Bug Reports

.tif file appears washed out only in Photoshop Beta with GPU enabled. The same file displays correctly in regular Photoshop. Turning off Use Graphics Processor fixes the appearance. 

Photoshop (Beta) — Remove Tool Performance RegressionI'm reporting a specific, reproducible regression in the Remove tool in the current Beta build (27.10.0) that I've diagnosed as thoroughly as I can from the user side.SummaryThe Remove tool, which previously worked quickly and well in this Beta build, has stopped functioning correctly. It now takes several minutes to remove even a tiny selected area, regardless of settings. The same operation completes instantly in the standard (non-Beta) release of Photoshop on the same machine, same file, same hardware.TimelineThe tool was working correctly. At some point it stopped — without any update on my part (no Photoshop version change, no graphics driver update, no known Windows update). I cannot pin down exactly when it broke, only that no deliberate change preceded the failure.SystemNVIDIA GeForce RTX 5070 Ti, correctly detected in Photoshop's Graphics Processor Settings, "Use Graphics Processor" enabled, GPU used normally elsewhere in th

Photoshop Beta 27.11.0 20260902.m.3662 8045dad x64Windows 11 64-bitThe new Light adjustment layer does not always render correctly in a linked PSD when Layer Comps are being used.I have a PSD placed as a Linked Smart Object inside a master Photoshop document. The linked PSD contains a Light adjustment layer using Exposure and Shadows.The Light adjustment looks correct when I open the linked PSD itself. When I save that PSD, the master document correctly detects the change and refreshes the Linked Smart Object. Other changes from the linked PSD update correctly, but the Light adjustment does not appear.I can force it to update with this workaround: Turn the Light layer off. Update the Layer Comp. Save the linked PSD. Turn the Light layer back on. Update the Layer Comp again. Save again. After doing this, the Light adjustment appears correctly in the master document.Expected behavior: the Light adjustment should render correctly in the master document whenever the linked PSD an

Dark Grey Interface creates screen flickering and makes the screen darker both in Beta and PS StableSetting the UI back to normal light grey seems to fix the issue, but I prefer working in dark grey.  Windows 11, PC, Dell Laptop.   

When opening the Brush tool at the Options bar, roundness appears at 0% with any brush. It works when fixed, but as soon I open again, it returns to 0%. It's not the case when opened with the brush panel at the left, there it works fine.

Hi, since a few days when opening Photoshop, the keys don't work properly. I can't use CTRL+N or +O for a new file or to open a File. When I open an image by mouse, I can click on the tools and rename the layers for example. But I can't use the keys to select the tools or to increase/decrease my brush. The Function keys still work so I can show/hide my layers/colors etc. Anyone an idea? Already went to Preferences/Tools and turned on/off Spring-loaded Tool Shortcuts, that didn't do the trick. Also tried booting in Save mode and clearing all preferences to defaults..  Nothing works. If I open Illustrator, the keys work.   Anyone an idea? This drives me crazy 😞

When using Cmd shortcut to auto-select, when group is selected it selects layers, when layers is selected it selects groups

Finally fix the bug where, when working with smart layers and going back to the main layer that contains the others, it doesn’t remember the changes made!

I go into Adobe Photoshop Beta, and write a prompt. I use Generative Fill Nano Banana 2.5 to create an image based on my prompt. Canvas is 1920x1080 72dpi. Looks generally fine when the image is created. But when you save it as a psd, and then go to the finder level on mac where the files lives and highlight the file and press space bar to view it as a preview, it’s kind of soft focus. It’s hard to describe. It just doesnt have that sharp crispness HD-ness that a normal high res image would have. I want to say its blurry but thats not quite the right word. I can share a private image but cant post it here. 

Photoshop version: 27.9.0 BetaComputer: MacBook Pro M1 ProOperating System: macOS Tahoe 26.5.1aIssue:Smooth gradients and dark vignette backgrounds display with blotchy, cloud-like artifacts when Use Graphics Processoris enabled.Steps to reproduce:Open an image with a smooth dark gradient or vignette. Enable Preferences → Performance → Use Graphics Processor. Observe blotchy artifacts in the gradient. Disable Use Graphics Processor. Reopen the image.Result:The artifacts disappear immediately when GPU acceleration is disabled.Additional information:The same JPEG and TIFF display correctly in Lightroom Classic. GPU Compatibility Check reports the Apple M1 Pro as fully compatible. Changing OpenCL and GPU Compositing individually does not resolve the issue.

When using Generative Upscale in Photoshop, the feature modifies text that is already embedded in the image and distorts line drawings and other precise graphic elements.This is not editable text on a separate text layer. The source is an existing flattened PNG file in which the text and line art are part of the image pixels.During upscaling, Photoshop changes individual letters, makes text unreadable, and redraws some characters incorrectly. Thin lines, outlines, and detailed line-art elements are also distorted or replaced with inaccurate shapes. As a result, the upscaled image is less accurate and often less usable than the original.Steps to reproduce:Open a flattened PNG containing embedded text and line art. Run Generative Upscale. Compare the result with the original image. The text characters and line-art details are altered or distorted.Expected result:The original content, letter shapes, line structure, and graphic elements should remain unchanged. The feature should increase

Bug courbes personnaliséesLorsque j’importe mes fichiers de courbes en .acv, je peux les utiliser de suite, en revanche dès que je ferme le logiciel et que je veux réutiliser les courbes précédemment importées, j’ai cette fenêtre qui apparaît et qui supprime mon paramètre de courbe personnalisé. Je dois donc les charger à chaque nouveau lancement du logiciel.

Photoshop Beta 27.9.0 (macOS) – PSD becomes unreadable after "Stamp Visible" (⌥⌘⇧E) and SaveEnvironment* Photoshop Beta Version: 27.9.0* Operating System: macOS* File size: approximately 291 MBDescriptionI created and edited a PSD normally in Photoshop Beta. There were no crashes and no Beta update between editing and saving.The final action before saving was creating a merged visible layer using the shortcut ⌥⌘⇧E ("Stamp Visible" / "Merge Visible to New Layer").Immediately afterwards I saved the document using File → Save.Since then the PSD can no longer be opened.Photoshop displays the message:"The document could not be opened because it is not compatible with this version of Photoshop."I am using the same Photoshop Beta version that created the file. I do not have another Photoshop version installed.Another PSD created on the same day opens without any problems.Additional observations:* The PSD file is approximately 291 MB.* The file was saved directly to the local disk (not cloud s

Product: Photoshop Beta 27.9.0, 27.10.0 (and previous version .8?)OS: Windows 11 Pro 25H2 26200.8655If the image is in Greyscale Mode, choosing the Selection Brush shows a circular selection brush as expected, but holding down the mouse button doesn’t select anything - no magenta overlay is shown, nothing is selected. Switching to the Marquee Tool confirms that nothing was actually selected.  Converting the image to RGB immediately makes selection brush work properly.  Converting it back to Greyscale makes it stop working immediately, nothing else needs to be done. Selection brush hardness and opacity are at 100%, size doesn’t matter. This has been working fine for years but broke about a week and a half ago.It still works correctly in Photoshop Mainline 27.8.0.

Clone Stamp Tool brush preview disappears and turns into a mouse pointer on new layers (Windows Beta) It's both version 27.8 and 27.9. App version: Photoshop Beta (Windows)OS: WindowsIssue Description:When using the Clone Stamp Tool (S) on a newly created blank layer, the brush circle preview completely disappears and changes into a mouse pointer/arrow instead. This makes it impossible to see the brush size or the area I am sampling.Steps to reproduce:Create a new blank layer above the background layer. Select the Clone Stamp Tool and set Sample to "Current & Below" or "All Layers". Move the cursor over the canvas. The brush ring disappears and turns into a mouse cursor. What I have already tried (but did not work):Checked Caps Lock (It is turned off). Changed Layers Panel Options -> Thumbnail Content to "Entire Document". Closed and reopened the Layers Panel. Reset the Clone Stamp tool settings. The issue persists only in the Beta version when working on a new layer. Please hel

In Adobe Photoshop, the updated Canvas Size dialog fails to record relative dimensions when recording an Action. This works correctly in 27.3.1 (Release), but is broken in 27.4.0 (Beta). Steps to reproduce Open any document. Create a new Action (in the Actions panel). Click Record. Go to Image → Canvas Size… Change the units to millimeters (mm). Switch the size mode from Absolute to Relative. Enter values: Width: X mm Height: Z mm Click OK to apply. Stop recording.  Expected resultThe Action records a Canvas Size step with parameters: With Relative Width: X mm Height: Z mm Horizontal: Center Vertical: Center Extension Color: Background  Actual result (27.4.0 Beta)The Action records a Canvas Size step with: With Relative Width: (blank) Height: (blank) Horizontal: Center Vertical: Center The Width and Height fields exist in the recorded step, but their values are not saved (empty).Adobe Photoshop Version: 27.4.0 20260201.m.3398 df09e8f  arm64 (b

Hi, why can't I use removal tool on-device on Photoshop beta 27.7.0 Release (the device option is dimmed) even I meet the requirements, the GPU I currently used is Geforce RTX 5070 Ti 16GB and have enough HD space ?

in the previous version they worked, but now there is no change whatsoever when applying any of the parametric filters to an image.

Photoshop 27.6.0 Beta - using Find Distractions General.....I often get this error "288b8e.122".  It occurs when I run the General Distraction finder, and then select a particular kind, e.g. vehicles......then I used the ⌘- key to try and brush away the removal on, say, one of the vehicles leaving the rest - and it faults.  If I let all the vehicles run, it removes them all - so it has to do with trying to remove part of the selection.Start the Find Distractions | General Tool - on an image with some vehicles and other distractions When complete, turn off / select none; then just select the vehicles option Using the ⌘--key, brush away one of the vehicles and then confirm with the check-mark  Watch for the error “288b8e.122” Try again - but do not edit the generated masks…..seems to run okay  

If you go into the channels, double click a channel and get this pop box for options.  The way it used to work was, when the box popped up, you could press tab and it would move focus to the next section, “Color Indicates”.   When it landed in that section, it would automatically select the first option, “Masked Area”.  Using the down arrow key, it would select the next option, then the next.  So you could move through this dialog very quickly, without using the mouse.  It worked like that for decades.  In the last 5 or 6 years, You double click the channel, you press tab, it jumps to the “Color Indicates” section, but does not automatically select the first option, it just sort of hi lights it.  At that point, you could press the spacebar to make a selection. Then you could use the up/down arrow to hi light an option, then spacebar to select it. That worked well enough that I didn’t complain.  It used to move through the options as fast as I pressed keys.  Then, it got slow.  I press

  So as you can see, it's a PG-13 relatively inoffensive image of a woman in a bunny outfit. The top worked fine, and I was able to complete the top ear, which is cool. When I tried to extend the bottom with generative fill, though, I got this warning. They're just a pair of legs wearing stockings, and I wanted to extend it. It feels like a false flag - though I could be wrong? I find myself thinking it would do the same for women in swimsuits. Figured I'd share here.

When I choose “Export as” from the file menu, or rightclick in the layers panel to export a layer, the window that pops up for exporting just says “An unknown error occurred” and I cannot select anything.  I just updated to beta 27.4.0, and this seems to be happening on every document. This also only seems to be happening if I have “Use Legacy Export As” Selected under preferences?  I need the legacy mode to be enabled considering Adobe made some weird changes to how their PNG8 exporting works at some point, I need the legacy version to preserve the alpha channel on those.It still does Quick Export to PNG correctly, even if I have both “Legacy mode” and “export as 8bit” on the Quick Export as PNG option, so it at least seems like file type that isn’t part of the issue. No idea what is though. Extra note, I saw someone with a similar problem where theirs freezes when they switch to JPG, so it might be good to note that my dialog window is defaulting to JPG momentarily before the error p

Nano banana taking longer / endless generation and sometimes showing "something went wrong"  

Select layer, add layer mask (ensure layer mask is selected), select gradient too and ensure options set to linear and black to transparency with black in the foreground. There is no gradient to transparency - only a vertical line as shown in the attached. In addition adjusting the points of the gradient does not update the gradient positions. It used to work fine until recent releases.