Flash Player (read-only)

This is absurd. Windows 10 has tried - and failed - to push an update more than 40 times. Error message?Update for Internet Explorer Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3133431) - Error 0x80242fff.Microsoft says contact Adobe.  Adobe says contact Microsoft.Thanks in advance for the assistance

Adobe Flash Player is not working. It keeps sending me to a test page. It also says it's disabled. But when I follow the steps to enable it, I find it is already enabled.onthewise

Why is the Adobe FlashPlayer not listed on the Plug Ins screen? Its downloaded but i need to enable it

i recently updated my toshiba to win10 os. i prefer firefox and use duck duck go as well as ad block plus. i have the latest version of ff, flash player and have gone thru all the self help steps. videos play fine on chrome and ms web toolbars. i have to go to chrome to watch vids now. can flash be fixed on ff?  thx for any help.

Every time I try to use .swf files (be it in Chrome, Internet Explorer, VLC, MPC, or any other .swf player) I have issues with sounds looping over and over until it all becomes one garbled mess. I don't know if this is a problem with my Flash Player settings or if this is a problem with Windows 10, but I can't figure out how to fix it for the life of me and would like some help. It would be much appreciated if anyone could help me out here, thanks.

Tidak bisa download Adobe fase player

I recently ran a malware cleaner on my Windows 7 OS and it wiped Adobe Shockwave and Flash from both Firefox and IE.  With a great deal of effort, I was able reinstall both on Firefox (at least the Adobe test says the latest version is installed).But I have been unable to re-install Adobe Flash on (the current version of) IE.  I have Shockwave Enabled and ActiveX unchecked.  After the Download, I see Version 20.0.0.270 and Windows 64-bit, English, MSIE.  After clicking on Run, I continually get the message “Application Initialization Error”. Since Flash re-installed on Firefox, I have not gone to the trouble of uninstalling my anti-virus software.Help will be greatly appreciated.

Hello,I recently updated Adobe flash to 20.0.0.286. After installation, several websites' flash components (YouTube videos, etc) would no longer load on my computer browser. I checked these same websites on my phone and the websites loaded properly. I also tried loading these websites on two different browsers (Firefox and Chrome) and both would crash. Other (non-Flash) websites work fine on both browsers. There would be no formal error message - eventually the browser asks me if I want to kill the process, or the web page just crashes. I have also tried restarting the browsers and restarting my computer - these did not solve the problem.I am using Windows 8.1. My version of Firefox is 43.0.4. Here is the information from my Chrome browser:Google Chrome47.0.2526.111 (m)OSWindows UNKNOWN SP0 64 bitFlash plugin20.0.0.286 C:\Users\Nassim\AppData\Local\Google\Chrome\User Data\PepperFlash\20.0.0.286\pepflashplayer.dll--- Crash data ------ GPU information ---Graphics cardAMD Radeon HD 7660GD

I am running i-7 5700HQ @2.70ghz, 16 gb ram, 64bit, windows 10, Firefox 44.0. I have had this computer for about 6 mos. From the beginning it has had problems with the Adobe Flash Player crashing. It occasionally works but very rarely; I estimate I am experiencing a 98% or above crash rate. I have updated, erased and reloaded the flash player several times to no avail. Any suggestions? I am wondering if it is operating system problem or flash player problem.

My browser freezes many times an hour. This happens at work under Windows 7. This happens at home with Windows 8. It happens all over the web. It happens with Firefox, Chrome and IE. I have the latest version of all software installed. The Windows 8 box is brand new and the Adobe products are a few of the first things I installed.The message is always in a pop-up box "Shockwave Flash may be busy, or it may have stopped responding. You can stop the plugin now, or you can continue to see if the plugin will complete." Most times I get Continue or Stop Plugin buttons... occasionally I see a button to debug the code.Why does this happen everywhere regardless of PC, browser, and operating systems?I posted this on the Shockwave forum and was told this is a Flash issue!Thanks....Paul

Surface book i7, 16GB, 512SSD (new, not bragging much...)Win10Firefox 44.0Adobe Flash 20.0.0.286Playing any flash video content the play and progress bar are very small.  I don't know how to change or fix this.I had this problem on a Lenovo Yoga 2, but never solved this problem.In MS Edge it appears to be the right size however.Please help as I want to use Firefox.

loader load swf file asyn will helps a lot for web games on PC. I am hoping for this feather.

I'm trying to take an exam online using Remote Proctor and when I try to set it up, Flash won't let me click on "allow," or any other choice.My info:Windows 10Chrome and Edge browsers have built-in FlashFlash version 20Things I have tried:uninstall/reinstall Flash from my computer (not sure this does anything since it's within Chrome/Edge browsers)Tab to highlight the "allow" choice and spacebar/enter (nothing happens)Here is where I get stuck:

2 users, I user fine. other same setting flash doesn't work. compatibility setting fix IE11 but edge doesn't have

We have a digital signage product that uses the ActiveX flash control.  After upgrading a few of our systems to Adobe Flash 18.0.0.203, we are experiencing black screens when flash should be playing.  When our application starts, the first SWFwill play correctly, but all subsequent SWFs only display a black screen.  No errors are being generated.This is a critical issue for us and I assume many others using the same technology.  I would be glad to provide any other information or code snippets if necessary.

Trying to watch a BBC weather video.    Says it requires Adobe Flash Player to watch it.     Checked status shows it loaded (pre-loaded with Windows 10) but disabled.     Checked in advanced settings where it is shown as "On".    Any ideas please.It was working OK yesterday - but I downloaded an update and this seems to be the result!!!   Also if I log in as the administrator it works fine.  Thank you

I have installed and uninstalled Flash Player 20 a number of times but when I "Check if Flash Player is installed on your computer" it indicates it is not installed.  I have checked IE Manage Add ons and it shows as being enabled.  It was working fine until the last update about a month ago.  What else can I try to get it to work?

Evening AllI'm at the end of my tether with this problem on my Mac and can't seem to get an answer from Apple or Adobe on this subject. When I bought the mac it used to accept a flash player update no problem but recenty its started to come up with Not enough Permissions to write to disk. I'm an admin on the mac and this still doesn't seem to fix the issue.I contacted apple and they deleted all existence of Flash Player and re-installed from new and this seemed to work. It was a long and laborious job and took hours whilst on the phone to apple support. And then cue and flash update in a couple of months down the line, I click update and the same error message comes back up, not enough permissions to write to disk.I contact apple again but this time the technical advisor said that the advisor that i spoke to last time had no authority to do what she did and was not the correct procedure and it was an adobe issue and apple could not help any further - which was very unhelpfull to say th

Beginning this morning, Adobe Flash Player is crashing in every browser I try it on.  Flash Player Version: 20.0.0.235.  On Windows Ten.  I've tried uninstalling and reinstalling without improvement.

I have tried uninstalling/reinstalling flash, uninstalling/reinstalling my browsers (Firefox, Chrome, IE), but I continue to get a message stating that the flash plugin has crashed.  I have tried disabling all other add-ons/extensions and restarting my computer but nothing seems to work.  Some troubleshooting sites have suggested disabling hardware acceleration, but I am unable to do that since no flash player can even load in my browser.  The player was working fine previously, but now it is  completely unresponsive even though nothing has changed.  What else can I do to resolve this issue?

Hello!Last year decided to buy a new PC.Chose the following configuration:Intel Core i5 4570;8 GB RAM (2 modules of 4 GB);GTX 970 (GIGABYTE)I collected and connected. In general, the system is running fine, except for one thing – there are problems when playing online video in flash (freezes). When viewing videos directly from the hard disk of the computer or in HTML5 – there are no problems, the video plays good, without interruptions and deadlock.I updated Flash Player (with cleaning of all the remaining files and registry branches), the video card drivers and codecs are of the latest versions.It doesn’t matter which browser to use: the video lags in IE, and Google Chrome, and Firefox, Opera. Enabling/disabling of hardware acceleration is meaningless too.I enabled/disabled the built-in flash player, set Adobe - alas ...One more moment: it is more or less possible to watch video with “prehistoric” monitor with a resolution of 1280x1024, but with a resolution of 1920x1080 – almost impo

We have a C++ MFC program that hosts a Shockwave Flash player within an ActiveX control. Flash Player version 20.0.0.228 causes the program to crash.An Access Violation occurs on "COleControlSite::XOleClientSite::Release()".This is called whenever memory for a Shockwave Flash event is released.Most of the time it works correctly. If I set a breakpoint, I can see the symbols related to the event.However, when it crashes, the symbols are trash.Perhaps the garbage collector is trying to release memory for an event that has already been released?If I roll back to 19.0.0.245 the problem ceases to occur.This problem occurs for Windows 10, 8, 7, and Vista.The C++ program has used the same Shockwave Flash control for many years across many version of Flash Player without incident - until now.We have many customers and this is a huge problem for us.

Operating system version - Windows 10 64bitWeb browser and version - Most up to date IE, Chrome, and FirefoxFlash Player version ‌ - 20.0.0.267Hi all, I have .swf files that function similarly to a slideshow (I'm converting Captivate files to Articulate files if anyone is familiar). My issue is that when playing the .swf in my browser it will play the initial screen/slide just fine but once I click the next arrow the slide will transition then remain blank (the player seems to become unresponsive). I have tried reinstalling Flash Player several times and tried opening the file in Chrome, Firefox, and IE but the same issue occurs. The files play fine on other computers but not this one. Any ideas on how to fix this?Here are some screen shots (I've blocked out information due to NDAs)The below screen grab is the first slide. The center fades in and the timeline ends.After clicking the "Next" arrow the contents of slide one do not leave the screen. The first part of the content for slide

I've filed a bug Bug#4103273 - ActiveX no more load any SWF from local diskThere are no possibilities to load a local SWF through ActiveX using "file://" or directly from "C:/", As a side note now with the update policy in Windows 10 we have no control in upgrading or downgrading the ActiveX and we have some thousand user blocked and no possibilities to start the software.Any ideas or workaround ?

Hello. Since I updated the lastest adobe flash player 20.0.0.267 I cant use my Control Centre (Brother's printsoftware) to scan documents to my computer. I only get a blanc screen. Is Adobe aware of this and when will it be fixed?Regards,Joop - The Netherlands