Questions
Recently active
On my Mac (27.01) on Friday 10/7/2026, Lightroom Classic updated to version 15.6. Prior to the update, my folders looked like this in the Library module:After the update, they looked like this:Now only images from the last import are accessible (import was completed several days before the update). All other folders show the number of images, but will not display any image thumbnails or previews. How can I solve this? For additional info, this is a screenprint of the actual folder structure on disk:
Is Adobe AI Denoise fully optimized for GoPro MISSION 1 PRO 50 MP GPR RAW files?I've been comparing 12 MP and 50 MP RAW files from the new GoPro MISSION 1 PRO.Without AI Denoise, the 50 MP RAW files look very good and preserve more detail and color than the 12 MP files.However, after applying Enhance > Denoise, the 50 MP files frequently develop visible artifacts, while the 12 MP RAW files remain clean and natural.Other users have reported similar behavior.Is this a known limitation of the current AI Denoise model with these new GPR files, or could this indicate a bug?Are there any plans to optimize AI Denoise for GoPro MISSION 1 PRO 50 MP RAW files in a future Camera Raw update?
So I don’t use lightroom for anything that graphics intensive. It’s main purpose as far as I am concerned is to embed keywords into the files. But When I tried exporting an image, it turned my desktop black. I am sure this is probably indicative of a much bigger problem because who cares about lack of wallpaper on a desktop. Anyway, I googled that it was probably something to do with incompatibility with drivers or not having the latest version of lightroom. [BTW, I turned off auto updates because the updates always ruin everything and make everything unusable with all this AI bloatware… but I digress]. This time, I updated lightroom and it still happened.Is this reallyl a thing. And do I need to permanently turn off graphics card acceleration? Really? It keeps nagging me to turn it on too.I have the latest Nvidia driver from the Windows update site [or Dell or whatever it is]. No, I did not download the latest Studio driver from Nvidia’s website via their dedicated app because it seem
I am not sure what is causing the problem you see below. It only happens when I am tethered to LRC and scanning film negatives. I am using a Canon EOS R5 and the 100mm R macro lens. I have been using the same setup for three years and until a couple of months ago I never had an issue. Thankfully I was away for the summer and hoped that by purchasing a new Tether Tools cable while away the problem would disappear on my return… it didn’t. I removed the lens, cleaned the lens & camera connections, used a different battery, removed the memory card, tried another lens and no change. The camera software is up to date.The flashing symbols only appear in tether mode and not while shooting nor does it leave an imprint on the negative scan or image. I could ignore it, but I am almost sure there must be an explanation for it. The camera has never been used for anything other than scanning and has never been outside so it can’t be overuse.edit: I have a Mac Studio desktop and MAC OS Tahoe 26.
Here’s your workflow rewritten into a clear, reference‑style checklist that’s easy to share in forums like Adobe’s community:🖥️ Hardware & SetupCPU/RAM: AMD Threadripper 3970X (32 cores, 64 threads), 128 GB RAM Catalog Drive: Samsung 990 Pro (2 TB, dedicated to Lightroom Classic catalog) Import Drive: Samsung 990 Pro (4 TB, used for incoming imports) Camera Workflow: Nikon Z9 → 256 GB XQD card (1.7 GB/s read speed) using a USB 3.2 card reader on a 20 GB/s port📸 Import WorkflowAssisted culling: Disabled Face detection: Disabled Location lookup: Enabled (images GPS‑encoded) Import preset: Imports to incoming drive, renames files Preview setting: Minimal previews Typical batch size: 1,000–1,500 images🔒 System ConfigurationLightroom working directories: Excluded from antivirus scanning⏱️ Performance Observed Direct import via Lightroom Classic: Duration: 20–30 minutes Behavior: Lightroom often becomes non‑responsive Copy + rename via Advanced Renamer, then in‑place import: Durati
I have just spent over two hours trying to view & edit some pictures in LrC but keep getting the message "Lightroom not responding" & have to close it down & try again. About 30+ times so far. First I couldn't even get it to show the folder I wanted then next time I got as far as viewing the folder but was unable to select a picture before it stopped responding, next I got the piocture but couldn't move in to Develop etc, etc.This is not the first time this has happened, which is why I haven't edited anything since before Christmas as it is so annoying. Especially after having the issue with photoshop that wouldn't recognise RAW files.How can Adobe justify increasing their prices when their product fails to do what it is meant to do.On top of all that I have just heard that the prices are rising & that the most affordable package is being withdrawn. Something I only found out by accident as I had no communication from Adobe to inform me of this. Apparently it was
LrC up to date (15,6) however when I go to LrC and use a people image, then use masking icon, the icon to use the latest upgrade (i.e.) as shown by Terry White, is not there. Dale
I use a Mac M5 Max with mac OS Tahoe 26.6 - lighroom cc keeps crashing within about 5-10 seconds of launching the application. What should i do? I have granted full disk access and tried disabling the graphics processor already.
So continuing the saga of importing from a cfExpress type b Card raw files from my z9. It takes about 9 hours to import roughly 4k files. I am using a reader and very fast cards for read and write speeds. Some of the events I shoot leave me with more than 10k images to import so just moving into a folder on my harddrive and then imporing is not practical as I end of with files with the same name spread over multiple cards...LR renames the file when writing to prevent this from overwriting existing images. This slowness has persisted for several years now as I h ave been reading about this issue for quite a while. Adobe you can do better..please fix this.
Bonjour,Je rencontre un problème persistant avec le module Impression de Lightroom Classic, et les différentes procédures de dépannage déjà effectuées n’ont pas permis de le résoudre.ConfigurationLightroom Classic : 15.5 Build : 202607291506-b8869fa7 Système : Windows 11 – 64 bits Version Windows : 11.0.26200 Processeur : 12 processeurs logiques Carte graphique : NVIDIA GeForce GTX 1060 6 Go Camera Raw : 18.5 Catalogue principal : C:\Users\jadly\Pictures\Lightroom\Lightroom Catalog.lrcatDescription du problèmeDans le module Impression, le menu Style de disposition propose normalement :Une seule image / planche contact Collection d’images Collection personnaliséeCependant, lorsque je sélectionne Collection d’images ou Collection personnalisée, l’interface ne se met pas à jour.Les panneaux de droite restent systématiquement ceux correspondant à Une seule image / planche contact, notamment :Paramètres d’image Disposition Repères Page Travaux d’impressionLes panneaux attendus pour les mode
I'm doing a lot of work where I have 2 different edits for images and it takes forever to go back and copy the other edit and then have to go back again to copy different edit. I don't want to create a preset since the edits might just be for that specific day/time.
Les "modèles utilisateur" que j'ai créés apparaissent dans le panneau de gauche et dans l'aperçu en haut à gauche, mais ne sont pas visible dans la fenêtre principale (style de disposition : collection personnalisée) et donc, ne sont pas utilisables. De plus, le panneau de droite reste figé et ne permet pas de créer de nouveau modèles (p.ex. le sous-panneau "cellules" n'apparait pas).
Bonjour,J’ai des photos en double dans un dossier et les doublons ont “ 2.RAF” ajouté à la fin du nom ([espace]2). Hélas LR me sort tous les fichiers qui se terminent par “ 2.RAF” mais aussi ceux qui se terlminent par “2.RAF” (sans l’espace)… Comment contourner ce problème ?Je suis sur MAC.Merci
I run LrC on a Windows 11 computer with German as system language.From 15.5.1 on LrC does not show its UI after its launch after having changed the language in the Presets to English. It is only shown in the Windows Task Manager as Background Process.My test sequence:Today I updated LrC from 15.5.1 to 15.6: LrC showed its UI, the Presets switched the language to the system language, in my case German. I switched the language to English and clicked “Restart ...”. LrC restarted and no UI was shown, only as Background Process.Then I downgraded LrC from 15.6. to 15.5.1: exactly the same as aboveThe I updated LrC from 15.5.1 to 15.6 again and after launching it the UI is shown - in German.I’m afraid to change the language again.
Hey everyone! We usually have a very short window between shooting, importing, editing, exporting, and uploading the images, so speed is extremely important.Right now, I’m using a Canon R10 and shooting JPEG at medium quality. I may eventually move to RAW, but before doing that, I’d like to make my current workflow faster and more straightforward.1. Automatically applying edits based on reference imagesI usually shoot from one location during a race, so the lighting conditions are relatively consistent. However, I still have situations such as:Clouds temporarily covering the sun The sun changing position because events start early in the morning ISO changing as the available light changes Shooting runners from different directionsWhat I’d really like to know is whether Lightroom Classic has a way to define a few reference images for different lighting scenarios and automatically apply the appropriate Develop settings to similar photos.For example, imagine I’m photographing runners from
A couple of months ago, I went to open a Lightroom Classic catalog, and it appeared to crash. The first Lightroom graphic appeared, but after a few minutes, the catalog didn’t open. At first, I force-quit and tried again. That didn’t help. Then I resorted to pulling an old catalog file from Time Machine, which worked initially but later failed the same way after closing the catalog and reopening. It wasn’t always immediate. Sometimes I could close the catalog and reopen it right away, and it would work, but eventually it failed the same way again. I dug around in the Lightroom community and found many other people having similar issues, but most seemed to be using Windows 11. People said Lightroom would eventually open if you left it long enough. Several hours! I tried this and found that it was true. Whenever the catalog seemed to crash while trying to open, if I left it for hours, it would eventually open. In all of these other posts by other people with similar issues, one of the c
Hi Adobe Lightroom Classic team,I regularly shoot panoramas with the DJI Mavic 4 Pro using Free Panorama mode. In most cases, Lightroom Classic merges them perfectly, so this is not a general issue with DJI panoramas.However, I have encountered several specific panorama sets where Lightroom Classic is unable to create a panorama, while the exact same source files can be successfully stitched in other software, including Affinity Photo.From what I can see, the issue may occur more often with panoramas that contain a larger proportion of sky or less distinct detail in some parts of the frame, although I cannot say for certain that this is the cause.I would be very happy to provide the exact original image sets where Lightroom fails, together with examples of the successful stitched results from other software. This should make it possible to reproduce and investigate the issue directly.Lightroom Classic is my primary photography tool and in most cases its panorama workflow works very wel
Hi! Kind of a noob here, so please bear with me. Problem: Today, while working in Lightroom Classic, I noticed that a bunch of my photos had an exclamation point icon added to them. See the image below. When I hover over the icon, it says "Error writing metadata" (pretty scary) Clicking the icon opens the window below. When I click "Import Setting from Disk" my adjustments seem to be cleared away (not great, lol). When I click "Retry Metadata Export" that seems to fix the issue. The only problem is that there are thousands of photos that display that icon. At first, I thought the issue was isolated to photos that I had made edits on, but upon further investigation, it seems that that is not the case. Personal Investigation I'd Done: Naturally, I googled the issue but haven't found any definitive answers. In this thread, someone with a similar issue (I think) is told by @JohanElzenga that this is a non-issue, Adobe is aware and working on a
We are working in LR Classic. Students were working on drives that were formatted to match their OS–Mac Extended Journaled for those on Macs using spinning drives, APFS for those on Macs using solid state external drives, and NTFS for those working on Windows. Many students were not able to copy or move files into their LR catalog upon import on both Macs and Windows–the external hard drive was not available–and showed up as red with a warning. Many of the students were not working with card readers.The workaround we came up with was moving the photos into the desired destination folder in the finder, and then trying to import by using the “add” function. However, for several students, the “add or move” function wasn’t available and only the “copy as a dng” or “copy” were, but not to the external drive. It worked later for some of the students, I don’t know if they restarted the program or not, but this was an issue for students using both Mac and PCs. It was a full class and I was oft
If I am running Aftershoot and editing in there no prob, same with PS.. but when LR is on for more than 10 it keeps selecting my 6 MONTH OLD SSD! I changed cables, slots, etc.. reverted back one version to see if it helps. I will be super upset if LR crashes my external… I clearly need to do a backup
Title: Lightroom Classic 15.6 – Moving selected photo to another folder loses active Grid selectionThis is 100% reproducible in a brand-new catalog containing only 17 photos. Delete works correctly; Move does not. I have deliberately ruled out catalog corruption, sorting, Auto Advance, GPU, folder hierarchy, and multiple selectionEnvironmentLightroom Classic: 15.6 Operating system: Windows Lightroom Classic Library module, Grid view Local folders Problem occurs with both Capture Time and File Name sorting GPU acceleration tested both enabled and disabledProblemWhen I select a photo in Library/Grid view and drag it to another folder using the Folders panel, Lightroom removes the photo from the current Grid but does not make the next photo in sequence active.Instead, the Grid remains displayed with no active photo selected. Navigation keys/commands then behave as though there is no current selection; pressing Right Arrow or Ctrl+Right Arrow jumps to the last photo in the Grid.This is dis
my windows 11 desktop with LRC 15.6 is useless. NOT RESPONDING. Crashes no matter what-can’t open catalog. I get NOT RESPONDING NO MATTER WHAT I DO. MY LAPTOP with 15.5.` LRC still works. WHEN CAN I EXPECT A STABLE 15.6??????????????????
When you select to auto mask the sky, you can darken the sky using exposure. Sometimes the sky is still blown out. A quick “auto fill” sky button would be amazing. AI would use the same sky color that is available elsewhere in the photo, or, you could set the color using a color selector- or just tell it “daytime” or “sunset”. It would work for blown out skies out windows as well for indoor shots. You can get this effect using other features, but this would make it fast and easy in Lightroom. When pulling exposure down on the sky on a JPG image, sometimes you get bars of choppy color gradient. There could be a “auto smooth” sky option to make the sky and fix the choppy bar gradient.
I just upgraded to the latest version of Lightroom. Now I cannot see or access any of the photos in my catalog. When the catalog is loaded on LR Classic it says there are “0” photos.
A too large number of files imported into LRc are grey-ed out with the message that preview could not be created .A significant number of them are of images of documents. So, I considered that as a source of the problem,but I have plenty of other documents imported into LR and the preveiw process worked as advertised.I tried importing just the problem images (the previous import were part of a bunch of images importedat the sae time. Still could not get previews. I tried forcing the ffiles to convert using "Build Previews" No luck there. Could not find a solution in the posts. I did not start deleting catalogs and then re-importing the files as someone on another post suggested (!?) Do you have anything to suggest I should consider doing to correct this?I am running an Apple M3 with whatever is the latest and greatest OS. All images are Tiff.Thanks in advance for any help you can spare.
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.