Solved

Hallo,wenn mein PC mit dem Ethernetkabel verbunden ist, kann ich zwar LR laden, aber das zu bearbeitende Bild erscheint nicht. Sobald ich auf WLAN umstelle funktioniert alles reibungslos. Was kann ich Tun. Ich möchte eigentlich mit dem Ethernetkabel ins Internet, da WLAN sehr schwach ist.

I watched tutorials on how to recover but I didnt have autosave on and when I try to import it into a new project it says the same thing is there any way to fix this? Please I need help super bad right now!

Adobe Reader использует странный шрифт, когда я делаю подписи на русском языке пользуясь инструментом "Заполнить и подписать". Почему-то используется фигурный шрифт, а мне нужен обычный, типа Arial. Как изменить шрифт, которым пишутся подписи на русском языке?

I am running Photoshop 26.8.1 on my 2019 Mac Pro (macOS Sequoia 15.5). Recently I have noticed that the vertical lines from the sides of displayed panels and the grayed out areas below the panels and toolbar have disappeared. Here is a screenshot:  This seems to be working normally with Photoshop on my MacBook Pro. What do I need to do to restore the lines and grayed out areas below the panels and toolbar? Thank you, Stan

If I put a vertical (or auto, or one of the other 6 buttons at the top of the transform module) transform in a preset and then apply the preset to a bracketed set, will the transform apply to all of the bracketed images in the same way, so they will still be aligned, or might the transform be different for each image and foul up their alignment.

With the last version, i get an error on the GPU.Lightroom works fine.Photoshop does not support the 1060 anymore?

회사에서 ACR 쓰는데 노이즈 제거 Ai 기반 버튼 누르고 적용하면사진이 하나 더 만들어져요 ㄷㄷ;;원래 그랬나요?아니면 안 만들어지게 할 수 있나요?

Okay I thought maybe I could figure this issues out own my own. Am currently helping a company rebrand themselves. We just received the approved color palettes to use to start swapping out colors. Now my issue here is that I keep entering the HEX values and noticed it swapped back, of course this was brought to my attention by my boss ( who probably thinks am not using the right Hex). So I was told to enter the values separately. So when I reopened the file I thought maybe I had entered the wrong Hex. But now I enter it the probably values in RGB and CMYK in the color picker, and the hex goes into the correct one. But once I reopen the picker, it swaps it back again. I am using the latest version and even tried to look into any videos that may help. But haven't found a corrected answer. I know it maybe has to do with the color settings. So the color am trying to use is #FFD400 and it keeps switching it to #FED402. Someone please help am about to pop a blood vessel..

Im making a movieclip as a navigation button on my html5 canvas. I want a simple roll in and roll out animation. What i noticed is the animation wont roll out from the button. I have asked chatgpt everything how to make only a specific area of a movieclip interact nothing works. Also the movieclip is glitchy sometimes even when the mouse is completely out from the movieclip it still holds on hover. I have tried so many codes and everything. How can i make it work smoothly and make several buttons in the same movieclip do the same roll in roll out animation you see in the video i attached.This is the code for me movieclip right now: let currentState = "idle"; // Can be "idle", "hovering", "hoveringOut"this.navi1.stop();this.navi1.addEventListener("mouseover", function () {if (currentState !== "hovering") {currentState = "hovering";this.navi1.gotoAndPlay("hoverIn");}}.bind(this));this.navi1.addEventListener("mouseout", function () {if (currentState !== "hoveringOut") {currentState =

My html file is broken. Whenever i open it the last frame doesn't work all the buttons dont work. However if i test the website from animate it works. Why is this program so full of bugs. Please help.

There is a bug where audio won't play in the timeline or library, I have the audio set to stream. I've tried everything and no matter what, it still won't play. I don't know if it's something to do with preferences or my pc but NOTHING HAS WORKED!!!! it can be played when i test the animation though i will 

So i'm trying to export a very simple movie, which is basically audio playing over a single background picture with texts appearing over the bg. Its only 148mb, and I've exported WAY bigger projects than this but this one particular file somehow seems too much for the program to handle?  This is very odd considereing the simplicity and small size of the file. I've tried restarting animate, and saving the info to another file, but nothing works. Are there any signs of corruption or anything i can look for? Again, this is a tiny project compared to most of what I've done

OM-5 Mark2を購入し、早速Lightroomで編集しようとしましたが、RAWデータが読み込めません。ORFという拡張子です。試しにPhotoshopやLightroom Classicを試したところORFデータは読み込めました。何故、Lightroomで読み込めないのでしょうか？解決策をお教え頂ければ助かります。宜しくお願い致します。

Since yesterday I can't connect to Team Projects on After Effects both on MAC and PC. This seems to be related to my account because my colleagues on the same network have no trouble in connecting to their Team Projects.

 Getting the error for all rest services on a subset of our production servers: Cannot resolve PropertyFilter with id 'coldfusion.runtime.Struct'; no FilterProvider configured Appears to be the same error as:Solved: API Error: Can not resolve PropertyFilter with id ... - Adobe Product Community - 14335256 Which is marked Solved but does not seem to be solved.  Ticket that was created related to that post was closed by tech support and not resolved. Wierdly this only occurs on half of the 4 nodes in our cluster.  All servers share same configuration and same code base from shared NAS.  When I hit them directly I can see 2 consistantly return the error:And the other 2 nodes consistantly return expected JSON output. Of course when we hit them load balanced we effectively get random failures depending on what server I am sticky to. I confirmed there are no trailing slashes as called out in the article above: This has persisted thr

Hi all   I recently replaced an internal hard drive with an internal SSD. I cloned the drive using SuperDuper, copying ACLs.   A side effect of this is ever since that replacement, I can no longer save EXSISTING Illustrator files. I have to resort to Save As... each time. I get the -54 error every time I try to save a file. It's getting really annoying.   I thought it might be a drive permissions issue at first and reset all ACLs and permissions, even turned off ownership for that drive. Nothing made any difference.   Any ideas????   Cheers m'dears Adam

I'm using Premiere to compare captures from VHS tapes. A friend with a whole heap of capture equipment and software, has generated 40 captures of the opening spiel from a professional VHS tape (we assumed it would be a good place to start our investigation), using different capture techniques, so that we can judge which is the method that gives the best results when we capture our own tapes.   The captures have been layered and aligned so that I can immediately compare any two by turning the layer visibility on and off.  Two such captures are Video 9 and Video 11 .   But something came up straight away that I can't explain. I have uploaded 6 screen shots taken from Premiere.  See attachments.   Video 9a, of rolling credits, shows horizontal lines through the letters, whereas Video 11a does not. Such lines are not visible at other points of the captures.   I have posted about this on a VCR forum, where it was suggested that the lines are interlacing. I'm no

I am having such a frustrating time exporting videos.   I work for a local lifestyle social media platform that makes daily vertical videos about the community. I dont exactly know when it started, been half a year i'd say, but on 80% of my exports, ive been getting 1 or 2 black frames in the final product. HOWEVER, on the export, only the VIDEO has the black frames, and not the captions. So for that frame, the captions are still visible. And on each export the black frames may appear in completely different spots.   My temporary solution is having a co-worker export projects for me, thinking that it is something with my machine. BUT, recently they were let go, and i had to shift to his station. To my surprise, my exports STILL have the black frames. Then i thought maybe i adjusted my export settings differently from my co-workers, but it turns out they are EXACTLY the same settings. I've still been exporting on ANOTHER co-workers machine under their account, and it turns ou

 I've been encountering a persistent Scratch Disk issue in Photoshop despite following the recommended troubleshooting steps. My Mac is running on macOS Sonoma, and even with over 300GB of free space on my hard drive, the Scratch Disk error persists. Upon checking my storage usage while Photoshop is open, I noticed that System Data is consuming an unusually large amount of space, reaching up to 300GB. I couldn't find any effective method to clear this System Data, so I opted for a complete reinstall of my Mac. After the fresh installation, everything is running on the latest versions, including Photoshop. However, the Scratch Disk issue remains. When Photoshop is closed, I have around 900GB of free space and System Data occupies only 18GB. But as soon as I open Photoshop, the free space plummets to almost zero, and System Data balloons to 860GB again (screenshots attached). I'm at a loss as to what's causing this sudden surge in System Data usage and how to rectify the S

I'm on the latest version and the latest iPadOS. I have an image with transparency. Epwhen exporting to png this is flattened. I need to save the alpha channel.. What am I doing wrong? I can find any export settings.

I see several designers have posted about not being able to download their project with the "replace asset" error message. There is no way to know which asset doesn't have a licence, even when you click on the "replace" buton. I have a premium subscription. I've wasted hours trying to download a simple poster for a fundraiser, so frustrating.

Several people have posted about this problem, but for years nothing seems to have been done, so I'm adding it as a bug. 4K Multi-Cam clips appear zoomed in when working in a HD sequence. 4K>HD is a common workflow, not an edge case, and therefore this should be fixed. Resizing hundreds of multi-cam clips isn't a solution.     

In older versions of AI when I copy and paste art into a file that has a swatch of the same name it would ask me if I wanted to "add or merge swatches".  But now it is just automatically merging them without asking.  I can not find how to turn that dialogue box back on.  Any help is appreciated, thanks.

Hi, a few of my photos were not approved.NON-COMPLIANT IMAGE or TECHNICAL ISSUES.

When exporting a sequence in xml Premiere Pro and importing it into Davinci and vice versa the Audio lines are extremely bugged. For example 1, 2, 3 (Mono)is duplicated into mono clips by Davinci and Premiere Pro too and thus should turn into 1L, 1R, 2L, 2R, 3L, 3R (Stereo)but instead turns into1, 1, 1, 1, 1, 1 I have tried to fix it using Premiere Pro and Davinci resolve on different PCs.In addition to that Ive tried all possible export methods and validated the xml file on the internet but nonetheless some versions could not be imported into Davinci Resolve, no matter if I exluded clips, removed all attributes, turned stereo into Mono and vice verca, used a clip without any edits. Sometimes when importing there was an error: "DOM parser error . Line ..." even if it was only a single clip.Apart from that the FCP Translation Results said: "Translation issue:Effect <MPEG Source Settings> on Clip <"Name"> not transla