Questions

How can i fix the problem of audition 1.0 freezing when recording. Windows XP Version 2002

So basically I have a song and its studio instrumentals (without the vocals) and I want to use that to create the cleanest acapella possible. Trying to align them then inverting doesn't really work for me, unfortunately, but I was wondering if you could give me any tricks or tips I could use (other than stuff like center channel extractor that are mainly for when you don't have the instrumentals) when I do have the studio version without vocals.Thanks in advance!

Me again. Not sure if this is an Adobe problem but once in awhile I get this "cave" like sound through my earbuds, as if I weren't even wearing them. You'd think that my room was covered with speakers on the ceiling. Sometimes I pull out the headphone jack, plug in, say "Ok" to "what do you just plug in?", and it would be fine. It is now exclusively the cave sound (except music, that's fine. Spoken word, nope).Any advice? Thanks in advance

I just installed adobe audition, and it won't allow me to click on half of the tools in the tool car, and I can't select them any other way. I reopened it and it allowed me to use Hal to tool bar but not the tools I need.

I've recently gotten a new computer and successfully installed CC and Audition on it. However, on starting audition I get this notificaitonI'm sure I am connected to the internet as I was browsing the web for solutions to this problem. Any help would be greatly appreciated

Okay here it is, the green line-with-boxes-squares-going-through-thing. I did find out that it is actually recording. I thought it was just a bug but it is recording because after I hit stop I accidentally hit the spacebar and I could hear my voice saying "oh there's the green boxes." Usually I just hit delete and it clears it and then I hit record and usually it begins the normal waveform. But recently sometimes I have to delete the green lines with boxes two or three times to get a recordable screen.My newest problem now is when I plug in my earbuds to my computer to listen to my playback I'm getting echo. It used to be as soon as I said "okay" to a screen prompt "what did you just plug in?", it would go back to a normal contained sound. Now I can't get rid of the echoey sound that is going on.Thanks in advance.

I have been having a problem with my Adobe Audition. After I record my chapter, I go back and edit it and when I start doing that it just freezes up. I start pulling the apart to do away with breathes and little noises to delete and it just freezes up. Anyone have any idea what is causing this?

I purchased Audition 1.0 when it came out and upgraded to Version 3.0 some time later (i.e. I purchased an "upgrade offering").  I am now trying to re-install Version 3.0 (PC re-build).  The Audition installer accepts my upgrade S/N, but is now prompting for my original Version 1.0 S/N.  That V1 CD and S/N are long gone.  What can I do to install Version 3.0?

Hi everyone, I'm a new Audition user and I'd like to plug in my AT2020 mike with this particular USB converter cord. The cord blinks when I plug it in, indicating that there's some sort of data, signal, or information running through it. When I select it in Audio Hardware Preferences, I believe it's showing up as USB PnP Sound Device. But so far no signal when I hit record. Please advise! Thank you.

This is probably a totally easy question, and I'm just a newbie not understanding what I'm doing. Nonetheless, here's the problem I'm having: I have a stereo recording and I put the right and left channels into two separate tracks in the multitrack editor, because I want to manipulate them independent of each other. I want to cut out a portion of the audio and create a crossfade between the two parts, and I want this to be identical for both tracks. So I used the time selection tool to select the portion of the tracks I want to remove, then I used "Ripple Delete — Time Selection in All Tracks." Once I removed that portion, I selected the later clips on each track and dragged them left to create a crossfade. Everything looks normal, but when I play back, the crossfade works on one track but not the other. Namely, track 1 works exactly as I expected, but track 2 just fades out. The next clip never fades in. So I'm left with only track 1 playing after the crossfade. Does anyone have any i

Please help, I cannot figure out why this error is popping up. Music plays from my laptop speakers just not through audition.

Does anyone know where the Amplify widget went in the 2017 release?!Just updated to 10.1 from 7.2, and can't find the Amplify widget in Waveform view. This is a huge part of my workflow --- I bounce projects into Audition from Pr, open up each clip in Waveform view, adjust the level as needed, run a custom preset I've built, and move onto the next clip; I'm not sure if it's the "correct" way to work, but it's super fast and efficient, and I've got it down to a science. Am I missing something? I've combed over every logical part of the UI, looking for a way to restore/activate/open the widget, but can't find anything...Near as I can tell, the only workaround is to go to Menu > Effects > Amplitude & Compression > Amplify > enter the value > hit EnterIs that for real?! With the widget, I just hit CTRL + A to select everything, type the value, and go. Having to navigate through the menu literally a hundred times during a project is a HUGE waste of time. This can't be rig

This is my first time on this forum. Thanks for any insights in figuring out this problem in advance.I've got a pretty powerful Windows tower; i7 processor, lots of RAM, SSD drive, upgraded CD burner (that I just had replaced) and it's used primarily music production.I like to bounce .wav files to CDs for clients to review and thought Audition would be a good tool for such.The settings are all correct and the CD writes, but isn't recognized by a player. I don't have any reason to think it's the media; I've tried more than one brand.I've never found this to be that big a deal before, so I'm surprised that I'm bumping my head on this. Thanks again,Jim Westlyn

Our church is starting to use video announcements and I'm putting that together. Using Premiere Pro for the graphics but recording the voice-overs in Audition. I use a PC. The church has a Mac. The MP3s I created on my PC will NOT play on the Mac. I can see the waveforms and the sound level bars move, but no sound. This is making me crazy. Can anyone help, please? An MP3 is an MP3, isn't it? Does it matter what system it was created on? Many thanks.

When I add the denoise plugin (CC 2019) to the effects rack in multitrack, it overworks at the beginning of each track, making the beginning sound like it is underwater, which carries over to when the file is exported.It works fine in waveform view, but I'd like to use it in multitrack if possible so I can adjust it based on other effects being added, or if I normalize in multitrack.Does anyone have any advice on how to make this work?

HowdyWorking with an audiobook on an iMac with Audition CC2019, and attempting to adjust one character's voice to be slightly deeper/lower in places.  I have been using the Manual Pitch Correction tool with keyframe adjustments and lowering the voice by 80db, which sounds perfect.  BUT -- as I go back through the track once I have made my changes, I am finding a distressing number of pops and some weird distortion on certain words, and have had to go back to square one, remove the pitch adjustments in those places, or use Auto Heal Selection, and that seems to be fixing the problem.  But why does Pitch Adjustment cause these artifacts in the first place?  Is there a guideline to using this feature that will help me reduce the workload?Thanks!Rob

I am looking for any tips for smoothing out edit boundaries in multi track view. What I do now is put a fade on either side of the cut to mask the sound, but I'm wondering if there is a way to use cross fades without putting tracks out of synch, and without having to select all clips. Thank you.

I already followed the steps on Audition Crashed. Now what? and am still waiting for a reply. I was hoping if anyone can chime in or has experienced this lately. 2 weeks ago my stem exporting went fine. I have made edits and need to re-export. Now this...Audition crashes on export for versions AU CC 2017.1.1 Build 10.1.1.11AU 2018 Build 11.1.1.3and latest AU 2019 Build 12.0.1.34Session is a 5.1 mix for a film reel, around 25 minutes long with several buses and tracks.Whether I export via buses or master, it crashes after around 5 minutes. I have been trying to export the same reel since February 12 on 2 different machines on the different AU versions stated above with no success.Video 1 - AU CC 2017 ,some session details, no crash report generated https://youtu.be/3VvewpIgx4oVideo 2 - AU CC 2018 (same project) with crash reporthttps://youtu.be/y1yq8qaTFbQVideo 3 - AU CC 2017 (same project) repeated screen cap for crash report https://youtu.be/GnsCQOMLx1APlease take note that the video

Hello! After updating AU CC 2018 to 2019, the output from the altiverb plug-in from the mono bus was missing. I have done a great job with snapshots and reverb automation in multisession.The plugin shows that it is located on a bus with 6 channels, although in fact it is on a mono bus. But if you add a new altiverb plugin, the output works fine. And his input and output is only 1 channel.Now, when I have one month left before the premiere of the film - am I forced to renew the huge work with automation again?And why is it still impossible to save automation separately? I really hope for your help.

I converted 36 WAV files that range from 10 mins to 1 hour in length in "batch conversion" from 48000 to 44100, and all of them now have a horrible hiss.  What happened?   Can this be reversed??

Posted on Image-Line Forum:Juice pack effects VST when applied missing first 0.2 secHello;I just bought the Juice pack effects to use with adobe audition CC 2019 (VST) they're registered and working almost fine, when I apply any of the effects in this pack EQ, Delay, Love philter etc to an audio clip (not using it in real time but applied just to that clip), the first 0.195 second of the audio clip doesn't take the effect, sounds to me like the effects have some kind of delayed response or a fade in responsefor testing purposes I added 1 second of silence to the start of a file and the processing worked fine but what about when I need to apply an effect in the middle of a dialog and I can't cut the file? I need to be able to process only the selected part of the file.Please advise in how to fix this issue.Thank youfmaudioTopRe: Juice pack effects VST when applied missing first 0.2 secI assume this is a feature that applies it to the sample in a frozen state instead of real time.Most li

Hi ThereI'm very new to Adobe Audition, but I edit video using Premiere.  I'm looking to edit some sound to video using the Multitrack feature of Audition. Premiere is unable to work coherently with multiple layered audio clips with various effects on them. I want to make audio collages for my films, but every time I reopen Audition all the sound files that I have imported into the project haven't saved. Is this a glitch or the way it works? I imagine the former and I was hoping someone could shed some light on this.ThanksJack

I'm new to Audition and have set all the Audio Hardware, Audio Midi Setup, Etc to default, sample rates all match, etc. But Audition will not record any audio when I create a new file and hit record. Just silence, and it's not picking up anything. Tried default mics, tried external interface, etc. Running newest version of Audition 2019, and have also uninstalled and tried other editions as well.Anyone have any idea why it will not recognize the microphone or record on my Macbook Pro?  Playback of other Wav. files works fine. Garage Band works fine, records fine. Very frustrating.

I wrote this discussion 1 month before, but no one fix this issue.During the time it makes me more and more stressful.Please save me...When I turn on "Manual pitch correction", sharp peak noise comes up just after "play" as shown as above. And it comes from the right channel only.I use Yamaha AG06 mixer, and "Yamaha Steinberg USB ASIO" for audio hardware. And surely, I match sample rate of hardware and multitrack session by using 'Yamaha Steinberg USB ASIO' driverI can hear this noise from my speaker and headphone. And this sharp noise makes me stressful...If I change audio hardware "MME" and "Line" output, these noises are dissapeared. (However, I can not use that setting for recording and mixing)How can I fix this problem?

OK, so I was already on chat for an hour and they were taking forever, plus the guy left in the middle of his shift and promised to pass me off to somebody else but didn't so here is what's going on. Occasionally, I get a green line. The same color as a waveform. It's green with these little green boxes going thru it, and it's all sort of vibrating a little bit. I have to hit stop record delete and then hit record again and usually it works. My other problem being Audition continues to go into a not responding mode and has to be ctrl-atl- deleted and started in order for it to work.Thanks in advance.