『アドビコミュニティフォーラム』に質問/トピックを投稿する方法
The official community for Captivate.
新着順
Hello - I've Captivated 70+ slides, and reailzing I forgot to select advance slides automatically and instead selected 'on mouse click'. Is there a way to update this after I have already finished the course?
I've been updating courses into a newer training template design (both files are in version 2019). When I copy over text, slides with text, or quiz questions with text it causes problems with the new file. These problems don't show up until I saved the file, closed and then reopened the file. Once it's reopened all of the text in the whole project is invisible. I can see the text in the slide view on the left, but when I click on the slide it doesn't display any text until I click on the text field itself, then it magically appears. Also, when I preview the course all of the text is gone until I have clicked on every single text field in the course then I can preview it and the text will be viewable. Unfortuately this is not a solution because if I save and close the course, once I open it up again the text is invisible again and I have to click on every single text field. This really seems like a technical problem and it makes transfering slides a big pain!
Hi, I have read some of the answers but still have some questions about changing the font. I am a non-English speaker, so perhaps you could go into a little more detail, thank you very much. The software version I am using is CP 2019.For example, I would like to change all the fonts from Arial to calibri. All of my Style Name of text caption is +[Dafault Caption Style], next I select a text caption and change the font of the text inside to calibri, and selcet "Save changes to existing style". The next step is to select the text caption in the other pages and click on "Reset Style". So I still need to repeat the operation many times, do I understand correctly? Is there a more efficient way to do this?Thank you for your time!
I was working through a Lynda course on Captivate when asked to Preview "from this slide." When I do, I get a blank, black screen with a spinning wheel (see screenshot). I've tried this both on Chrome and Safari. I've uploaded a screencast too if it helps. The weird thing is that it previews for some files but not others. I'm using the files provided by the course so it should work. Any suggestions? [embed]https://youtu.be/EX0lKWaOMdU[/embed]
Hello, I am trying to jump to different pages in a quiz from an external URL. Is there a way to achieve this? When I publish it online, it only has the index.html page and not individual slides to link to.Thanks
Hi,I am struggling with the function, that after re-opening course, captivate is always asking whether the user wants to continue with the course or want to start from the beginning.How can I avoid this message and always start with continue at the last point which is sent by the LMS? ThanksMatthias
I notice with Slide Videos you can control the start and stop point of the video, however I cannot find a feature that allows this with Event Videos. Also, you can only have one Slide Video per slide and I need a second video to play on the same slide. All of our video source files have a required leader and trailer that I need to skip over in Captivate. I'm guessing the solution lies within Javascript. Is there any way that you can control the start and end points within an Event Video?
Hey, I inserted in my Captivate Project a slider object as Html web. I want to send and store the value of some Variables that are in my html page to the user varibales in my Captivate project. so that I can display them on the Project. Any help to cannect html js to my captivate js ? //my html code <!DOCTYPE html> <html lang="en-us"> <head> <style> #main { border-radius: 20px; background: #BCBABA; padding: 10px; width: 600px; height: auto; } </style> <script language="javascript"> // Captivate is get the values from presents and homeOffice var lPresents; // variable presents var lHomeOffice; // variable homeOffice var presentsOutput; var homeOfficeOutput; parent.iFrameSlider = window; // iFrameSlider defined in JS in Captivate function initSliders() { var lPresents = document.getElementById("presents"); var lHomeOffice = document.getElementById("homeOffice"); presentsOutput = document.ge
In a captivate file there a 4 buttons 01,02,03,04 and after clicking button 01 a popup will open. The popup will have a close button which will close the popup 01 when clicked on the close button.Same is the working for other buttons also. How to write a advanced action for this kind scenario?
Ich habe einige Captivate-Programme, in denen die Folien sehr ähnlich sind. Ich könnte also eine Folie kopieren und nur die Dinge ändern, die sich unterscheiden.Beim Kopieren vergibt Captivate ja neue Namen für die Objekte in der Folie. Es erfolgt aber keine Anpassung an diese neuen Namen in einer erweiterten Aktion in der Kopie. Also muss man die erweiterte Aktion kopieren und dann händisch an die neuen Namen anpassen. Das ist eine irre Arbeit, wenn die erweiterten Aktion recht umfangreich sind. Gibt es irgendeine Möglichkeit, dass beim Kopieren auch die erweiterten Aktionen kopiert und automatisch an die neuen Namen der Objekte angepasst werden (in einer kopierten Aktion mit neuem Namen)?Oder gibt es irgendeinen anderen Tip, um sich die Arbeit zu ersparen, alles in so einer erweiterten Aktion neu zu schreiben?
the pipette does not work correctly, takes the color lighter.
We are experiencing a problem with our course captions resizing after import. We’re a translation company, so we get the captivate files in English that have been built by our client and export their course captions into a Word document for translation before importing the translated word document back into the course. We don’t mess with the word document at all throughout the translation process and yet every time after we import, most of the caption text will grow to be a font size larger. We then have to go in and manually update the font size for every caption to what we want it to be. The courses do use themes and have all of the correct font sizes saved as styles to the Object Style Manager. For some reason, after we import course captions, all of the styles become overridden even though they are not overridden in the English course. Strangely enough, if we export the English captions and then immediately reimport them back in without even opening the word document, the same
Hi,I have downloaded Adobe Captivate 11.8 (subscription) to work on a courseware. I have saved it as cptx format. I have another laptop which is currrently using Adobe Captivate (2019 release) update 5. I used it to open the file and unable to do so, with the error shown in the attached image. May I know is there any solution to open the file using Adobe Captivate (2019 release) update 5? Thanks
I set my quiz score to report back as points and that 11/12 is minimum passing score. It is showing up in the LMS as 11% or 12% but changing to completed. Where should I look for my error?
Hello,In a project of 10 slides, there is a review button hidden on each slide, which will be displayed only after the next button on particular slide is clicked.Example.Slide 1 to Slide 4: When the next button on these slides are clicked it will advance to the next slide.Slide 5: If the next button on the slide 5 is clicked it will advance to the next slide & the review button which is hidden on each slide should also be displayed from slide 5 onwards to the rest of the course. How to write a advanced action for this type of scenario?
Hello,I have recorded audio in Captivate 6 by going Audio>Record> to slide. I have recorded the slide and then want to edit. However the edit buttons are greyed out as seen below. I have then pressed edit with adobe audition and again the options to cut/edit are greyed out. I'm wondering what I am doing wrong:Thank you
Hi, The Adobe Learning Manager [https://captivateprime.adobe.com/] has been under maintenance for many hours now. This is quite inconvenient for some of us who work during the week and only have time to study during the weekend. Do you know how long the Adobe Learning Manager will continue to be under maintenance? [User-Experience tip for the captivateprime.adobe.com team: In the weeks prior to maintenance, place a notification containing the maintenance dates on the course page. ]
I was asked to create a Captivate project from a PowerPoint and it has been published to our LMS. One of the learners sent a screenshot showing that several slides were blank except for the next/previous buttons and the slide numbers (picture below). Since I used the "Create Project from PowerPoint" option, these buttons and slide numbers were the only thing I had added. I can't duplicate this error in testing, there is definitely content on the slide. Has anyone else seen this error? I've been googling and searching this site but can't find anyone else with the same issue. The only thing I can think of is the learner was commecting from home through a virtual desktop using the VMware Horizon client and maybe that affected it? Any help would be appreciated as this is Compliance training so figuring this out is high-stakes for me!
Gentlefolk,An issue that has plagued me forever with Captivate 2019, the rows in my closed captioning window are not numbered. In all the demos I have seen, everyone but me has rows numbered!Pushing Captivate 2019 on Windows 10.Suggestions for getting my row numbers to display?Many thanks!Don
Hi there - I created video in mp4 format and inserted this into a Captivate project. Once the slide hits the video an icon will spin for a bit, then the video plays. What can I do so it plays seamlessly. Thanks.
Hi! We're trying to copy/paste text from an outline in a word document into Adobe Captivate slides...standard opperating procedures that we want to track people reviewing. I'm wondering, is there a way to copy/paste from the word document and have the highlighted lines in the image indent? We don't want to start over with lettering/bullets/numbers as it needs to mirror the SOP's numbering scheme. It's not a huge thing if they don't indent...but I sure would like it if it would.
Hello All, I'm having seeking some guidance resetting a Quiz from within a Captivate/SCORM 2004 3rd Ed file. On a very basic level, I'm allowing 2 attempts at the Quiz before the student must click the "Retake Chapter" button. This button resets all of our User-created Variables and states of Smartshapes, and Jumps to Slide 1 (effectively resetting the "instruction portion" of the Chapter and starting the student over). Captivate Support advised that resetting the Quiz should be done with an Execute JavaScript > cp.resetQuizData() > Current Window. To be clear, I know nothing about JavaScript, I literally copied-and-pasted what they sent me. This command doesn't seem to be doing the trick- the student is still locked out of the Quiz after hitting the max number of attempts. This was confirmed by the Quiz Instructions Slide's "Next" button (Go To Next Slide) will not go to the first Quiz Slide. I called Support today and they told me that "JavaScript is ou
Overview As Adobe continues to focus on developing new products, solutions and flexible licensing options, we have decided to discontinue Adobe Captivate perpetual licenses, worldwide. Adobe Captivate, post February 15, 2022, will be available through subscription licensing options only, which anyway is today’s preferred licensing option by the vast majority of our users. Subscribers get several advantages. The cost is lower for subscription and subscribers are provided both feature and security updates very regularly. The updates even include new media assets to use in your projects. Given that shift, subscription will become the new normal in February of 2022. At that point the old ‘perpetual’ model licenses will no longer be available. Instead, Captivate users may purchase Adobe Captivate using any of the subscription options. You can learn more about a Captivate Subscription here. https://www.adobe.com/products/captivate/buying-guide.html What
Is there a way to make drag and drop answers stay in the place that it was dropped, even when going back and forth between mutliple slides? This is more for a practice type exercise and there aren't any right or wrong answers but I need the drop sources to stick to their drop targets. I haven't found this answer yet. Thank you.
Hi How can you put AutoPlay on HTML5? I still have to click on an arrow, so that the content starts. With Flash was not a problem ... Regards Chris
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
すでにアカウントをお持ちですか？ログイン
アカウントをお持ちではありませんか？ アカウントを作成
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
AdChoices