Questions

Intento abrir un proyecto guardado con antelación. Y me aparece este mensaje: NO SE PUDO CARGAR EL PROYECTO, PUEDE ESTAR DAÑADO O CONTENER ELEMENTOS ANTICUADOS. El úlimo día que lo abrí, rendericé una de sus secuencias, le dí a guardar por última vez el 29 de Noviembre a las 03:14 AM. Y hoy no puedo abrir ni esa versión, ni las las 20 Auto-Save anteriores. En todas me sale el mismo error. Tengo otros proyectos guardados anteriores a esa fecha que se abren sin ningún problema. No he actualizado a una versión más reciente que yo sepa, pero incluso anteriormente, he tenido otros proyectos de versiones antiguas de Premiere que al abrirlo con la nueva me ha actualizado siempre sin problema.  No se a qué se refiere con: "elementos anticuados" , pero no he cambiado nada en la configuración de Premiere y los archivos del proyecto aún están en las mismas carpetas, no he borrado nada. A ver si alguien de Adobe me puede dar una solución porque han sido 15 días d

Does anyone know how to do this? I created a bin with a bin of clips all shot in LOG on the same camera. Now I want to apply the LUT to all clips in that bin, so that the LUT is automatically applied whenever I use those clips in any timeline. As of know, all I know how to do is goto the project panel, double click the first clip to open it in the source monitor, then goto Lumetri, browse for the LUT cube file on my desktop, and poof, It's applied. Then I went into Effects Controls on that clip, copied the Lumetri effect, then went and foundf the second clip in my project panel, opened it in the source monitor, then navigated to the effects controls tab, and then pasted the Lumetri effect. And on and on it goes. There's got to be a way to batch this. I know that if the clips are in a timeline, I can simply select them all, then navigate to the timeline Effects Controls panel and hit paste to apply to all, but of course, I want to do this for the "global" source clips, not a singular in

Desde algumas atualizações atrás, não consigo mais copiar e colar textos com SFX's já prontos de outras sequências. Eu imaginava que poderia ser alguma configuração que mexi e não sei resolver, porém voltei meu programa pro modo padrão e continuou a mesma coisa. A única coisa que resolveu foi instalar uma versão anterior do Adobe Premiere, onde tudo estava funcionando normalmente.A grande questão é que é possível copiar uma camada de texto de outra sequência SOZINHA, bem como uma camada de áudio sozinha, entretanto, se eu tentar copiar as duas ao mesmo tempo simplesmente não vai. Para o meu tipo de edição, isso atrasa muito o meu fluxo de trabalho. Alguém já passou por isso e pode me ajudar por favor?

我正在使用最新版本 25.0当我的笔记本电脑显示扩展另一台显示器时，主窗口在扩展显示器上时，我右键单击修改属性，当出现该窗口时，右下角并没有出现取消和确定选项按钮。隐约可以看到，但无法点击成功，这想要什么ui bug，请告诉我该怎么做，我经常需要使用这个功能窗口。

When I try to zoom in on individual clips in the timeline using Alt + Mouse Scroll, the zoom behavior is erratic. The zoom jumps around, often zooming in completely on the timeline. I am using a Logitech MX 3 mouse.However, when I use the side scroll wheel of the mouse, the zoom works as expected with no issues.I’m confident that the issue is not with the mouse itself, as I’ve tested it with a different mouse and the same problem persists. This issue has been present in previous versions of Premiere Pro as well.Please let me know if you need additional information.

I have a few keyframes I wanted to copy and paste onto multiple other clips, but when doing so the keyframes aren't the exact timing anymore: instead of having the keyframes be one second apart, they are instead changed depending on the length of the other clips I'm trying to paste it onto. Is there a fix for this? I have also tried making it into a preset and applying it but it's the same issue. thank you

 Howdy,I've been googling a lot on audio for the Wireless Pro/Wireless Go 2 systems. I have both, but since upgrading to the Wireless Pro set I can't seem to get the audio levels correct for my video content. It seems that no matter the settings of the mic/camera when I export the audio and drag it onto my timelines, it is extremely low. I have to amplify it by +20 or so for it to be usable... I have ran tests but no matter what it ends up the same once I drag it onto the timeline in PP or Audition. Luckily the quality of the mic is still pretty good and the audio is still usable after I do a little noise reduction to clean it up. But it's still a pain, because inceasing the gain that much obviously increases the noise floor and creates noticeable unwanted hiss. Not enjoying this workflow and wondering why in the world it's importing so low. 😑 Anybody else experiencing this? 

Buongiorno, quando in un progetto devo organizzare le varie cartelle importando immagini, clip, musica o altro: non succede sempre, ma a volte capita che il processo d'importazione si blocca (vedi immagine allegata) restando aperta la finesrta "Importa file" ma non caricando nulla.Devo pertanto cliccare sul tasto "annulla" e rifare l'operazione selezionando gli stessi oggetti, per importarli. Di regola il secondo tentativo va a buon fine, ma a volte devo rifarlo anche una terza volta. Quando poi parte l'importazione, il tutto avviene rapidamente senza intoppi. E preciso che succede anche con file molto leggeri, non è quindi un problema di peso del file. Da cosa può dipendere? 

Hello, I work as an editor for podcasts and so far I have never encountered any problem when exporting. However, for some time now I have systematically had the same problem, no matter what project I am working on: the audio is completely out of sync (a few milliseconds added to each new clip, which is getting really weird) on every clip. I tried to export on Media Composer, but the problem persists. What is even weirder is that after exporting, it is even my project/timeline that becomes out of sync, while everything was normal before exporting. I am working on a Mac 2022 M2. Here are the files I am using. If it can help, I am attaching the audio track as well as one of the video tracks.   Thank you for your help.   VIDEO FILE :  2nd video file :   AUDIO :   PREMIERE PRO 2024 

I have the same problem, trying to edit a 4:3 vob file that I bring from a VHS TO DVD TO THE COMPUTER.  The video gets cut on the right it doesn matter on what type of sequence I drop it.  

Muy buen dia, Necesito instalar, premierre y After en mi Mac Pro late 2013, fabricada en 2018, que tiene Monterrey 12.7.6, como nunca lo habia instalado cc cloud solo me deja instara la mas reciente. Alguiente tiene estos enlaces, ya que servicio técnico no tiene servicio a esta hora.

Hello,As a new Premier Pro user, I'm wondering how to crop video.We've shot some footage on a green screen background, but this has been shot with the edges of the studio in it. We are unable to go back and reshoot, so I'm wondering if we're able to crop this out?And if so, how? The resolution otherwise is fine.

Title says it all really. I have a preset for enhancing the speech of the livestreamer I edit and I'd like to transfer that preset to a new computer I just bought. I don't want to export all of my settings, just that one preset. I'm using the latest version of Premiere 25.0 on both computers. Thanks for any help.

I've just edited a 45 minute piece shot in multicamera; all cameras & audio have been joined together as multicamera clips (as this was essentially studio shot, these shots tended to be a couple of long takes for each sequence, so there weren't lots of individual multicamera clips created, just a few long multicamera clips).When I've flattened the audio for an AAF export, Premiere Pro has repeatedly failed to flatten all of the multicamera clips; instead of selecting all of the multicamera audio edited clips and flattening them in one pass, I've had to go through, and manuallly enable and then flatten each individual edited clip in the timeline - and of course even doing this manual process, some clips have still been missed.  Why doesn't Premiere Pro perform the flatten multicam process on all selected clips?Tech specs MacBook Pro (16-inch, 2021)Apple M1 Max64gb ramMac OSX 15.1Premiere Pro 24.6.3 

After automatically updating to the latest verson of Premiere Pro, the App said my project was saved in a previous format and I needed to save it to match the latest version. I did that, but every time I try open the new project file it says "Project appears to be damaged and cannot be opened".I can't revert to an older version of Premiere Pro to see if it can be opened. I've tried uninstalling and reinstalling ALL Adobe products including Creative Cloud AND removing preferences.The closest I managed to getting it to work was by importing a select Sequence from the previous project into a newly created project, but then when I go to save it says "Project Save Error: An unknown error occurred while saving the project".No matter what I do, I hit a deadend. can't open my old project in the latest version of the software, and any new projects saved with the new version either will not open, or encounter save errors. I spent months on this project and now I can't do anything. Usin

Sequence in source window, mark in and out, insert into sequence in monitor. No matter where the playhead is parked in the timeline in the source, playback starts from in point. Why? An additional step of clearing the in and out will allow playhead to start from anywhere. This is not good.Thank,Barnaby

I just need to get it off my chest that Premiere is growing more and more out of touch. I can't believe Adobe has the audacity to put Red, Arri and so on presets under Legacy (?) yet its features for today's editing style are so mediocre chiefly the captions (Auto Reframe also sucks but I understand they're trying to sell AfterEffects). Are these people even watching trending videos? Has any of them looked at CapCut or Davinci? Captions is a whole circus in Premiere. The fact that I can't have multiple subtitle tracks active at the same time, I can't apply a style to seperate text clips to have different styles for different speakers. When you save a preset it doesn't preserve the format settings (all caps italic etc.) Speaker tagging hardly works. The captions are generated by number of characters not number of words? Who needs that? There's no follow/highlight spoken word option. The funny thing is it could do that because in the transcribe panel you can clearly see it follows words.

Logged into Premiere Pro like any other day, and all my project files, recent projects, auto-save folders, audio render folders, video render folders, all missing. Spoke to someone on chat who didn't know the issue. Was sent an email that someone was going to contact me during a certain time about my issue from some senior support team, they never did. None of my source footage was deleted, but the project files are my main concern. Extremely frustrating. 

J'ai une mauvaise qualité audio après l'exportation premiere pro comme si une effet a était utiliser   Node: Subject edited by moderator.  

I recently reinstalled Premiere Pro (v24.0) and I can't find the "flip over" transition? I can't find the folder (3D Motion) it's supposed to be in when I know I had it a year ago before I uninstalled Premiere. Is there something I'm missing?   

Hallo.Kann man bei Premiere Pro Plugins zur realistischen Sprachsynthese nutzen?Aber offline lokal. Nicht mit API-Key zu Elevenlabs etc..Scheinbar soll jetzt alles was KI-Spracherzeugung angeht, per Abo verkauft werden.Zugleich gibt es aber auch freie KI wie E2/F5-TTS die belegen dass das grundsätzlich auch auf Privatrechnern geht.Bei E2/F5 scheinbar noch kein Deutsch. Evtl. bisher nur per "fish".Früher war es normal dass Sprachausgaben Software zur lokalen Installation waren.Wer auch ein interesse an so etwas haben müsste, wären YouTube, TikTok und Co., also auch so etwas kostenlos anzubieten.Für mehr bzw. bessere Inhalte...

Summary:Lumetri Color randomly applies "Auto Color Adjustment". This has been happening for several versions of Premiere Pro. Frustratingly, it seems to happen randomly (cannot be reproduced every time). Steps describing the bug:1. Open History panel (so the Auto Color Adjustment step can be seen being applied).2. Open Lumetri Scopes panel.3. Create an adjustment layer above a clip.4. Apply Lumetri Color effect to the adjustment layer.5. Make changes to the Lumetri Color effect using the sliders in the "Basic Correction" panel and by manually inputting values and by up and down arrow keys.6. Without clicking anywhere else, click the play head on the timeline and scrub it.7. Auto Color Adjustment settings are applied and the step shows up in History panel.8. Sometimes just scrubbing the play head over the adjustment layer a few times will cause Auto Color Adjustment to be applied. What should have happened?Auto Color Adjustment should not have been applied. My original co

import an old project[1 week old] into a new project and captions are all misaligned>>I did update to a newer version of premiere pro because my project was corrupted, so I had to look through my autosaves to open an older version of the project, earlier ones were corrupted as well. However,  Importing this 1 week old older autosave version finally did the trick, and I'm able to open my project file again, thank god... But then all my captions for all my different projects are mismatched and misaligned.

I can't find this anywhere. I see how to align text, but not the objects (where you can align them to each other and/or to the screen).