Bug Reports

I recently updated my Premiere & After Effects to 25.6. I would normally duplicate my footage in my sequence on the above layer, then right click and click "Replace to After Effects Composition." Normally, it would place the footage in the After Effects software, but now it doesn't show it at all. Is there a fix to this?Photos included.  

I am facing a serious issue with Adobe After Effects. As soon as I open my project, After Effects starts hanging and becomes completely unresponsive. Along with the software, my entire PC also starts hanging and I am unable to do any work. Please help me resolve this problem as soon as possible.

Hey everyone,Since this morning I’ve been encountering very unusual problems with my After Effects, Premiere Pro and parts of the Illustrator UI (haven’t tested any other apps).Whenever I select a panel it immediately looses focus and deselects itself. Trying to rename any type of item or clicking on any type of value immediately looses focus as well.I’ve tried the following to fix it and was wondering if anyone else here encountered the same issue and might know how to fix it.• AE Reboot + System Reboot• Safe mode• Reset all preferences• Remove plugins and extensions• Changing to AE 25.5, 25.6, 25.1• Deleted everything in ‘/Users/username/Library/Application Support/Adobe/Common’ (Fixed lots of cache problems in the past)• Turning off PC for a longer period of time & unplugging power• Updating MacOs 15.7.1 => 15.7.2• Changing Keyboard & Mouse• Checked and toggled all kinds of security, accessibility and after effects settings• Full AE Uninstall and Install• Full uninstall o

Unable to search or input values on layer properties within the current build of After Effects. Every time I try to select an input text bar (i.e. search bars, input value boxes, etc.) it immediately cancels out, not allowing to type. Search bars and input text bars work when panels are un-docked but within the workspace. I've tried:RestartingReseting PreferencesRe-installing After EffectsReseting WorkspacesUn-installing pluginsUnfortunately the problem still presists, has anyone found a fix for this?

issue with aftereffects UI displaying on a pc, 2024 works fine, installed 2025 and this is ewhat i see, the preview screen works fine, the rest of the UI is doing this, if you randomly click in the screen you can see that everything is there you just cant see it.   

I cannot activate any numeric fields by clicking on them (Position, Rotate, Opacity, Scale, etc.), to type in numbers — only scrubbing changes the numbers. This issue happens in all projects, in new comps, and even in a fresh user account on macOS.Prefs reset, workspace reset, Safe Mode (no plugins), and rolling back AE don’t fix the problem. Both trackpad and external mouse are affected.System Info:macOS: Sonoma 14.6.1After Effects: 25.6 (tested with older 25.2 also)Keyboard Input: English (“A” in menu bar) Steps to Reproduce:Open AE, create or open a comp.Try clicking a numeric field (e.g. Position, Scale, Rotation, etc.) for any object.The field does not activate for typing.Try resetting prefs / workspace / switching users — issue persists.Impact:Makes precise numeric input impossible; critical for motion design work. Request:Please investigate this as a potential bug in AE 25.6’s UI interaction with macOS Sonoma 14.6.1 — it needs a fix in a future update.

When using After Effects I'm unable to use dropdown menus to change things like quality, size of my composition on screen, and other dropdown menus I have from scripts. The dropdowns are still there but when I click on them nothing happens. I do have third-party plugins/panels installed and I am on Windows 11 24H2 with a Ryzen 5 5600, RX 6600, and 24gb of RAM.

Meu After e meu Photoshop estão com esse bug, ao clicar com o mouse em algumas áreas, simplesmente não abre e fica bugando o clique. O bug acontece apenas nos aplicativos, no computador, navegador e outros problemas não acontece, estão normais. Tenho todos os drivers atualizados, tudo atualizado.

Hello Adobe Support Team,I am experiencing an issue in After Effects 25.6 when working with 3D layers and multiple screen views (Active Camera + Custom View). When I enable dual views, the preview panels freeze and do not update, although the main program remains responsive.Note: I do not encounter this issue in After Effects 2024.I have tried:Reducing resolution and enabling Adaptive ResolutionPurging memory and disk cacheResetting preferencesUpdating GPU driversDespite these steps, the issue persists.Could you please advise if this is a known bug and suggest a solution or workaround?Thank you for your support.Best regards,

Have seperated all my files in illustrator but when I import into after effects, only some of the layers are imported from the artwork. There is no error message they just will not be added for some reason?

Hello, I have a bug on: 1. After Effects V 25.3.2 (with Neat Video plug-in)2. on Mac Studio 2022 (M1 and Sequoia 15.5) and MacBook 2019 (Sequoia 15.6).3. DNG Sony FS7 camera RAWs, which I open in AE in: All Files/Camera Raw//Camera Raw Sequence.4. The expected result is colorimetric conformity between Camera Raw and After Effects (a workflow I've been using for 8 years without any issues until now, but stopped using for at least several months). The actual result is a completely different colorimetry in After Effects (see visual 2) compared to the desired colorimetry set in Camera Raw (see visual 1). This either manifests itself immediately in the case of the Mac Studio, or for the MacBook Pro after changing the frame rate, for example, in Interpret Footage/Frame Rate/Conform To. I wanted to attach three DNG files to simulate the sequence, as well as the XML file for the RAW camera settings, but I got a site error: The content type clip0000132_0000000.dng in the attachme

Hi. I’ve encountered an annoying parenting bug in my project. I created a simple position animation on the parent layer, and when I try to adjust the keyframes on the timeline, the child layers behave as if I never changed the keyframes. Even when I try to unparent them, they still move as if they’re still linked to the parent layer. 

AE, PP and Media Encoder are often eating all of my 128gb of RAM. I'm not doing anything special to make this happen, just using them as I have for 15 years. Just opening Media Encoder and it sitting idle is currently consuming 25gb of RAM. I will put this down to generally appalling performance I'm getting on this release across all of the video apps. I have never, ever seen any software perform so sluggishly. Black frames, glitches, random upside down frames. It's absurd. What is going on at Adobe? 

In previous versions of After Effects, when using the Rotate Tool (W), holding Shift would constrain rotation in fixed increments (by default, 45°). In the latest versions, this “angle snap” behavior seems to have been removed, and holding Shift no longer locks rotation to specific angles.This feature was extremely useful for precise alignment and fast workflow. Could you confirm if this change was intentional? If so, is there any way to re-enable it, or could it be added back in future updates? Also, is there any keyboard shortcut or alternative method that replicates the old behavior?

Básicamente me pasa con un cliente para quien edito videos.Al principio el archivo va bien y se ve perfecto pero según pasa el tiempo y voy editando no se porque el video empieza a traerme fallos y a romperse lo cual es rarisimo. No se como solucionar este problema.  El video crudo se ve perfecto no tiene esos destellos de luz.  Tampoco tengo alguna capa superior que moleste o provoque ese tipo de flash raro. 

Okay, so I have a huge problem that I've been trying to fix for days, whenever I click on anything inside of my project the whole screen just flickers and when I use effects, it flickers, basically just when I do anything, it flickers like crazy, even when I'm previewing. There's a video attached to this post where you can see the problem, I really hope someone can help me🙏

After opening windows, they always position themselves in the middle of the application on the main monitor (I work on two monitors).The attached video shows exactly what is going on. It does not only concern the color palette. It is a general problem.

1. After Effects Version 25.0 2. Windows 11, version 24H2 3. Audio error such as jumps, muted, and glitch. Played the original audio file in the explorer and it's all good but in the AE the audio experiencing errors both on the previews and rendered. Tried to clear cache, reset preferences and even reinstalling but still doesn't work. 4. Please fix this bug. I've attached the rendered audio.   Title edited by Mod.

Hi,I have a new problem. I'm using Adobe dynamic link in Premiere quite often, and it almost always works just fine. Today, I used it just as always, and suddenly, the imported footage into AE got really overexposed. I tried to import the same footage directly to AE (without Premiere), and I had the same problem. It is not possible to work with it. Even when I tried to dial it down with Lumetri color, it didn't work. Those whites behave like they are just blown out. But they are not as you can see at screenshots. It is footage from A7IV in Slog3 (it does the same with LUTs on it).

I think I found a bug; here's an AI assisted report:Bug Report: UI Fails to Display Correct Values for Expressions Combining posterizeTime(0) and sampleImage()Product: Adobe After Effects  Version: 25.3.1  Operating System: Windows 10SummaryWhen an expression utilizes posterizeTime(0) in a chain that includes the sampleImage() function, the After Effects user interface (UI) fails to display the correct calculated value for the affected property. Instead, it shows a "default" value (e.g., black for a color swatch, or 0 for a scalar property like Opacity). Critically, the underlying render engine correctly calculates and uses the accurate value, ensuring that the final render is correct. This bug is exclusively a UI display issue. This can be verified by displaying the property's real-time value on a text layer, which consistently shows the correct data despite the erroneous UI display.Steps to ReproduceBase Setup:Create a new composition.Create a solid layer (e.

PORFAVOR SOPORTE DE ADOBE QUE ALGUIEN ME AYUDE NO ESTOY PUDIENDO TRABAJAR! Mi video titila y esta bugueado, que es lo que sucede? Desde el día de ayer que tengo este inconveniente.Los 2 videos que muestro el video crudo esta perfecto no tiene esos flickerings. El día de ayer me paso exactamente lo mismo.No hay ninguna capa por encima que le afecte no hay nada.  Puede ser algo relacionado con las preferencias que toque en Adobe After Effects? Puede ser algo de almacenamiento y me produce ese bug?Puede ser algo relacionado con el 3D? No tengo forma de solucionarlo y es muy extraño.Desinstalo el After Effects? Reinicio todas sus preferencias?PORFAVOR SOPORTE DE ADOBE QUE ALGUIEN ME AYUDE NO ESTOY PUDIENDO TRABAJAR! 

In After Effects Beta 26 on Windows 11, when I use a protected region marker and scroll the timeline, the left side takes the color of the first protected region marker. It disappears weirdly when I hover my mouse.The behavior starts when I scroll the timeline to the right, where the layers or timeline go behind the left panel or layer properties panel. At that moment, the panel takes the first marker/protected region label color, and hovering my mouse over it makes the color vanish at that spot.I can also draw on it in circles to try to remove it faster, but it behaves inconsistently. 

Hi! I have this error come up when using AE 25.5. It's been days and I've been through the basics of troubleshooting to no avail. When I go open up the software, the splash screen doesnt pop up. Instead a series of pop up messages come up. When following the prompts of these pop ups all windows close and the application doesnt open. I'm not trying to open a file. Im trying to start a clean project, but even then I am unable to get past these messages. System Details:Windows 10 (build 19045)Nvidia Gforce 1660 OC (ver 581.57)Ryzen 5 3600After Effects ver 25.5Adobe Creative Cloud 6.8.0.821 Steps already takenUnisntalled Creative Cloud and After EffectsManually deleted foldersCleared RegistryRemoved third party pluginsReinstalled After Effects and Creative Cloudtried starting on safe mode (ctrl+alt+shift- no difference)Reset preferences (no difference)Updated my drivers These are the windows that pop up upon trying to launch AE All the options on the first prompt window

Hello,I'm experiencing a consistent crash when using 3D models in After Effects. Below is a detailed log of the troubleshooting steps I took with an AI assistant to try and solve this. I am posting the AI-generated text directly. I'm posting this here hoping to find a solution. 1. Post Title Advanced 3D crashes (even after clean reinstall) - NVIDIA RTX 4060 Laptop 2. My Environment OS: Windows 11 Pro (Version 25H2 / OS Build 26200.6899)After Effects Version: Latest (25.5) and 25.3.2CPU: 13th Gen Intel(R) Core(TM) i7-13700HRAM: 32.0 GBIntegrated GPU (GPU 0): Intel(R) Iris(R) Xe GraphicsDedicated GPU (GPU 1): NVIDIA GeForce RTX 4060 Laptop GPUNVIDIA Driver: Studio Driver Version 581.57 (Before testing) / 581.29 (After testing) 3. Problem Summary After Effects consistently crashes when I try to enable the "Advanced 3D" renderer. This happens when importing a 3D model or simply enabling the 3D layer switch on a shape layer. The error messages are either "After

I'm having an issue with AE where it clips my white values when I put any effect (exposure, hue/sat, etc) on my layers. Even negative exposure of -.01 will suddently clip the whites. It's like it turns it into 8bit instead of its native 32.Project color settings are OCIO Aces 1.3/32 bit / working linear ACEScg.,Sequence is a 32bit ACEScg exr, interpreted as ACEScg,viewport display is set to sRGB Display/ACES 1.0 - SDR Video (tried others too). Also tried None and have been  using the OCIO display transform on an adjustment layer.Raw Sequences look great, but when I put an effect (like exposure) on some sequences directly, I notice whites get capped with barely any adjustment, even negative adjustment of exposure.Weird: I can buffer the entire animation with capped (wrong looking) whites, and in the OCIO Display Transform effect, if I hit 'reset' it will 'fix' the entire sequence once. So it looks perfect. If I adjust a single thing, it re-caps all whites. Hitting reset again fixes