up to date. Adobe customer service reset photoshop to factory settings and still getting the issue.  The issue has persisted for 2 years with no resolve. My files are normal size - nothing crazy - around 3300 x 5100 pixels 300dpi. The issue tends to happen more when there are several layers and when working on a file and using transform tool on and off for a couple hours. Max layers 10-15. This is happening to all Psd files.   macOS Monterey 12.1 Processor - 3GHz 6-Core intel Core i5 Memory - 16gb 2667 Mhz DDr4 Graphics - Radeon Pro 570X 4GB   Any help would be greatly appreciated  

Photoshop for iPad Selection “Output As” tool is bugged   Everytime I select something and use the "refine edge" tool on the bottom and try to save the selection as a new layer or a different option, it freezes up and I have to hit cancel or it crashes completely.   Adobe, please fix this issue!

I found a bug that I don't think existed before 21.1.0. When mouse-dragging multiple artboards, they glitch out, with the artboards and their contents getting out of sync with each other and jumping to unexpected areas of the canvas.Please see GIF below (also here: https://gph.is/g/Ev151vV ) Image is not available

Hello, dear friends.From cc2015 to 2018 i can drag and drop any content to a document in PS that i generate in the panel as png or jpeg. In my case it canvas html5 that create some "Magic".But in PS 2019-2020 its not working. I don't understand why.I send example image via iframe (The principles works the same).https://dl.dropboxusercontent.com/s/to2g377xnvevd8f/ScreenRecording2019-11-29at13.26.48....I would really appreciate your help to fix this problem.

i was promised weeks ago, that Bug Id PS-38302 would be fixed in the upcoming update of Photoshop. Couldn't deliver to customers all this time, because i rely on hdr - and i cant create usable hdr-files, since it is a major bug not a minor one (how is that possible in a version 20.00x?). no previous versions works either!!!Update is here, Problem not fixed at all - I cant deliver any work to my customers and are loosing orders!!!!really, this is not acceptable!!

From my iPad Pro, I can't see a cloud document file that should be there. I can see the file on cloud from desktop version of Photoshop.I posted this issue here, but nobody gave me an answer.1.  I uploaded (save as, to the cloud) the files in Photoshop on my desktop PC.2. I opened Photoshop on the iPad. The files were listed in "Cloud documents".3. I opened the files. Pop up dialog said it should take long time as my internet connection was slow (in Japanese). Actually, my internet connection speed is about average, which is not too slow.4.  My iPad went to sleep automatically.5. I woke my iPad. I no longer could see the files. The download dialog was gone. Downloads didn't seem to be continuing. The files were not shown in the Cloud Documents. I still could see the files on cloud, from my desktop PC.6. After waiting of one to 24 hours, the files re-appeared.7. The files could be seen under "Cloud Documents" on https://assets.adobe.com/ when the

When editing an existing text layer, Photoshop automatically capitalises the first letter of the first word — regardless of where it appears, and regardless of the the Shift and/or Caps lock status.To replicate: Add a text layer Enter text Edit the text layer Enter text (capitalisation is enforced) This can get very tedious when you’re editing large blocks of text.

The home screen shows recently opened files listed by "last modified" regardless of whether or not the file has actually been modified, and shows a modification time which is entirely spurious and misleading. It would be better to have an option for "last opened" or "last viewed".