Questions

Hi, I experienced this 3 times today and as a consequence had to shut down Photoshop using task manager each time, losing my unsaved work by doing so… I’m not sure if this is related exclusively to the last update but on Photoshop 27.7, the software freezes when i try to drag a layer from one file to another. I experienced that with a 600 ppp resolution if it helps.

thank you 

Hello. This message starts to pop up now with using GenAI tool (Photoshop beta and 26.7.0, both version) "You don't have enough credits for this generative action. Upgrade your Firefly plan now to get more credits for continued access or wait until your monthly reset."I have the annual subscription (renewed several days ago) and 250 credits included into this plan. Usually when all credits are gone, GenAI just continue to work slower, but there wasn't any block to use this tool. Are there any new rules/tariff changes for using this tool?

Recently I have found out some color differences between Win 11 and macOS 26 and I dont know what's wrong. Not sure, but I would say it was OK some time ago.Both systems use same updated PS 27.7. Both of them use EIZO CG with absolutely same calibration setup.Color settings in PS is also same.So I would expect very similar look of images. But on macOS images are displayed much more saturated, then on Win11. It means when I start editing on Win11, it is very hard to continue on macOS. Do you have anyone any idea, what could be reason?

I simply  cant click on any on the tools like text or paint brush 

Trying to save out some images from a slice with the export for web function but the software seems to be spitting out GIFs all the time. I've tried outputting JPEG and PNG but the export function will only give me GIF format files. Is anyone else having this issue? Edit: To be more clear, when I select JPEG it exports the images, but the file types are GIF instead of JPEG. This is the same for PNG.

I finally trusted myself enough to pause my older computer’s installation of PS CS5 and successfully installed CS5 to my newest, much faster computer. Several questions and one issue.First the issue,  although the program responds and downloads the updates found under Help/Updates it will not install them. It appears to try but fails. A screen shot is attached.Failed AttemptI’m at a loss to understand what I need to do now. On another note I’d really like to increase the display of the menu on top and the side panel actions if possible.Thanks for any assist.

When you mask a group, then unlink a group from the mask and moving this group around on the canvas, the content in the mask is not refreshing, you have to “shake it” to force it to refresh.can you please fix that?

In every version of Photoshop I’ve used since Save for Web was introduced, you’ve been able to use the eye dropper tool to select a color in the Color Table (visible for GIF and PNG-8 formats), allowing you to locate, lock / unlock colors, etc.This no longer works.I’m using version 27.7.0 on Mac.

Do I need to register my Photoshop Extended CS6 or just carry on using it as is? it is a perpetual EULA but want to make sure I can continue using when they discontinue it

Dear Adobe Support Team,My name is Kamal Abdel Nasser, and I’m passionate about video editing and digital design. I truly love Adobe products — especially Photoshop, Premiere Pro, and After Effects — and I’m working hard to make video editing my future career. Unfortunately, my current laptop cannot run the latest versions of these applications due to limited hardware specifications. I would really appreciate if you could guide me on how to legally access or subscribe to older versions (such as 2017 or earlier) from official or trusted sources. I’m willing to pay a monthly subscription for these older versions, as buying a new high-end laptop is not affordable for me right now. Thank you very much for your time and understanding. I’m looking forward to your kind support and advice.

All these years of using Photoshop and I don't ever recall having this problem before? But when I go 'File / Export As / jpeg' it converts the image to RGB when exporting it. I understand I can instead use 'Save As', but jpeg isn't listed unless I flatten the file first. It just seems messy to have to flatten everything, then save it, and then undo the flattenning so that i dpn't accidentally overwrite the file. Surely there is a better way?

The image here is not from my pc, I found it online to help illustrate my problem.I do not know Photoshop well at all, I have only recently begun to use it, so I am a beginner. My problem is that eventhough I have turned off auto-save shown above, it still automatically saves the file I am working on. Perhaps every 15 minutes or so. It slows down my pc tremendously. I want to turn off auto-save. I thought I had, but it still on. I searched online for how to turn off the auto-save and did that and have not changed any other settings. I checked earlier today and the auto-save box is not checked. What is wrong? Only yesterday I finally found out how to upload a file to the Cloud and did it with this very large file that I am working on. It is currently 10GB.  Before I did that I saved it and opened it on my pc, which is older, and may not be powerful enough for PS, but it has the minimum specifications needed for it. When I worked on the file which I have on the pc, it was slow, but not a

está demasiado lento, no pasa de 93% las generaciones, se demora y se cae la página constantemente, duro editando una sola foto todo el día. no es la Ram, no es la memoria, no es el navegador, ya hice todo lo posible y no eh podido trabajar ya hace dias. 

Photoshop and other applications from my plan cannot find an internet connection. They cannot be verified and give an error, first 12015 and then 102. After that, the application closes. The Internet is available, the subscription is paid. I have a windows 11 64x 

Hello,I have:M1 Pro Macbook Pro, 16 gb ramI have a file that I can't export it PDF because of an error. I have read on the internet that I should uncheck the " use graphic procesor" before I should try export it PDF. I tried it and it didn't work.When I unchecked the graphic procesor the images went FADED as if I worked in cmyk ( or when you hit "cmd+Y " ) After that I checked the ' use graphic procesor ' as it was before and restarted the PS.PRobleem is here: The images are still FADED with the processor toggled on and I don't know what to do.After a few restarts now i'm in a complet mess. The photos are faded when the procesor is on and normal when the procesor is off. Before that it was the other way around.I need to have my procesor on because of the performance and I don t know what do to.One thing: If i m exporting the photo, the colors are normal.I have:- Reinstalled PS- Update MACOS- Open the PS with CMD SHIFT CONTROL- Delete cachUPDATE 1: From what i m seeing it's like photosh

getting this type of codes during tutorials such as select 2201 and now chose 1042 

Starting with 400x400 image size, with 40 pt text layer. 2 letters, kerned at 5.Wanting to create the same text layer with the same kerning at various larger sizes. For example: 500x500 image size with 50 pt text layer, 1500x1500 image size with 150 pt text layer etc.Simply typing the larger text layer in the larger image size can produce different kerning positions. Normally one px difference.To confirm what the new size should be regarding the correct kerning, I have tried every way of testing I can find using upscaling techniques and they can all give different results. It also changes depending on what size I start with to upscale.Increasing image size Increasing image size with Scale Styles  Duplicating the layer, sending it to the new canvas and increasing the font pt Converting to smart object, opening text layer as .psb and then increasing font pt Free transform as a shape and smart object Free transform as live text (this can produce kerning differences within dead zones)If I

this won’t allow my words

Hi ,Sorry, I selected the wrong category. To clarify, the device is computer.I’m using the Brush tool in Photoshop on the web with a Wacom pen tablet. When I draw with the Wacom pen, I often get the following warning, as shown in the attached screenshot:This seems to happen when the pen is touching  surface for an extended period of time while using the Brush tool.I have already tried the following:Set the Wacom pen side button / side switch to No Action Disabled Press and Hold for right-clicking in Windows Control Panel > Pen and TouchHowever, the same issue still keeps happening.Is there any way to prevent this warning from appearing, or is there a known fix or workaround for this issue?Thank you.

I am modifying this mirror frame image. With the application of a mask it will be shown in different contexts / colour ways. The NEF image was opened as a Smart Object via Camera Raw.I need to make a few changes to the photo ie: removal of the fine casurina needles (leaves) etc.Is there a non-destructive or destructive way retouching which updates with the Smart Object?I think I have exhausted all options. Hopefully a photoshop fairy will appear!Thank you    

The move tool is no longer an arrow. It looks like a paint tool. 

Photoshop is running very slow for the last few days when it was running perfect before. I have used the program on different computers, so it is not the computer. 

Hi, I am working with LR 14.2 and PS 26.3 on Mac Mini M4 with Sequoia 15.3.1.LR preferences are set to use PS as external TIFF 8bit image editor with Adobe RGB 1998 color profile (same profile is set in PS).I import a RAW image into Lightroom, apply a user preset, export to photoshop, make some changes, save as TIFF and close. Returning to LR I find the TIFF image with a develop adjustment applied.I have noticed that sometimes is the same preset of the RAW image, sometimes there is just the small develop icon in the bottom right corner of the thumbnail which seems no changes has been applied.Is it possible to prevent LR from applying any sort of develop adjustment?

It’s been a while since setting up a new install of Photoshop and having trouble remembering how to change this, and hoping someone can point it out as searching isn’t coming up with anything. I want to allow editing of a mask off the canvas edge, such as using a brush or selection fill. For example this vector shape with a glow effect goes outside the canvas area, and I want to mask it using a selection. Currently the selection only affects inside the canvas area, allowing the bits of vector shape outside the canvas to still be there and produce a glow effect.