Questions

I keep getting a run time error, GPU accelerator has been reverted to Limited for the rest of the session while editing in "Camera Raw" in Photoshop 2025 and Beta  My Laptop : ASUS Zenbook DuoGraphics card : Intel(R) Arc(TM) 140T GPU (16GB)Processor : Intel(R) Core(TM) Ultra 9 285H (2.90 GHz)Installed RAM 32.0 GB (31.4 GB usable)System type 64-bit operating system, x64-based processor *Ps. My graphic driver and windows updated  

Hello, when I click on R to rotate my workspace, a “prohibited” icon appears and a message tells me “unable to update dynamic objects because this option is only compatible with Open GL document windows.” I don't understand what this means and why I can't just rotate my workspace, as I draw better when it's tilted. Thank you in advance for your help!

several of my .psd files have been corrupted recently and will not open. get error " this file is not compatible with this version of photoshop"tried rebooting, reinstalling, using older version, using illustrator, using other programs. all say file is corrupted.technical supports looked at it and said it was corrupt and suggested re-doing it. Which is highly frustrating since I've spent hours on work that is lost and no reassusance it wont do it again since this is the 3rd time in the last few days that its happened. 

Boa tarde, comunidade!O órgão onde trabalho possui licença do Photoshop CS 5 e Master Collection CS 5.5, porém já baixei alguns instaladores, mas eles informam que o serial não é válido. No site da Adobe, só é possível baixar o software por meio de uma conta cadastrada. No entanto, este é outro problema, pois não encontramos tais informações. Sendo assim, espero poder encontrar aqui uma solução para este caso.Grato desde já.

I've been using PS 2018 on my Mac with OS 10.13.6 for years and today it requires me to sign in.I get through the Adobe Account sign in and reach the profile options, but the verified subcriber account will not open and I am unable to use PS.Has anyone experienced this? Adobe support could not help.

Lorsque je veux copier coller, ou même glisser, ou même importer et incorper une image sur photoshop, ce n'est pas possible et j'ai ce message : "Impossible d'effectuer cette opération en raison d'une erreur du programme" J'ai tout essayé, Pouvez vous m'aider svp ? 

Seit dem letzten Update von Photoshop auf 26.10.0 (Studio Mac) kann ich das „Entfernen-Werkzeug“ (mal wieder) nicht mehr verwenden. Auf dem Bild erscheint ein „Verboten“-Cursor. Ich habe bereits nach dem Problem gesucht und die Tipps befolgt:- Beta-Version deinstalliert- PS 26.10.0 deinstalliert und als einziges PS neu installiert- Gerarive KI an / aus- Guthaben für genarive KI ist ausreichgend vorhandenDie Dateien sind normale JPGs, RGB, keine gesperrten Ebenen oder Einstellungsebenen usw.Das Problem tritt exakt genauso auf meinem Laptop auf. Ich hatte das schon einmal, aber es hat sich dann irgendwann von selbst gelöst. Woran kann das liegen?

I REALLY need your help. I have a Selection Brush Tool bug - When you paint over an existing layer with "Add" enabled it subtracts... I have made a screen recording here https://youtu.be/aaFKwjiX8d8 Can ANYONE please help me figure out what's wrong... Thanks!

So, I'm using PS 26.10.1, and when I try to use the Liquify filter after the first stroke, the window closes and the modifications are applied. Has anyone seen this problem? Turned off gpu tried resetting settings. Nothing! What am i missing?

Hello,I am currently using the latest version of Adobe Photoshop (v26.9), but I am unable to access some of the newly introduced features. For example, the “Harmonize” option (Color Harmonization) does not appear in the Properties panel when it should.In addition, when I update the integrated Camera RAW plugin to version 17.5, the Camera RAW module fails to launch entirely.Could you please advise on possible causes or solutions for these issues? Any guidance would be greatly appreciated.Thank you in advance.

Hi,I am setting up a business, aiming to do scanning of artwork, photos etc at clients homes. One of my scanners is a Fujitsu SV600 overhead scanner.  I can get good results from the scanner using an advanced ICC profile, with Levels. The trouble is that the scanner picks up every last crease and imperfection in the paper on artwork and on some non-white paper scans the colours come out blotchy. I have a Spectro 1 Pro spectrophotometer to get exact results on the background colour (in conjunction with a Hue/Saturation layer or Replace Color command) but in using these techniques, the colours remain blotchy. What i want to do is unify the blotchy colours with a single new colour (as proposed by the spectrophotometer on the original artwork) without upsetting any of the detail in the artwork (drawing, painted subject). I have found using Gaussian blur and the clone tool to be too invasive of the artwork. I wondered if the high pass filter could be utilised or ideally

I have 2025 Photoshop (25.0), and I wanted to change a photo from day to night. Everywhere I look, the tutorials tell me to do layer adjustment > color look-up.. My version doesn't have color look-up. I also went into my Adobe presets and it doesn't have a LUTs folder. The internet tells me to add one. I tried that with pasting .cube doc (with a few free lut packages I found) and it has no effect... I restart the program and nothing. I don't know what I am doing wrong or why my version doesn't even have an option to do color lookup... Help! Diepretty

Hi,  On windows, when I start a brush stroke the stroke doesn't appear immediately. For example, if I hold still the pen on the screen it makes a mark only when I release the pen. If I make a stroke, it appears only when I'm few millimetres away from the starting point. That's very muddled but annoying, and it only happens in Photoshop. You can see it in the attached video.  I'm drawing on tablets and I have this issue with both of my tablets (Huion and Wacom), I'm on windows 11 and I tried on a Windows 10 too.  -> I'm up to date with Photoshop(23.1)      -> But it happens on previous version too. -> already tried to reset preferences -> already tried to disable windows ink (In table settings, and with the user setting files)  Any help ?

 Ways to remove the old version completely,while having the latest version of Photoshop.

Cuando acerco y alejo la imagen esta se multiplica ¿Alguien sabe la respuesta?   

Desde ayer cuando quiero guardar una foto en guardar para web, en mi carpeta no me aparece la foto. Pero luego cuando hago el proceso de exportarla aparece que está ahí y me pregunta si quiero reemplazarla, pero luego en mis archivos no está la foto. Probé a reinstalarlo, pero no ha servido, intente contactar con el soporte técnico y es imposible poder comunicarse con ellos. 

Can anybody help me achieve a colour match between Photoshop & Illustrator please? I have synced colour settings via Bridge, checked matching colour profiles in both programmes, checking both using CYMK and used the same colour hexcode. The colours are still miles apart. Please see attached screenshot for reference. Any help would be appreciated!  

I was editing an image in Lightroom, and needed to do some quick clean up. So I used the "import to Photoshop" feature in order to do this. I made one copy of the file, and then a new layer. I used various heal tools on the new layer. Nothing exotic on the healing, just removing dust spots. When done with the healing, I made a consolidated stamp layer (al+ctrl+shift+E). I then closed the document to import back into Lightroom. I sat and waited for the image to upload to the cloud so I could edit it. After 2 hours, it still hadn't uploaded. So I just left my computer on and went home. Several hours later, it finally updated. At home, I tried to finish the editing the image in Lightroom mobile, and then export. After pressing the export button, I again waited over 2 hours for the image to download so it could be exported. I simply gave up after 2.5 hours, and just made the changes in Lightroom.I am now looking at the file in my Lightroom library, and it is 1.15gb. This is massive. The fi

I have searched on this forum for months but no luck.  My photoshop and lightroom classic has been working fine on my laptop, but with my stationary computer it just flickers slightly in all menues and runs incredibly slow until it crashes. I have tried to re install, turn off processor and increase catche. All of these have helped slightly but the main problem remains. No issues with any other adobe programs.  Windows 11Lightroom Classic V.14.3  

I work as a product photographer and often receive product images from various suppliers. I’m looking to build an automated workflow using Photoshop actions that can do the following:Remove backgrounds and shadowsScale the product so that its longest side sits exactly 50 pixels away from the edge of the canvasHere's the workflow I have in mind:Use Image Processor (or Batch) in Photoshop to trigger an action that:Removes the background and shadowsResizes the product proportionally so that the longest side (width or height) is exactly 50px from the canvas edgeThen, automatically export the image using “Save for Web (Legacy)” with the following export settings:JPEG quality: 65%Image size: 1500 × 1500 px The incoming product images vary in size and aspect ratio, so the scaling step must dynamically detect the longest edge (width or height) and resize the product accordingly. Ideally, everything should be handled inside a single automated batch process with minimal manual steps.

In Photoshop 26 ver, the function of holding down Alt to use the color picker is still slow. Updating both the graphics driver and Wacom driver to the latest versions has slightly improved the speed, but it is still too slow to work comfortably.  It still stutters and lags, with random dots appearing during operation and the color picker not working properly. 

As per the topic - Is there a way to apply an adjustment layer to multiple 'linked' layers spread at various parts in the stack, rather than(adjacent) 'grouped' layers?

I am using  Photoshop CC Starting yesterday when I use the perpective crop tool and press enter the screen goes black. The regular crop tool works fine This occurs even if I don;t do any croppingThanks for the assistanceRoger Lieberman{Personal information removed by moderator}

"I'm using the Generative Fill feature in Photoshop, but I don't see the 'Harmonize' option. Could you please guide me on how to enable it or let me know why it might be missing?"

Hello Adobe Photoshop Team,I would like to suggest an improvement for Photoshop’s Layer Style functionality, specifically regarding Gradient Overlay applied to Groups.Current BehaviorWhen a Gradient Overlay is applied to a Group, Photoshop treats the Group as a single flattened layer. As a result, the gradient is rendered based on the Group’s bounding box (canvas coordinates), rather than each individual object inside the Group.ProblemThis makes it difficult to achieve consistent results when working with multiple objects. If I resize or move objects inside the Group, the Gradient Overlay does not adapt to each object’s boundaries. Designers who want object-based gradients across multiple layers need to duplicate Layer Styles manually for each layer, which is inefficient.Suggested ImprovementIntroduce an option for “Per-Object Gradient Overlay in Groups”.When enabled, the Gradient Overlay would be calculated relative to each object’s boundaries within the Group.This would allow designe