Questions

I was using Permiere pro 2025, I have used it for about a dozen projects, one of wich i had an issue with it not using my GPU. After clearing Media Cashe it was solved. The current project I have that is not working and neither media encoder or Premiere are using my GPU 3080-Ti. I have installed the updated drivers and cleared Cashe, all settings are greyed out and to use CUDA GPU graphics enabeling. I have never liked adobe products they never run well.   [Branched from older thread by mod]

The Channel Mixer effect has been deemed, "obsolete. " I assume because of old code,  but what new effect can duplicate its features?  I use this effect to accurately and easily create monochrome RGB color seperations of color footage. (As if I shot on black and white film with an R, G, or B  filter.)  Once I have that channel seperation I use it on a layer above with the luminosoty blending mode to add customized color punch to the color footage below.    If I try to replicate this with Lumetri curves by pulling out the unwanted channels and desaturating it it does not produce the same image as the old channel mixer would.  Its density is wrong, its darker and it also does not behave properly when using a blending mode.   Is there an updated replacement for this or am I going to have to dynamic link to AE and use its channel mixer or suffer with the horrible realtime performance of the old effect? 

Help!   Working on a feature documentary with archive footage of different frame rates. The project is 24fps.   In the last few days I've noticed that when interpreting 29.97fps material as a 24fps it's adding duplicate frames which gives it a stuttered look. This is also happening when interpreting other frame rates as 24fps.   I feel like I'm going crazy, because I'm pretty certain that when I've done this in the past it's simply slowed the clip down by the requisite amount - to include every frame from the 29.97 footage in the 24fps timeline.   I'm doing this via the 'modify clip/intepret footage.' And for 25/29.97/50/60 fps footage...   I updated to 24.6.3 not so long ago and wondering if this is a bug in this version?   Pulling my hair out on this and can't see a releavant post on here addressing it - which makes me feel even more crazy.   Any help really appreciated.  

Hello Everyone.When you right click on a Image, would you please explain what is the different between Set To Frame Size, and Scale To Frame Size.Thanks.

Sur PP2023, les effets appliqués à une séquence sur la timeline et/ou sur un calque d'effet n'apparaissent plus directement ou après rendu sur l'image de la fenetre programme. Seuls 2 ou 3 fonctions de bases actives - positionnement et opacité

I have an 8mm and Super 8mm film scanner and it captures the films at 20fps, which looks perfect (some capture methods at other framerates can make the footage look sped up or slowed down). I can edit the files in Premiere at 20fps, but when I go to export, it won't allow me to export at 20fps no matter what container or codec I choose.I'd like to keep the final exports at 20fps because converting them to 18, 24, 60, or something else causes noticable frame smearing, jumping, etc. Is there a way to do this? If I used the Apple Pro Res codec as my previews codec and rendered all the previews, then choose "Use Previews" when exporting, would that keep it at 20fps even though it won't let me choose that from the drop-down menu? Then I could take that file into something like Handbrake and export the h.264 from there. From what I understand Handbrake will let you export using h.264 at pretty much any custom framerate.Edit: I tried rendering previews and then exporting and telling it to "Us

I usually create proxies through Premiere Pro using the Low, Medium and High Proxy settings, but recently, I tried to create proxies directly in Media Encoder, and I could not find those settings in the presets.Are those settings available in Media Encoder?Can they be created as a custom preset?

Hey, my Colors look diferent after i export in PremierePro 2025. I did a bit of research and already have the 2.2 (Web) Viewer Gamma, for the export i use the QT Gammy Compensation LUT and i review the Video in Frame.io and not QuickViewer.I have no more ideas what to do and need help.After export:                                       Befor export:

Hi guysI solved the problem of not having the effects of Red Giant Universe in Premiere!The solution is that Red.Giant.Universe.2023.1.1 is compatible with Adobe.Premiere.Pro.22.6.2.2.x64 version.Each Red Giant is better compatible with a version of Premiere Pro.This solution is good for those who have an older system like me and can't work with Red Giant2025!Enjoy.

Hello,I'm working on a feature film that is still in production, and I've run into a series of critical issues after receiving a new batch of media from the post-production studio. The project was running smoothly before this.Here are the specific problems I'm facing:Sudden Performance Degradation: The entire project has become sluggish. Timeline navigation and playback are laggy and unresponsive.Frequent Crashes: Premiere Pro is now crashing constantly, which was not an issue before.Broken JKL Trimming (Rolling Edit): When I try to perform a rolling edit trim using the JKL keys, the clip edge moves by 5-10 frames and then immediately snaps back to its original position. However, trimming frame-by-frame using the interface buttons (+1 frame / +5 frames) works correctly. If I create a brand new sequence and copy-paste all the clips from the problematic one, JKL trimming works again, but the issue returns after about 30 minutes of editing in the new sequence.I have already confirmed with

I just upgraded to Premiere Pro CC 2017. Much to my dismay, the "Replace With Clip" functionality is not working. I've restarted Premiere and restarted my computer with no results. I'm certain I have the clip selected in the bin and the clip selected in the timeline.I'm working on a PC running Windows 7 with plenty of RAM (16GB). I've never had this problem until I upgraded to 2017.Here's a screenshot. The "Replace With Clip" item is greyed out in the contextual menu. My keyboard shortcut to "Replace With Clip from Bin" does not work either.I use this function all the time and need to find a solution pronto!

Ich habe Premiere CS6 auf einem neuen PC mit Windows 11 installiert. Das funktioniert einwandfrei. Das Problem: Es existiert ein älterer Laptop mit Windows 7, von welchem ich das damals erstinstallierte CS6 nicht deaktivieren kann. Ich habe mich als Adminstrator angemeldet, Aktualisierungen durchgeführt und den Application Manager installiert. Ich bekomme immer die Fehlermeldung, ich sei nicht mit dem Internet verbunden, was aber nicht der Fall ist. Daher kann ich auf dem neuen Rechner die Seriennummer nicht freischalten, da die maximale Geräteanzahl (2 St.) erreicht ist. Es gab zwischen den beiden Geräten nämlich noch ein weiteres, auf dem CS6 installiert ist. Dort möchte ich die Software aber nicht deaktivieren, da sie dort ebenfalls noch im Einsatz ist. Ich habe Stunden damit verbracht, nach einer Kontaktmöglichkeit (Chat, Email?) zum Service zufinden, der mir weiterhelfen kann. Irgendwie dreht man sich auf der Arcor-Seite im Kreis und kommt nicht ans Ziel. Ist es denn nicht möglich

Hi everyone, I’m working with some underwater footage for a scene on a film, and both cameramen who provided the material mentioned that it’s worth slowing down the footage beforehand to make it look smoother. The first one suggested slowing it down to around 80–90% of the original speed, while the second recommended converting the 60 fps footage to 25 fps. What would be the best approach? I’m editing in 25 fps and the footage is in 60 fps. Should I just drop it onto the 25 fps timeline, or should I interpret the footage as 25 fps, or is there a better approach?  Thanks 

Obi wan.. paying 30 bucks a month, can't launch.. go to run exe file in adobe premiere pro 2024 exe, says:adobe premiere pro.exe application error the application was unable to start correctly (0xc0000142).Can't figure out solutions, no live chat help support. Meanwhile, getting billed. Can't launch Adobe premiere pro 2024, even though I'm getting billed for it. No chat support available.. maybe cause it's 3:51pm Saturday.. no, not late in the evening. oh well.. guess I'll just keep getting billed for a product I cannot launch. 

ADOBE PREMIÈRE PRO 25.5MAC BOOK M3Je place comme d'habitude un masque ( flou gaussien) sur une zone dans mon image, et lorsque j'appuie sur la flèche blanche "suivi du masque sélectionné vers l'avant",  le suivi du masque d'effet ne s'affiche plus en lecture dans la fenêtre programme.  L' effet est pris en compte, mais on ne peux plus le visualiser durant l'éxecution, ni donc vérifier au fur et à mesure si il faut agir dessus.

I am doing a voice over. My problem is that each time I record a new clip I have to apply my audio effects to it manually (this is tedious). I know I can apply effect to an entire track, but I can't seem to apply my preset to it. The problem is that i don't want to manually replicate my EQ mixing in the new window.

Hi everyone,I'm working on creating a tutorial video where I want to highlight specific parts of a website or app interface. Ideally, I’d like to zoom or pan into the highlighted section while blurring out the rest of the screen to help viewers stay focused. I’d also like to add arrows pointing to key areas. I’m not sure what this effect or tool is called, but I’ve seen it used in tutorial videos—specifically from Jeff Su’s YouTube channel. I’ll upload a screenshot as an example to better explain what I mean. Any suggestions on what tools or techniques I should look into would be greatly appreciated.

Hola!   Me he cambiado el ordenador, también un macbook air con chip Apple M4, mac os Sequoia 15.5.   Intento instalar Premiere Pro y me sale este mensaje: "No puedes abrir la aplicación Premiere Pro Installer porque no responde".   Alguien sabe cómo lo puedo instalar sin que me de este problema?   Gracias   Anna

Hi all,I've searched the forum but can't find a thread about this... I'm experiencing a strange feature/bug that's pretty irritating. A few minutes after I start Premiere, the timeline will start scrolling whenever I move my mouse cursor away from the center of the screen. You can see this happening at the link below:Private Video on Vimeothe password is: autoscrollTo be clear: this doesn't happen when I first start Premiere. It's usually 5-10 minutes into a session, and then I have to quit and re-start the program to get a few minutes of peace. Is this something I've accidentally turned on, that I can deactivate? It's really annoying to have the timeline scroll to follow my cursor, when I go for my effects or media browser.iMac running 10.10.3, Premiere Pro CC 2014Thanks for your help!Paul

Whenever I sync multiple audio tracks down to the nearest sample using "show audio time units" and THEN move my clips to a different part of the sequence, to a new sequence, duplicate the sequence, or even just close and re-open my project file, all the audio in my sequences un-syncs back to where it was originally, to the nearest frame. It's like premiere just forgests everthing about where I moved my audio track to at a sample level and only remembers information at the frame level. All my audio is in 48 kHz and it's not a drift issue. All the clips just un-sync when I do any of those things above.Anyone have a solution or workaround for this, or is it just a bug in premiere they need to fix?

Hello I am working with a client on Premiere Pro productions. I work on a Windows and my client works on a Mac, we are working on a productions project using a dropbox account synced with both our drives, everything is working great but my client recently brought an issue saying that the sound effects I had added were not synced to the movements, although at my side that didn't seem like how it is going, whole working on the project he also mentioned that some of the dialogues are starting soon or cutting in between which was not happening on the timeline at my side. Another issue is that I have used some Film Impact transitions and effects and some legacy effects, but on the client's side the project is giving an error of missing plugins, {Video Transition missing:  FI: Text AnimatorVideo Transition missing:  Paint SplatterVideo Transition missing:  Random BlocksVideo Filter missing:  FI: Text AnimatorVideo Filter missing:  Change to Color}Although as far as I

Working on an iMac, Apple M1, running on Sequoia 15.6.1, I get a "Force Quit Applications" notification on screen when attempting to export an 80 minute video. The application completely stops the exporting process at 22% and doesn't move for more than 30 minutes. I've cleared all caches. A little frustrated on this, as this has been a problem since early in the week, and I edit a weekly video podcast. How can this be fixed? Please advise. 

Hi, I want to fully understand how to read the motion path in my animated still, and have a few questions: 1.   What does the endpoint of the downward path at the right represent in the 2d screenshot?  This endpoint is where the image reaches the 3rd set of keyframes, and stops panning up, left and zooming in.  It obviously has a specific relationship to the image, I just don't know what it is. 2.  In the 3d screenshot, the vertical path is just reflecting the upwards movement of the pan, right?  But why is it a solid, not dotted blue line? 3.  In the 4th screenshot, a dotted line appears moving leftwards and down.  This comes during the 2 sets of keyframes where the image is panning left and zooming in, as the image has already started moving both left and up.  Its appearance seems random to me.  Why does it start where it does, and what is it showing - that the image is panning left? @Conrad_C helpfully explai

If I use an External Recorder such as Tascam 701-D, or Mix-Pre6, during a shoot, I use the PluralEyes 4 to Sync the Audio Of the Recorder, and the Camera, at It does a pretty good Job. Inside Premiere, there Is an option of Merging Clips and Synchronizing Clips.Which Method is the Best choice using Plur Eyes 4, or the premiere Synchronizing options?Thank you very much.

Adobe and Community, please help me out:   I am working on creating a database of video clips, all of which have audio narration. The goal of this database is to have associated transcripts to act as metadata for the video clips. The Adobe Premiere transcription feature seems like a silver bullet at first glance, but it has two major flaws. First, the .prmi is not editable, meaning one cannot simply open it up to fix bad transcriptions. Second, editing the transcription on Premiere does not update the .prmi file - the corrections are only stored with the project they are in. So the database will keep the original bad transcriptons. Also, I ALREADY have transcription of all the clips even before the .prmi is created, so it would be ideal If I could feed these transcripts to Premiere so it doesn't have to generate a transcription from scratch (with errors). If anyone has a solution for this workflow, they would be my hero! Possible solutions would be: 1. A way to open .prmi fil