Questions

So, I have quite a few LUTs installed on my PP25.About 200 I believe, so not above the limit.But when trying to decide which to use, I come across the problem that after about 100 LUTs or so it keeps skipping back to that "100th" LUT, can't pick another after that one. Don't know how to properly explain it, so I made a quick video showing my problem.It also doesn't happen with every project, just every once in a while... https://www.youtube.com/watch?v=tvIRxN8KZs8&feature=youtu.be

I am working on a project for work.  To do this, I have shot my B-roll and some of my testimonies.  Then I download them on my home computer from my HDVCs, iPhone, DJI wireless microphone, and then I copy them to my Google Drive.  This way, when I get to work, I can download all those files, and add them to my project.  However, after downloading them to my work laptop, I create the project and start to import all of my files.  As I was trying to sync up the video files from 3 cameras (2 Sony HDVCs and my iPhone), I noticed something as odd.  NONE of the MTS files have audio files...they are just the videos.  Which without the audio makes it IMPOSSIBLE to sync the three files.  This is what they look like after importing them into PP:NO AUDIO FILES!!!So I went to Google and tried searching for issues.  I guess since Sony and Adobe don't always play nice, one of the solutions was to convert them to H.264 using the Adobe Media Encoder.  S

Звук импортируется, но остаётся пустой аудиодоржкой.Я записывал видео в OBS Studio в формате mp4 , в нем используется новая технология раздельной записи звука по дорожкам. Не отдельный файл для записи звука с игры отдельный файл для записи экрана и ещё отдельный файл для записи звука с микрофона. Нет это не про это, а в том же самом файле несколько аудиодорожек разделённые на окна с  игры и т.п.Я проверил и сделал всё что мог в моих силах, герцовка звука совпадает с кодираванием её  в  Премьере. Создавал несколько каналов. И всё равно ничего не помогло.       

Hi! I got the error "Encoder failure" when I tryied consolidate sequence. Perhaps this solution useful to someone. Premiere persistently gave me a mistake "Encoder failure". He did not give any description of why the error occurred. First I used the next options for projectManager.  pmo.clipTranscoderOption = pmo.CLIP_TRANSCODE_MATCH_SEQUENCE;pmo.clipTransferOption = pmo.CLIP_TRANSFER_TRANSCODE;pmo.handleFrameCount = -1;pmo.convertSyntheticsToClips = false;pmo.convertAECompsToClips = false;pmo.copyToPreventAlphaLoss = false;pmo.includeConformedAudio = false;pmo.includePreviews = false;pmo.excludeUnused = false;pmo.renameMedia = false;pmo.includeAllSequences = false;pmo.affectedSequences = [sequence];pmo.destinationPath = consolidatedResoucesPath; The problem was that the options includePreviews and includeConformedAudio needed to be set in true, when clipTransferOption is CLIP_TRANSFER_TRANSCODE.

  Your Creative Cloud membership is a gateway to world-class tools and a passport to exclusive opportunities. This June, tap into the full potential of your membership with Partner Perks that unlock premium resources, career opportunities, and community connections for creatives like you.    LinkedIn Premium Career Grow your creative business and find new work opportunities with LinkedIn Premium Career—free for three months. Whether you're freelancing or hunting for your next big role, LinkedIn Premium's advanced insights, InMail capabilities, and enhanced profile visibility give you the competitive advantage needed in today's dynamic creative landscape. The numbers speak volumes: Premium members are 2.6x more likely to get hired on average.    Redeem now     Adobe Career Center Newly launched in April, the Adobe Career Center helps you showcase your creativity, reach more people, and earn more—all in one place

When shifting clips down the timeline, audio transition (constant power crossfade) disappears. Upon undoing the action, transition returns, but not as originally set up. Please see attached screen recording. Model Name: MacBook Pro  Model Identifier: MacBookPro18,2  Model Number: Z14X000HRLL/A  Chip: Apple M1 Max  Total Number of Cores: 10 (8 performance and 2 efficiency)  Memory: 64 GB MacOS Sonoma 14.5 Footage: Multicam: 3 Cameras - 8k Canon Cinema Raw / 4k MXFMXF File details: Wrapper type: MXF OP1a (type: SingleItem SinglePackage MultiTrack Stream Internal) File generated by: CANON, EOS C70 (1.00) Bitstream Format: Sony AVC Long GOP High 4:2:2 Profile 10-bit Unconstrained CodingSource Audio Format: 48000 Hz - 24-bit - 4 ChannelsProject Audio Format: 48000 Hz - 32 bit floating point - 4 Channels

When changing windows with 'alt+tab' premiere will move the playhead a couple of frames each time. 

when I put in a video thats only about 10 minutes long, it basically stops my premiere pro and I cant watch the clip. Not sure if it fixes after a certain amount of time, but to fix it so far ive just kept minimizing and it sometimes works but most of the time doesnt. My Pc is good and runs every perfectly fine (including other video  softwares) After a little while, it fixes itself but I would love to be able to just not have this issue at all.

I'm working on an Adobe Premiere project and trying to use the "Edit Clip in adobe audition" option for an audio clip, but it's not working. when I click on it, the loading bar pops up, but disappears almost instantly, and nothing happens. It doesn't even create an extracted file. I'm using the 25.2.3 version of premiere, and the 25.2 version of audition. But even the earlier versions of either apps didn't work.  Any solutions?

Despite having 64GB RAM, an RTX 1070, and Ryzen 7 5800X, and using ProRes/DNxHR proxies for 1080p footage. I am making a gamedev video 10min long using footage of 80 hours development.I experience 4-10 second playback and pause/unpause delays (sometimes I have to wait up to 30sec for premier to pause or unpause), and system resource monitors show minimal CPU, GPU, and RAM usage during these freezes.I have tried clearing cache, updating drivers (Studio drivers), and ensuring GPU acceleration is enabled, yet live preview remains unresponsive.

Auf der Suche nach dem Effekt "Median" zum Entrauschen bin ich auf folgendes Probleme gestoßen. Dieser und auch einige andere Effekte fehlen. Die meisten sind jedoch vorhanden und funktionieren tadellos. Im Videoeffekte-Manger wird kein einziger Effekt angezeigt, obwohl viele vorhanden sind. Der Filter "Median" wird in der Adobe-Hilfe nach wie vor beschrieben und ist nicht als veraltet gekennzeichnet. 

Hello. I am still learning premier and had a question. I have an interview involving two speakers, and I was hoping to find a way to make it more dynamic by zooming in when a specific speaker is talking. I guess like a jump cut. Is there an easy way to do this or is it going to be a lot of manually adjusting the zooms? Any Ideas or feedback would be welcomed. 

Estou tento um problema com a janela de Atalhos do Premiere Pro.Eu quero designar a tecla ENTER como atalho para "Renderizar da entrada para a saída" Mas o programa não permite designar a tecla "ENTER" pois assim que clico nela, a janela entende como "OK" e fecha.   

I edit a lot of music videos and so I usually stack clips on video channels after syncing them with the music and then cut the best pieces of each one to build the timeline.  I often used to leave multiple videos stacked on top of one another even though only the top clip is visible in playback. A long time ago I realized playback speed is effected by this. I'm assuming it is trying to playback all the stacked clips at the same time even though only the top clip is visible. Now I always clean up my timelines to keep videos from getting left in the lower video channels, but I am curious and havent found an answer yet on whether or not this effects export speeds. If two videos are stacked in V1 and V2 but only the clip in V2 is visible, will premiere be attemping to encode both of them in an export slowing down the export speed?

Is there a way to reverse image search footage from an exported QuickTime to the source? Need to rebuild an assembly.

Does anyone has a solution for the import of the 360 degree footage from my insta 360 camera? Since the new update I am unable to import my .insv footage into Premiere and also all my old projects are not working anymore. Its quit a problem, since I have to redo everything. Is there anything I am missing? [typo edited by moderator]

I see the great guides for how to fix the missing fonts in a .mogrt, where I assume my missing font error is coming from. I just have NO idea which .mogrt uses the missing font (b/c the project i am working on using a dozen across multiple sequences -  and the ones i've checked don't use the font). Is there a method to search the project to identify which clip uses the missing font? (i searched for the font in finder already and it's not registering a match). Last bit o' troubleshooting I did which deepens the frustration / mystery. When I do GRAPHICS>REPLACE FONTS the missing font is not listed. It is 100% just an annoyance - but one that I deal w/ every time I open the project and for every export - so yeah...

I have used this effect hundreds of times with no issue, but on this new project, this weird thing happens (and not all the time):I add Alpha Glow to a .png file that is an overlay. Most of the time, no problem. Most of the time in this project, no problem.Sometimes, it makes the .png file blow up in size (even though it doesn't show it on the Effects Control percentage). (These are not all the same .png file, but they are all the same size and made the same way.)Add the Alpha Glow - ..png file blows up.Undo it - .png file stays the appropriate size. Add the Alpha Glow - .png file blows back up. I try deleting the .png file and dropping it back into the timeline and rarely does it work. I want all these overlays to be consistent, but I can't when intermittently - and never before, only on this new project - the file to which the Alpha Glow is applied gets blown up in size.  It's frustrating because it shouldn't happen. There's no reason for that to happen. I tried s

Hello all, when I was troubleshooting this I couldn't find a similar problem so I'm hoping this is helpful to others.  I’ve had this problem a couple times and I think I’ve found a workaround. Here’s what happens: I’m working in a project with 59.94 footage that is interpreted at 23.98 to create a slow motion effect when the footage is dropped into the timeline. However, since audio from the same footage is used separately in the same timeline, the audio has a 250% speed effect so that it plays back at the correct speed and pitch.  This project was created by another person using Premiere on a different machine (iMac 5k). When I open up the project (also an iMac 5k), most (but not all) of these audio clips play back at the wrong pitch, even though the 250% speed effect (without the “maintain pitch” option) is applied. Speeding up the audio to 600% creates clips that have the correct pitch, but play back much too fast. Of course my goal is to open the project that an

Hello,I have recently updated my Premiere Pro version to the newest one and discovered the new caption tool.I started working with it and I realized that it is extremely laggy and slow. Every time I put a new caption or change a style, it almost feels like I need to way 30 seconds to 1 minute until the changes are processed and I can continue working. And this can become extremely tedious if there are a lot of captions to do for a longer piece of content.I have heard different feedback on working with this tool, where some people really like it and others find it as buggy as I do.My PC specs are also pretty good, this is not something that should slow down my work process. Maybe there are some settings I am using incorrectly? I am not really sure what is the problem.Can anyone help? 🙂 

guys, I don't know what I click wrong,I can't see a clips name in timeline.it might be disappeared after I click "show clip keyframes> time remapping".

Hello,As the title states, I have a multi-camera sequence and I have rendered the audio to show the waveforms, which works fine.However, if I close and restart Premiere, I lose those previews, every single time. I just get the audio track with a red line through it, and no waveform.I have my Audio Previews scratch folder set to Same as Project, and I don't see any permissions issues with that folder.I am on CC 2017.0.2. Any help would be much appreciated. Thanks.

Hi, can anyone else confirm that this footage is overexposed and not correctly recorded?becuase i think all setings in PP are correctly setup.  here is the source: https://mab.to/UiryYNiJYEoFO/eu1  

всем привет, помогите пожалуйста, перерыл весь интернет не могу найти решение своей проблемы, при импорте файла (путем переноса(перетягивания)) видео в премьер про, появляется крест, без ошибок, без каких либо уведомлений просто не импортируется видео. Что мне делать? Как это решить?Hi all, help please, I have searched the whole internet and can't find a solution to my problem, when importing a file (by transferring (dragging)) a video into premier pro, a cross appears, no errors, no notifications, just not importing the video. What should I do? How to solve this?

Desperately need help it all shows up overexposed and I have tried this https://www.youtube.com/watch?v=UY8JZybCn7s. but I cant access to tick the color management buttom. Is it a bug for IPHONE14 movies or how can I get the videos from my IPHONE 14 with correct colors in Premiere Pro? Help is very much appreciated Jenny