Character Animator

See attached.RTX 5060 TiWindows 11 up to date.Drivers are up to date, I have tried gaming driver and desktop application driver.Every time I move the window, resize the window, or switch between stream or rig tabs the error pops up. It’s stopping me doing anything.

Hi everyone,I am using obs to window capture for my puppet into obs and then into my gaming lives. However I have a problem with using replays and triggers in that adobe character seems to require being the active window but when streaming I need to be in a different gaming window.

I used to be able to stream to Streamlabs obs at 60 fps no problem on previous versions of Character Animator but after the 3.0 updates it'll drop down to 10-12 fps when I turn on the stream option. I keep everything updated on my computer so I don't know that could be causing it to drop down in framerate. Even using the templates, the framerate drops.

I have a body group with 2 subgroups titled "torso" and "pants" with pants at the top. Inside the pants group, i have 5 sibling art layers. (top)Standing upright → Legs apart → Lean → Sitting → Bent Knees(bottom)I want to be able to press a single key so that the program will cycle through each version and only do so when I click that single key.I almost have this down, but it’s not quite right. Here’s what I have:I have the “pants” group set with a cycle layers behavior I think took that pants group, and create a single trigger so that when I click “0” on my keyboard, it activates the trigger. Then on each of the 5 art layers, I have “cycle pause” set up.This makes it so that when I click “0” the puppet automatically toggles/switches from “Standing upright” being visible to “Legs apart” being visible. And if I Click 0 again then “Legs apart” being visible toggles/switches to  “Legs Leaning” being visible. So on and so forth.The problem is that this setup is causing the legs to be invi

Hi,I have my character working and everything is set but I want to live stream now. (I'm on Mac OS btw)I have OBS but it turns out there's more to it.I've recently seen Okay Samurai's video on live streaming but it's from 5 years ago and the NewTek NDI Software and plugins are completely different all I could download was NDI Tools pkg.Now I have NDI Output but seems like I need a github download too called palakis/obs-ndi. However I can't find this.Is there any other easier solution? It's been 5 years can't I just straight stream my character from Character Animator to OBS?

Hi everyone! I've recently been trying to using the Pro features for character animator but have had issues with my character animator account recognizing that I have the Pro creative cloud subscription. When I go into "manage account" on my creative cloud dashboard it indicates that I have a Pro account and that they have received my initial payment for the month but then when I try to launch character animator it says that I am still on the starter account... Any advice is much appreciated!

For some reason everything is perfect and working as it should except for when I try to fix problems with the 2-frame Take which simply bends the elbows perfectly reversed in this case. I am using: https://okaysamurai.com/puppets/2023/Sticky.puppet as my puppet. Thanks for any help in advance! If you know a solution, please do tell and be verbose as I am rather new to Character Animator, thanks again!

I have a character with earrings that have dangle applied to them. The dangle works great during recording. I have various “scenes” on the timeline where the character changes position on screen using hold keyframes. For example, one scene he will be on the right of screen, and the next scene he’s center screen.On every one of these scene changes, the earrings show a huge distortion for about a second until the dangle settles into the new position (see screenshots).I know this is likely happening because of the sudden change in position of the hold keyframes. Is there any way to avoid this distortion or a different approach I should use to implement these scene changes?With earring distortion after the scene changeCharacter as intended 

I copied the base of the Tull puppet, replaced it with my puppet's movements and appearance, but suddenly its arms stopped moving, and its mouth didn't appear (the triggers seem to be working fine). And I can't get the voice sync to work at all (I tried with an audio track since I don't have a microphone or camera yet).Could I share my puppet so you can take a look?

While using specifically the motion library behavior my puppet head warps/ tugs while using the motion behaviors. The upper right side of the head is the only part that does not move causing the right ear to not move as well. I have watched numerous videos from Okay Samurai but it still is not working properly. I looked at the mesh layer to find a problem I’m not even sure what to look for lol. Any help would be greatly appreciated.  

I am trying to record a scene for a pre-rigged Adobe puppet called “Cowboy”.  The puppet comes with a number of shortcuts for poses and hand positions, for sad and angry and so forth.  I was recording the gestures during playback without problem.  Then I stopped to lengthen the cowboy track and the music track.  When I went back to record, the trigger icons no longer worked.  At one point, I got them to work a little -- but they only affected the bottom half of the character, while the full gestures  should have the hands waving in air and so forth.  In addition to this issue, I have had other times when the controls seem to have no effect for no reason that I can figure out.  Where am I going wrong?  In this case, I have made sure that the puppet track is selected and the control panel is in “perform” mode…. It’s just inconsistent.  It will work for a while, then it won’t. 

The electricity is out right when I was saving this file. Please someone help me recover it.Attached is the file.

When I go into record mode, the head is floating around when I use the motion library. I noticed when i click on the head it highlights the body. When I click the body it is still highlighted around the body; so it is double tagged. I even made sure that everything is named correctly. How do I fix this? Thank you in advance 

when i try to creat a hand swap it wont show up a hand, and the idea is keep those hands as they are know and then when she lifts to knock it shows up a fist which i already draw

Does anyone have a workflow for this yet?  I’ve seen a few comments saying you can use Claude and After Effects to help edit?  I’ve seen some Higgsfield and After Effects stuff but I’m looking for something specific for my editing workflow.For context I review movies using my animated character.Right now I’m using Character Animator Where I export my puppet and background into after effects.Once those 2 are in after effects I add the B-roll (from what ever movie im reviewing) and match it up to the right parts.My issue is thats it’s so much work, as I’m also adding in cuts to add sound effects and memes to make the video more engaging, but it’s a lot of editing takes me like 4 days sometimes, wanted to speed it up.Has anyone seen anything on this or have a good workflow?

Hello,  I created a custom illustration and having trouble getting the mouths to lip sync for me. I am new to character animator and hitting a road block here. Would love to know how others figured it out? I’ve created swap sets, tried meshing the body, a whole bunch and stumped. 

Hi, I’m pretty new to this, but I’ve been following a bunch of the online guides.  I’m working on my first character puppet.  It’s a supervillain character.  I was able to get an unmasked version (Overseer Puppet) imported with front and ¾ views and got it so that the head is attached to the neck and the neck stays put at the bottom so it naturally moves when the head moves.  However, I’m running into problems with the masked version.  He’s got a hood and I thought I had all the layers right, but the neck is bolted to the head and nothing I do seems to be able to pin the bottom down.  I’ve tried both with the hood (Overseer Masked) and without (Overseer Masked No Hood) and even though it’s rigged the same way as the unmasked head, the neck isn’t behaving right.  I’ve included my project file with (hopefully) all applicable media.  I did notice that when the hood is on, the neck picks up the layer behind it (per the contour).  My goal here is to have the hood attached to the head but pi

he zoom into the timeline is either centered on the play-head or I lose the cursor and it have to scrub to it. For a lot of changes it becomes a real bottleneck. Am I missing a trick?The ALT + mouse scroll isn’t the same as the - and = keys. It also doesn’t zoom in around the pointer. It isn’t working for me. Any hep would be appreciated. :)jb

Greetings Character Animator Community!I need some urgent help to make this Friday deadline. I recieved this error upon opening Character Animator.When the program attempts to open, this next error comes up.What has happened and what can I do? I haven't touched this software since last week, and the most recent thing I have done to my MAC was update the Ventura OS today with the most recent update this morning right before opening this project. This project is also being read off of an external G-RAID hard drive where it's lived for its entire life where no significant file or orginizational changes have been made. Is this a resolveable issue? Any help would be greatly appreciated! Thank you so much!    

La marioneta sigue bien mis ojos, mis cejas, y también cada vez que hablo, se mueve todo menos los brazos y las piernas, alguien que me pueda ayudar? es muy importante para mi trabajo

To reproduce issue:create head with dangle property on ears add transform property to head in scene, create hold keyframes of 100% and -100% on head “scale x” to flip head as needed when head is flipped -100% “scale x” the ears with the dangle property will start glitching I’d love to be able to flip layers for head turns etc. in character animator without losing physics, thank you.

My absolute favorite puppets are the Cupcake, mushroom, and the flower in Adobe express but I can only download and use the Cupcake with all it's fun abilities in Character Animator. I would absouletly LOVE to be able to download and use the mushroom and the flower. My nieces and nephews LOVE them.  Hope to see it on the download page soon! Love the program!