After Effects

Hello, I have a question.I have footage recorded at 30fps using an iPhone. When I edit it in Premiere, I render the output at 30fps as well.The problem is, when I import the footage into After Effects, it often changes to 24fps.When I change the comp settings to 30fps, the playback becomes slow.When I check the source footage again, it does say 30fps.I hope I explained it clearly.Does anyone know how to solve this issue?

Hope the undo and redo history will be retained even if you have saved a project file. As of the moment, the undo and redo functions are disabled and the history is cleared once a file is saved. I always lose significant change allowance once AE saves/autosaves a file. Like all of the history is gone.

Does After Effects have an animated paint tool like the user friendly program "FlipaClip"? If not, can anyone recommend any third party AE plugin that has that feature? I'm seeing a lot of animated war maps on youtube that appear to be done with the program "FlipaClip". These animated war maps show frame by frame paint strokes usually illustrating an invading red layer over a conquered blue country: https://youtu.be/jGe7sG3N-Qw?t=109  Thanks very much in advance for any help or advice with this. 

This color stripes representing selected color only. I do not think there is other use to this. How can I switch off this color stripes?     

Is there a way to enable audio scrubbing when moving one frame at a time with the keyboard?As opposed to holding Ctrl/Cmd while scrubbing with the mouse.

Hi everyone,I have encountered a strange problem after updating to after effects 25, the render time is a LOT longer than usual. Some renders jump up to 200 plus hours long.  I tried reverting to AE 2024, but that didn't help. I have also tried exporting from multiple different computers and starting a new AE project but the issue still persists. the only way I have found to reduce that excessive render time was to remove almost all effects, which I would rather not have to do. Has anyone else encountered this? Or has any advice to help?  Original animation:- Total time: 4minseffects: adjustment layers, noise, point light, 3D objects, blurs, orientation wiggle, drop shadow, rough edges. - export time: 150+ hours  What I was able to get it to:- Total time: 4minsIts basically a slide show (with no audio) of images fading in and out with an orientation wiggle effect, drop shadows and rough edges.- export time: 4hs  My PC:CPU: Ryzen 9

I kept seeing this request on the forums and while it felt like it should be possible in After Effects, I couldn't see a way to do it without needing to spend additional money.   This method uses After Effect's native Advanced 3D renderer, Expressions and Shape layers to let you create and animate arcs from one point to another.   The expressions used look complicated, but really just boil down to school trigonometry. Using Cosine and Sine equations, I was able to create Latitude and Longitude that allow me to move a null object anywhere on the imported 3D model of the Earth. Then using parenting, 3D layers and the Length and LookAt functions, I can add a shape layer that has its anchor on one null and has its other end on the other. With that, it's a simple matter to add Trim Paths and extrude the geometry. And if that sounds complicated, don't worry because I cover how to do it all in just 10 minutes.   Once done, you will be able to create flight paths or travel lin

hello all i am dr sourav malhotra from jammu, india, i want to learn about editon motion graphics that i can uise toshow my dental treatment videos, i have asked so many influncers but no one is ready to help and thery run courses for a hefty amount of money. can anyone help me to unlock this video, like this effect that he used in this video, i have tried saber effects buyt its not that. please help.https://youtube.com/shorts/tqplq9xOZ6s?si=xBoWmU91o9qXA9Ee

System Specs:  Macbook M2 ProMax, 64 GB RAM, 1 TB StorageAdditional NVME External Drive (holds Media)Additional NVME -WD Black (fast. fast) for cache Currently my preview runs about 4 frames and then wait 15 minutes another 2 frames, I go for a jog come back... 20 whole frames rendered, still 8000 more to go.... Frustrated obviously -  Tried different configs, moving location of cache, media, conformed media cache (what is that anyway??) and database.  Tried preview settings, skip frame, disable multiframe rendering, devoted almost my entire system to AE.  My hair is falling out.  Help 

I don't know how to use this transition! Please help!

after effects crashed on me just now and when I open it back up it says "after effects cant continue: an unexpected error has occurred and AFter Effects will not shutdown. Please check you have the appropriate permissions to launch After Effects as well as read/write acess to the After Effects preferences folder. If any other error messages were displayed prior to this, please review and resolve if possible." I noticed that AE updated itself last night. Looks like auto updates were turned on. I bet this wouldnt have happened if auto updates were turned off. I cant get back in. Going to need to have someone remote in AGAIN to fix it. adobe remoted in to fix it. I asked what caused it. They said: "I understand, whenever we close the AE on any project it tried to open that project again whenever we again open the application. That's why it was not opening and was showing the permissions the reason it was showing the permissions because it was locating the project which not connected.

 As mentioned in the title, I discovered an issue where the borders between the object and the background become contaminated after rendering a video.To investigate, I conducted several tests:First image: Apple ProRes 4444 8bitSecond image: QuickTime Animation 32bitThird image: PNG sequenceFor the test, I placed a solid background at 1920x1080 resolutionand positioned a 960x540 red-colored shape layer exactly at the center.This was done to achieve a perfect 1px:1px match.(The rendered videos were captured as BMP screenshots and then magnified for observation.)While working on an outsourced project, this issue was found around a logo,and the client raised a complaint.I attempted to resolve the issue, but while the PNG sequence had no problems,the final delivery must be a video file with audio, as it is an advertisement.This puts me in a difficult situation.

The adobe after effect said that i have low memory when its not even trying to use my ram what the hell, when i hit play its just repeat and stuck, i tried all the tutorial, purge, locate more cache, everything but nothing changed

I'm experimenting with Automation Blocks to automate the building of comps for my teams workflow... Here's what I have figured out:I can automatically build a project bin "Output" with 4 comps at 4 different sizes (1920x1080, etc), then build a "PreComp" bin with the precomps we will need - Logo Intro comp, offer precomp, text precomp and rtb precomps...I have that down and working, utilizing the setup I screenshot. No problems at all there.Now what I'm struggling with is the following:I want to automate taking the comps in the PreComp bin and inserting. them into the output comps at particular times and even sizing/placements. "Logo Intro" would be placed at the 0 frame at say 100% scale, centered in the comp... "Offer Precomp" would be placed at the 2s mark, 50% scale. Then "Headline" precomp would be placed at the 6s mark, and so on. I'd imagine I can use "set attribute" to place precomps in a particular location etc., but I can't figure out how to start placing comps like

I parented the position of the puppet pin 'L1' to the null layer 'L1',and the pin 'L2' to the null layer 'L2'.The expression used is: thisComp.layer("L1").transform.positionThen, I parented both null layers 'L1' and 'L2' to the null layer 'L' to control them together(using the pick whip in the "Parent & Link" section to link the layers themselves, not just the position).However, the control doesn’t work.The null layer 'L' does not affect them as expected.

Can templates created with Essential Graphics be used in DaVinci in the same way as in Premier?

Hello! First time posting in this forum so apologies if I'm missing anything to provide a helpful discussion. I'm working on a balloon head made out of individual Xs which are all in individual layers. Since there's quite a few layers, I was hoping to somehow connect the position of each X to a null object in it's center that would converge/diverge to simulate the balloon popping. Additionally, the artwork is not symetrical, so I don't believe I would be able to use mirror effects to achieve what I'd like. My first thought was to create an expression with the position of each X related to the null object's scale, so that they would hopefully radiate out in different directions based on their starting position in relation to the null. I'm struggling to know where to begin in writing an expression for these properties. Potentially using the difference in scale to move the position by a certain factor, but I'm unsure how to make a universal expression to move the Xs omnidir

Guys, has anyone noticed this color change after updating to 25.2?For some reason, some assets I import into After Effects have their colors altered, and I don’t know how to fix it.I know the update included some changes to color management, but I didn’t touch any of my settings and I’m still running into this issue.I’ll send my color settings below — if anyone knows how to fix it, I’d really appreciate the help.This only happens in After Effects. When I use the same asset in Premiere Pro, the colors stay exactly how they should. The first one is from After Effects, and the second one is from Premiere Pro.  You can notice that the blacks have been lifted, and some transparent assets have had their colors changed. In some cases, noticeable borders appear where there were none before.  Here it is my color settings   

Hello,when I edit on my 16 inch laptop, I need more space than on a big screen,and I noticed that this "UI design", when only one unneded button (I can press TAB when I need it) takes too much empty space,could you please fix it, or place it inline with above or switch it off, or make a preference to hide it? 

Everytime I try to start AE, it boots, and then a message appears saying: "AE  Crashed occurred while invoking plug-in AEDyanmicLinkServer", and it shuts daown again. I've tried several clean installs, and nothing. I'm unablle to use Ae, and I'm starting to panic, because deadlines dont wait. Can anyone please help?  

I'm trying to upload a PSD to an After Effects project for an animated short film I'm working on. This file is for a background where it's a shot of the floor. It has a pair of layers with simple brush textures. (Layer 1: orange)(Layer 2: purple). When I view this in Photoshop, it has the intended effect where the purple and orange mix together in the texture to make red highlights. When I import this same file to After Effects, the orange and purple do not mix.I thought this must be an issue with the color profile, but I've been screwing with it for a while and nothing works. I'm importing the PSD through "Composition - retain layer sizes" and then "Editable Layer Styles" if that means anything.

I have confusion over Rasterizing. Rasterizing means process of converting a vector or smart object into pixels. Vector images are more clear than pixel image when zoomed in. But here after Rasterizing only images get more clear. Why is it called Raster?      

I have footage that was accidently recorded with "Focus Peaking" information baked into it that the client would like to see if it could be salvaged. I have included 3 stills that contain the issue and a 4th that is clean without the peaking information turned on.My question is it possible to fix the video using some of the newer AI features in After Effects or other CC software. Currently, I have let my Creative Cloud membership lapse since I'm busy in Avid world and would rather not pay to experiment if the job is impossible.    Any thoughts would be appreciated.

I've been using a Wacom tablet for 7+ years (first a bamboo, now an Intuos pen & touch) in place of a mouse for all my applications. Just in the past month, when I open After Effects, after about 3-5 minutes of use, I'm no longer able to move the cursor using the pen. If I click down, I am still able to click and drag, and in the Wacom diagnostic tool, everything looks perfectly fine. The problem is, the functionality stops across ALL applications and I can't get it back unless I fully restart the computer. This means once I open After Effects, i must switch to a mouse until I have a chance to fully restart my computer, and then I can't open After Effects without breaking my pen tablet's functionality.  Tried calling Wacom support and all they had me do was uninstall and reinstall my drivers several times. I tried moving my tablet to another computer (Brand new 2020 Imac, fresh install of the newest AE) and am still having the same issue. Is this a bug? Is my tablet broke

After effects error couldn't find main entry point for deflicker.x ( 48 72 )I do have two machines with the same after effect version and the same version of the plugin and still cannot work in one of them. I've tried to OpenCL.dll thing, the clean after effects open with alt+ctrl+shift, etc.I don't know how can i make this work by now... after effects 2024 don't worked eitherI'm really tired of this kind of errors in after, it's really anoying needing to find solutions for this kind of things, Jesus, i just want to get my job done