Questions

Premiere Pro Version 24.5Ich habe eine Gradient Background MOGRT file als Vorlage in das Essential Graphics Fenster gezogen und konnte die Farben in den entsprechenden Feldern verändern. Jedoch tut sich in der Vorschau nichts. In einer Anleitung von Adobe steht, dass nach dem Anpassen der Farben ein "installieren" Button im Essential Graphics Fenster angewählt werden soll. Dieser scheint bei mir aber nicht vorhanden zu sein. Als Gerät verwende ich ein MacBook Air. Ich wäre über Hilfe dazu sehr dankbar! 

When I import my audio files (ZOOM0001 - MP3), it always works, but for some time now, some files are not transferred.Let's suppose that out of 20 files, 18 are successful, and 2 do not go to Premiere. In this case, I need to move these 2 to another folder and then move them to Premiere.

Experiencing a new issue recently where after removing a clip from the timeline, a frame of the removed video is left over.  You cannot see it visually in the timeline but while playing back with the new clip, or even without it... empty space, there is a flash of the old video – just one frame and no audio.The project was rendered and exported/outputted but decided to make a couple changes.  Suspect it has something to do with the rendered project that then has difficulty completely removing the clip or something like that but no clue really on what is going on.Anyone have any ideas?  Haven’t experienced this before and it just started on some recent projects.

What is going on with Adobe again? Ya'll are a ripoff and still operate like trash.  You got apps like Capcut schooling ya'll on how to be consumer friendly and free.   [abuse removed by moderator]

Adobe Premiere Pro timeline zoom width is gone in the latest 2024 version (24.3.0, Build 59), and it's not even an option in Keyboard Shortcuts (can't even search for "width"). Totally frustrating to have to use the old and awkward slider balls on the bottom, or keep switching between "z" and "Opt-z," and then back to "a."  Losing "Cmd-Minus" (Timeline smaller width) and "Command-=" (Timeline wider width) is horribly frustrating! And never happened before. Adobe??

i am facing a issue My Left side headphone is working fine but right side is too low, I rested the audio setting then also its the same and also reinstalled the PP but remain same . also used the effect fill left to right then also its not working ,also changed the footage 

Bonjour, Je rencontre actuellement un problème au niveau du texte avec Adobe Premiere Pro 2024 et j'aimerais le résoudre. À chaque nouveau projet que je crée la taille devient différente (exemple: 110 devient 230) et même parfois l'emplacement se modifie. Je précise que j'utilise toujours la même police. Je travaille sur des montages avec des vidéos qui sont parfois dans différents formats différents, cela aurait il un lien ? Et y'a t'il une solution ? Merci d'avance

Bonjour,Je rencontre un gros problème avec la colorimétrie poremière pro sur mon iMac. Lorsque je modifie la couleur dans Premiere Pro, tout semble correct dans la prévisualisation. Cependant, le rendu final exporté n'est pas le même que celui affiché dans la prévisualisation. J'ai essayé plusieurs solutions, mais cela fait deux jours que je n'arrive pas à obtenir un rendu identique entre la prévisualisation dans Premiere Pro et le fichier rendu. Si quelqu'un a déjà rencontré ce problème ou a des suggestions pour y remédier, je serais très reconnaissant pour votre aide. Merci d'avance !

I see all the people with a timeline composition and colors different to mine one.I try to reset the settings and nothing change.I would be very grateful if someone could help me fix this problem. 

In all Adobe programsI have the ContourShuttleProV2 and I've never had any problems setting up and programming these until windows 11. After I installed Windows 11 on 1 PC, I can't get the shuttle to work in Adobe(all programs). The shuttle works in quick time player, microsoft edge and other applications. I can install the shuttle but programming (giving the buttons a different function) does not work. I've been working with the shuttle company for weeks, but they can't get the shuttle going in AP either. Can you help me please? 

I've just updated Premiere Pro and After Effects to their latest version and I'm having the following issue:every time I want to use the function "Replace W/ AE Comp" a pop-up appears saying "After Effects 2024 must be installed to import this file", but the fact is that I already got installed AE 24 on my PC (Windows).  It has always worked properly until this morning's updated. Can anybody help out? I've tried to uninstall AE, and install the previuos version but nothing seems to work.   

Hey,   I just bought a new MacBook Pro (Apple M3 Max, 64GB, Sonoma) and I've been have been having issues trying to open an old Premiere project. I imported most of the files from my old mac with Time Machine, but I had to reinstall Premiere and the blackmagic plugin because my files weren't linking to the timeline. Now that the plugin is installed I'm still getting these scrolling red bars when I try to play the clips. Rendering doesn't help, any ideas?  

I am trying to create an extension in adobe premier pro using extendScript debugger for vscode. I have run the following debugging in a jsx file [[[thisClip.start.seconds = 4;$.writeln("\nthisClip.start.seconds >> ",thisClip.start.seconds);]]] The following output was generated.[[[thisClip.start.seconds >> 1]]]   I also ran the following code [[[var project = app.project; var sequence = project.activeSequence;var videoTracks = sequence.videoTracks;//var thisTrack = videoTracks[3];var thisTrack = videoTracks[0];var clips = thisTrack.clips;var thisClip = clips[0]; alert(thisClip.duration.seconds);alert(thisClip.end.seconds);alert(thisClip.inPoint.seconds);alert(thisClip.outPoint.seconds);alert(thisClip.start.seconds); ]]]]] I get the following error [[[[Exception has occurred: 1Illegal Parameter type ]]]] If I assign a number to a variable and it doesn't reflect well, how do I solve it?  

The Playhead/cursor keeps getting stuck until I'm paused, then it jumps to where the video paused.1. Press play2. The cursor head doesn't move at all no matter how long I'm letting the video run.3. Press Pause 4. The cursor head jumps to where it should be in the timeline. This glitch started a couple weeks ago when I started using premiere pro on my laptop but when I switched back to using it on my pc it was still doing it.The only other difference I can think of is now I have my content on an external harddrive instead of my internal hardrive since I have so many hours of raw footage downloaded to edit that I can't have it just stored on the internal drive.I don't have any 3rd party software or plugins running. My PC is an NZXT with the following Specs:-AMD Ryzen 7 5800X 80core processor-(MSI) Geforce RTX 4070Ti-32GB / RAM-Windows 11 

Excuse me, @Kevin-Monahan, "Three times faster ProRes export speeds" -  is that 3 times faster backwards or is it on Mac only? Because on Windows 11 (14700K, 64 Gb Ram, RTX 4080), this is version 24.4.1 (2 takes for a clearer result):   And this is 24.5:     This is the footage I used: https://www.videezy.com/abstract/18651-drone-orbiting-an-old-castle-in-4k   The Export settings in version 24.4.1 were set the same way the 24.5 sets by default, export in mov, Apple Prores, 16 bit, rec709  

Howdy Adobe technophiles!My news is: I have installed Adobe Encore on my HEDT running Windows 11!However, it seems I have to log in everytime I want to use it, but that is fine with me, at least it works.I just put together a Blu Ray disc in the Encore software, then made an ISO file with it, and when I get some more discs, I will burn it to the optical media. When I upgraded to Win 11 back in early July 2024, I could not for the life of me figure out how to get Encore to work on it... I had it working on Win 10 just fine, but had a heap of difficulty getting it to load with Win 11. Searched the forums, as well as other sites to see if anyone else had it working and I could not find anything that provided a pathway to do so, with most folks basically giving up and telling poor saps like me to get over it, find something else, after all it has been a decade plus since Adobe abandoned its customers/suckers who have the audacity to continue making physical media. Well IMHO there is n

Hi. I have three video files for a podcast. Host, guest, wide angle. Three audios- Host, Guest and mixed audio. Lengths in terms of time are different. I used autopod with individual audios and videos. But the audio and video haven't synced. I am unable to understand. Can anyone else? 

Hi so I'm trying to export a video i edited which uses both 1080p 60fps camera footage and iphone HDR footage (I think around 24fps). It's just under 2 minutes long but is taking 30 minutes to hour to export which is far longer than anything i typically export at this length (I have a MacBook pro 2021 with 16gb ram and M1 chip) I've tried to interperet all the footage to the same FPS because i figured that may have been creating some of the issue but that didn't seem to do anything. I'm not sure what to do in this case, I'd love to not have to render and replace each clip as the edit thus far is relatively complex but will do what it takes to avoid the export times. Let me know what you think is a viable solution. Thank you. 

How can I download previous versions of Premiere Pro lime Premiere 2022? 

Hello Friends,  I am sharing my query on Assembly and Basic Cut phase of a project. So while scrubbing though a long single video clip, I may have multiple in and out points, so different time stamps. Can I mark them without dragging it into timeline. I am aware I can do an In and Out once in a single video clip and when I drag it in only the selected portion will be brougt in.But Can I do multiple In and Outs on a single clip? ThanksA.K 

Hi,   Premiere: 24.5 (downgrades to 24.1 at the moment)Mac OS: Sonoma (latest version)Systems: Mac Studio Ultra (2022)   I've been working with Premiere (and Productions) for a long time, but in the past couple of years I keep stumbling into issues when it comes to large projects. Specifically Production projects, holding terabytes worth of footage, all to be used by multiple editors to edit large sequences (40 minutes).   For example, one Production could house an 8 episode tv show, all shot in 4K or UHD. Besides 50 TB worth of camera footage, that also comes with action cam footage, proxies and other assets.   Some of our projects come with multicam, others don't. The ones that do, always give us a headache. When we start it always works out, but somehow they always manage to slow down or cause crashes. Whether it be from scrolling through a bunch of multicam cuts that sit next to each other on a timeline or from dragging some footage (or another edit) from one se

Premier Pro will not launch on my PC after the update on 24Aug2024.  When I click the icon in the task bar, Windows give me a message stating, "This app can't run on your pc to find a version for your PC, check with the software publisher."  Is there a way to revert to the previous version? 

O meu premiere não renderiza projetos grandes, apenas projetos pequenos, já tentei reinstalar, segui alguns tutoriais no youtube, mas nada deu certo

I am in desperate need of Adobe Premiere Pro, After Effects, and Media Encoder 2019.I am usfin a GoPro 360, and GEOlayers 2, and the software is to old to work on any other versions.Can someone help me with the install files? I need the .dmg files for Mac. 

With an "auto-matched" audio clip....I noticed that if I cut it with the razor tool, when it splits into two clips it automatically undoes the "auto-matching" and then I have to reapply it to each of the new clips.  Is there a way to lock "auto-match" to an audio clip, so that if I cut the clip, all the pieces stay "auto-matched"? Thanks Also, is there a way to create shortcut key to "auto-match" an audio clip? I'm not seeing that option in the Keyboard Shorcuts window.