Questions

Upgraded LRC today along with a new catalog. MacBook Pro, Sonoma 14.5 Uploaded images from card as usual, flagged my keepers and opened them in Develop to see this screen.I don't even know what to call it, but it's covered in raggedy color bars.

I am using the latest version of Lightroom Classic and I am importing 21 photos from a Nikon Zfc camera. Lightroom will import 15 of the photos with no issues but 6 photos are not copied and I receive this error message - "photos will not be renamed as they are missing or not writeable".  You cannot later go and rename them as the 6 files are not actually there. I do see a preview. but that's all. The 15 that were imported can be renamed and edited I have tried two card readers and I have the same problem. I even copied the files to the desktop and imported them to Lightroom but I still have the problem.  I can view and edit all the files in Nikon NX Studio. I have tried SD two SDHX cards - San Disk Extreme Pro and Lexar Professional. All the same problem. I have other Nikon cameras such as a Nikon Z8 and I have no problems importing and renaming photos. So, the problem is specific to the Nikon Zfc files. Lightroom Queen Forum response has been to suggest that

Bonsoir,Je viens de changer de pc et résinstaller PS et LR, je n'arrive pas à remettre LR dans ma barre des tâches, comment faire ?Merci d'avance.

I cannot get out of full screen mode and resize the LR window so it takes up only part of the screen.If I move the cursor to the top, the normal menu bar (Apple Lightroom File .... ) appears, but it does not have the red / green normal buttons for resizing the window.Meanwhile, Window > Screen Mode shows "Normal" checked.Escape key, restart of LR, or even reboot do not change a thing. I had the same problem with an earlier version of LR. Upon upgrading to the latest version, the problem was fixed for a while, but it reappeared again. I am running LR Classic 8.2 on Mac OS 10.14. Thanks!

Hallo!Nachdem ich meine komplette Fotosammlung in LrC migriert habe, fällt mir folgende Besonderheit im Zusammenhang mit Vorschauen auf. Bis vor kurzem wusste ich nichts von Standard-Vorschauen und eingebetteten Vorschauen usw. - in der Zwischenzeit habe ich mich aber ein bisschen schlau gemacht.Bei allen Fotos als JPG (iPhone's, DJI, usw.) sowie bei allen NEF's meiner diversen Nikon Kameras entsprechen die Vorschauen dem in den Kameras eingestellten Bildformat bzw. Sensor (2:3, 16:9) - kein Hinweis auf "eingebettete Vorschauen".Bei allen RAW's meiner Panasonic GX-80 finde ich den Hinweis "eingebettete Vorschau". Die Vorschau hat das Format 2:3 und ist in schlechter Qualität. Wenn ich nun in LrC eine "Standard-Vorschau" erstelle, verbessert sich natürlich die Qualität der Vorschau - allerdings im Format 16:9. Auch wenn ich in die Einzelansicht oder in den Entwicklungsmodus wechsle, bleibt das Bild 16:9 und es fehlen mir einige Bildbereiche, die in der "eingebetteten Vorschau" noch sich

Hi,I am trying to locate some photos from a 2015 Grand Canyon trip that are in my Lightroom Classic Catalog. I know they are there or at least Lightroom believes they are there because I can't import them for this reason. However I am unable to find them anywhere in the Catalog. I have searched by Keywords, and by Date, with no luck. More interesting is that the folder is also nowhere to be seen on the left hand side. I can see the external harddrive they're on, but the folder titled "Grand Canyon 2015" is just missing not grayed out but completely gone, therefore I can not Sync the folder. I also can't add the folder because it belives it to already be there. If anyone can lend some light on this issue and maybe some possible solutions I would be greatful.

BonjourJ'aimerais qu'il y ai un lien entre une de mes collection dynamique de LRC à LR. J'ai vu sur internet qu'il y avait une option à cocher lors de la créaction de la collection "Synchroniser avec lightroom" malheureusement je n'ai pas cette option.Avez vous une solution ?Ça me permetterais d'avoir mon book constement à jour sur mes appareil mobile, ce serait chouette. Merci 🙂

All Photos in the Catalog have an exclamation symbol without the pictures/Images I have 2766 images and when I updated my backup H/D I must have hit something in error.At 81 years old it is not hard for me to make a computer mistake, LLOLI tried to use the backup which is 2 weeks old, that did not work and even a previous B/P one.I have all the pictures on my computer in a folder called Lightroom in pictures, I believe that is generrated by LR, it has all the NEF and xmp files to the photos.I also have other Tiff and jPeg files as well in the catalog.The folders also now have question marks.If I click on the exclamation point it asked to locate the file, having 2700+ images there should be a way to get them all changed at one time, doing one at a time would take a very long time with the hope that I would get them all.I 

I have 4000+ photos on my iPhone. I am trying to import a few hundred at a time into Lightroom Classic.I always used to be able to select a group of consecutive photos together but over the past few days the batch select doesn't work.I have to Uncheck All and then check one photo at a time to select for Import!!!What is wrong that I can't select multiple images at once? How to fix/get around this?I just upgraded my Lightroom Classic catalog to 13-4.Mac Mini with Sonoma 14.4.1

I use several apps with LrC, three of which are from Topaz AI.  Two work fine and are in the menu Photo>Edit In> {App name}. But when I follow this path, one is  missing from the menu, Topaz AI DeNoise. I tried to add it with the LrC plugin manager, but Topaz AI DeNoise is GRAYED OUT. Please advise how I can add it to LrC.   BTW, I am using an iMac with the latest OS. LrC is release 13.4

I hadn't been on Lightroom classic for over a week. I uploaded several photos from my phone to the cloud and they instantly synced to the cloud and also with Classic. I then tried to sync 17 photos from Classic to the cloud. I started last night and the blue sync button just keeps going round and round and round. After an hour last night I switched it of and resumed this morning and it's being going for another hour and still 17 photos to sync. Just as a test I uploaded another photo from my phone to the cloud and that instantly synced with classic.So the problem is Classic to the cloud. Now I say "up to its old tricks" because I have noticed this same behaviour in the past. Whenever I have gone for a significant period of not using Lightroom the first syncs take forever. It's as if I have been put at the back of the syncing queue.

Cant save or print  a photo I have added masks too.  LRC saves and prints the orginal pic w/o the masks.  Any ideas on what I am missing would be appreciated.

I tried resetting preferences and I can't get it to open at all. I used it a week ago and uploaded some new photos that I didn't edit with no issues and today I can't get it to open.

Після оновлення Лайтрум зникли всі налаштування і пресети. Як це виправити? Чи можна повернутись до попередньої версії? дуже потрібно повернути свої пресети!

Hi all hope you can help , i use Nikon Snapbridge which in turn uploads to apple photos from there i use lightroom ipad to select images to upload to Lightroom classic on the i mac . They have always been done in the order they were capture but of late they have uploaded with images taken previously going back 12 months if anyone can offer any advice i would be grateful. All devices are running the latest versions 

I have noticed issues when exporting large amount of files (4000 images+)At the beginning export speed is quite okay (lightroom was never fast at export)After some time (1000 - 1500 images) the performance degredates to a point exporting one file takes 20-30s.Closing lightroom, reopening and restart export fixes that problem temporally.Issue is reproducable on different machines.Lightroom Classic-Version: 13.4 [ 202406181129-60d181b7 ]Lizenz: Creative CloudSpracheinstellung: deBetriebssystem: Windows 10 - Home Premium EditionVersion: 10.0.19045Anwendungsarchitektur: x64Systemarchitektur: x64Anzahl logischer Prozessoren: 16Prozessorgeschwindigkeit: 3.6GHzSQLite-Version: 3.36.0CPU-Auslastung: 44.0%Stromquelle: Angeschlossen, 255% Integrierter Speicher: 65448.1 MBDedizierter GPU-Speicher, der von Lightroom verwendet wird: 11339.3MB / 16050.0MB (70%)Für Lightroom verfügbarer phys. Speicher: 65448.1 MBVon Lightroom verwendeter phys. Speicher: 10815.3 MB (16.5%)Von Lightroom verwendeter

Bonsjour,J'utilise 2 catalogues Lightroom Classic. Un catalogue a la synchronisation Cloud activée, tout est OK.Pour l'autre catalogue, je ne veux pas de synchronisation Cloud. Or, depuis quelques jours, à chaque fois que j'utilise ce catalogue, Lr me signale au démarrage que je ne peux synchroniser qu'un seul catalogue et bloque mon démarrage avec un message que je ne voudrais plus voir.... : "Voulez-vous synchroniser ce catalogue à la place ?"Et je suis renvoyé vers l'onglet de paramétrage "Lightroom Synchronisation", dans et avec lequel je ne trouve pas comment "NE PAS SYNCHRONISER" !!!Comment paramétrer Lr Classic 13.3 pour "NE PAS SYNCHRONISER TEL CATALOGUE" ?Merci pour votre aide.Marc 

Despues de actualizar Lightroom Clasic no tengo nada en biblioteca. < NO hay imagenes

Hello, I have imported a couple hunderd pictures in LRC. But some photo's are not showing up. If i Sync the folder he said there are couple new photo's. But while sync he said no new photo's. I have already tryd the search, unstack, but no resolts. I cant also try to inport them again because he said is already imported.... 

All Photos in the Catalog have an exclamation symbol without the pictures/Images I have 2766 images and when I updated my backup H/D I must have hit something in error.At 81 years old it is not hard for me to make a computer mistake, LLOLI tried to use the backup which is 2 weeks old, that did not work and even a previous B/P one.I have all the pictures on my computer in a folder called Lightroom in pictures, I believe that is generrated by LR, it has all the NEF and xmp files to the photos.I also have other Tiff and jPeg files as well in the catalog.The folders also now have question marks.Thanks in advance,GregIf I click on the exclamation point it asked to locate the file, having 2700+ images there should be a way to get them all changed at one time, doing one at a time would take a very long time with the hope that I would get them all.I 

I'm finally retiring my old iMac that was running LR4, the iMac had a 2TB hardrive with all of the SLR raw files and LR catalugue file.  With the new iMac mini is only has a 500GB SSD.  What would be the best way to setup a new version of LR on the new iMac mini?  Would I need to connect an external 2TB HDD (USB3/netword drive) with all the raw files on that and have the LR catalgue on the iMac min native HDD?    Once a new LR version is all setup on the new iMac mini, how easy is it to point all of the the catalogue folders on the iMac to the new HDD locations?  Would I need to do this for each individual folder?  Any advice greatly appreciated, thanks.

LR Classic, v13-3, Windows 10.  I don't want LR to open when I insert an sd card.  The box in Preferences is already unchecked but it still opens.   [moved from bugs to discussions according to the community rules - Mod.]

Ich kann Fotos exportieren, das funktioniert. Jedoch bleibt die Vorganganzeige oben links in Lightroom hängen resp. schliesst nicht vollständig ab. Beim Schliessen von LR erhalte ich die Meldung "Es werden ... Aufgaben ausgeführt". Man kann diese Meldung überspringen, jedoch weiss ich nicht, ob dies eine negative Auswirkung hat.

Hallo,Bin einen neuen LRC User aus Luxemburg.Da wir hier sowohl die Deutsche wie die Französische Sprache benutzen, bediene ich meinen PC mit eine D/CH - Tastatur.LRC ist auf Französisch, könnte aber auch auf Deutsch umgestellt werden.Ich suche wie ich den Shortcut für "Vorher" auf meine Tastatur benutzen kann. Der ist laut Tabelle "\". Jedoch muss ich auf meine Tastatur dafür "CTRL+ALT+<" zusammen drücken für auf das Sonderzeichen zu kommen.Das scheint aber auf LRC nicht zu funktionnieren?Kennt Ihr eine Lösung?Mir ist bekannt dass mann mit "Y" auch auf "Vorher/Nachher" schalten kann, aber mir würde nur die "Vorher" Anzeige interessieren.Vielen Dank für eurer Hilfe,Max