Fresco

I'can't use Fresco any mor on Windows 11 I updated updated to version 4.6.0 and it crash same way as version 4.4.0 and now can't I roll back to version 4.3.0 that worked. The program total look up and display a grayed popup crash report how is also looked up can't send the reportComputer MSI Codex serieCPUCodename Coffee LakeSpecification Intel(R) Core(TM) i7-9700KF CPU @ 3.60GHzNorthbridge Intel Coffee Lake rev. 0DSouthbridge Intel Z390 rev. 10Bus Specification PCI-Express 3.0 (8.0 GT/s)Graphic Interface PCI-Express 3.0PCI-E Link Width x16 (max 16x)PCI-E Link Speed 2.5 GT/s (max 8.0 GT/s)Memory Type DDR4Memory Size 48 GBytesChannels DualMemory Frequency 1333.7 MHz (3:40)Mainboard Model Z390-A PRO (MS-7B98) (0x0000049D - 0xB5BE7702)Volume h:\, 2794.5 GBytes (98.8 percent available) BackupVolume d:\, 912.4 GBytes (97.2 percent available) Program discVolume e:\, 2794.5 GBytes (61.4 percent available) Data discVolume f:\, 2794.5 GBytes (82.5 percent available) BackupVolume g:\, 1863.0 GBy

fresco crasch at start and i'm not fast enough to send the report. So i can never get the support i need. what can i do?

I need help troubleshooting my Fresco crashing after loading documents. Crashes right at the document screen shown in the included screenshot. I've tried CTRL + ALT + R for reload, waited 5 minutes, and relaunched, but it crashes still. I have also tried to re-install Fresco. I have NOT yet attempted a full Creative Cloud re-install. I haven't had any luck figuring out how to roll back to the last version of Fresco I used, but I was using it fine right before I updated the program. Any instruction on how to do that, if possible, would be nice. I'll obtain logs however possible, as needed. Anyway, any help would be appreciated. Thanks. Side Note: The Crash Report window also crashes along with Fresco, disabling the ability to log and then send reports about Fresco crashing. Just thought I'd report that issue.

Hello, I don't know if I'm the only one in this case, but since a few days my Fresco app keeps crashing on my ipad. I saw there was an update, which I did, but same again. I turned my Ipad off completely, then back on, but same again. I didn't try, yet, to uninstall and install back (beeing afraid of loosing things). Is it only me or is there something about this last version/update ? Thank you for your help. Marie-Agnès

I've been using the program for around a year now and uninstalled it a few days ago when my school subscription ended only to download it again on a personal account. It's worked completely fine the entire time but now that I've reinstalled it on my personal account it crashes after "loading documents." I tried restarting my PC, uninstalling and reinstalling both Fresco and Creative Cloud, but so far nothing has worked. I've seen a few others experience the same thing with 4.6 and wondering if this is an issue with the program itself.

fresco 4.6.1 crashes... is it not possible to go back to older versions? So what to do?

I bought creative cloud to use photoshop and fresco. When I start the Fresco program, a "Loading documents" text appears for like 10 seconds and then the application closes itself.I tried reinstalling everything, I tried using the V4.6, restarting computer, tried to update everything, tried updating the drivers, nothing worksCan someone check my Adobe Log information and tell me what to do? (Also please tell me how to collect my Log Information)

I am unable to open Fresco on my PC. It constantly gives me a message that it has crashed, and asked if I want to send a report. I have unistalled and reinstalled several times.  

Why can't I open Adobe Fresco versions above 4.0 on Windows? How to solve?

Seriously. Fix it! For as big as Adobe is, the developers should be able to fix the desktop app so it works correctly and so we can use all the new features. But no, we have to use verson 4.0 meanwhile people are getting to use version 4.6. All of my other Adobe products work fine on my PC.  Seriously, get your act together Adobe! 

I encountered a crash issue when using Adobe Fresco. The app crashes immediately upon opening. Deleting the app and reinstalling it temporarily solves the problem, but after one hour, the issue occurs again. However, deleting and reinstalling the app will result in the loss of related data within the app. Is there any good solution?   Note: Renamed by Mod

Good evening,The last two updates of Fresco I've installed on my Dell XPS Laptop both refuse to make it past the document retrieval screen on startup without crashing. With Version 4.6, I was at least able to revert to Version 4.4, which functioned well, albeit without the newer features of the subsequent updates; that is no longer an option. I made sure that my computer was fully updated with Windows and installed Version 4.6.1 hoping that the startup issue would have resolved itself, but the same thing is happening, and now I'm unable to revert to a functional version. I've tried clean installs of both versions, to no avail.Attached are the logs of the last crash with Version 4.6:Faulting application name: Fresco.exe, version: 4.6.0.1242, time stamp: 0x6377dc84Faulting module name: gemini_uwp_bridge.dll, version: 0.0.0.0, time stamp: 0x6451651eException code: 0xc0000005Fault offset: 0x0000000000a82afeFaulting process id: 0x0x2514Faulting application start time: 0x0x1D98C162643AF18Fau

I imported a photoshop file with about 40 layers into Fresco in the hopes I could do some painting between and on some of those layers. Unfortunalty it seems that the (most) of the layers are merged into one layer with a little PS icon next to it. Is there a way to un-group these layers and paint within the actual photoshop file or is this what they mean "to seamlessly work in Adobe Fresco and Photoshop."? Just painting on top of the file?

Hi,I am pretty new in Fresco and I wanna use it for the illustration of rooms. So I need perspective grids. What I achieve so far is set up a perspective grid, respectively set up multiple line setups for various grids in 1 illustration.My questions are:1.How can I turn of the annoying crosshair which is following my brush all the time? I knew it might be helpful for somebody, but for me it distracts my drawing flow.2.Is their an option to set up a parallel perspective? Sometimes I create isometric illustrations, and sometimes I create illustrations with 2 vanashing points which are parallel but less steep than the isometric view. Like a false perspective. For various reasons a very nice thing. Is their any possibility to create a Grid which is parallel? Do I need to import a JPG of my prepared parallel grid to use it as a base?Thanks for your help fellow creatives 🙂

Hello ,I have a Wacom  Ctl-472 One By Small 8.3 X 5.7 and an AMD RX 580 GPU . I am trying to download and use fresco but it is not compatible. I have the latest drivers for my drawing tablet and for my GPU .

How can my artworks created using Adobe Fresco be used for commercial purposes? Anyone please help me. Thanks.

First of all, I have to say I love so much Adobe Fresco, because this legendary app encourages me to art.  But I have a problem. I do vector drawing and why do I see these very thin black lines between two patterns. Am I doing something wrong? I tried other vector pens but I couldn't solve this problem. I believe this is a problem that concerns everyone. Can you help me to solve this annoying thing please?    

Embrace the Latest Update: Spring & Summer Brushes from Kyle T. Webster and Exciting New Enhancements in Adobe Fresco v4.7!       Unleash Dynamic Animations by Applying Motion in Place:- Elevate your animations by applying motion path effects like grow and shrink directly in place. With this feature, you can break free from predefined paths and add stunning motion effects in a stationary manner. Bring your artwork to life like never before with Apply Motion in Place, available on iPad and Windows!           Brush Management: Now Personalize and Organize Your Favorites:- Effortlessly manage your favorite brushes in Adobe Fresco with the enhanced Brush Management feature. Save any built-in Pixel, vector, or live brushes, along with your custom settings, in a library of your choice. This new capability, available on iPad and Windows, allows you to easily access and organize the brushes that inspire your creativity.      

Can shapes be turned off.

My projects drawn on fresco with vector brushes always turn pixelated whenever I open them in photoshop. It is the same result when I export in a PSD or PDF and when I just open from the cloud it still turns pixelated once in photoshop. How do I get vector drawn projects in fresco onto photshop and keep them vector?

Im having trouble getting fresco to remove backrounds and erase with the fill tool and the color set to 0% I can do it if I start with a vector layer and vector brushes but when I try to use a pixel layer it doesn't work. HELP!!!! 

Good evening all,  I desperately need some help! I need 2 things that I cannot seem to fine; 1. Stop Vector brush at the edge of canvas (similar to pencil). This may need a a 'canvas lock' or something similar but I do not know.2. Also if there is an easy way to change line colour once drawn? Thank you! Hugely apprecite any help! 

I have been using Fresco for years. I draw every night. I moved to Fresco from ProCreate because of vector. I've been working on an animated series and have been exporting ZIP files of PNGs once I finish a plate. Then I animate in Photoshop. So I have media date-stamped, proving I have created it. Recently, I have noticed hundreds of my files have vanished. In checking Files, there is one or two drawings from, say, a month when there should have been 20.  I have written to Adobe on this issue before. And I get stonewalled. I often alternate between two iPads but this shouldn't be the problem. I've plenty of storage and pay a fairly hefty fee per month to use Lightroom, Photoshop and Fresco. I think there's a serious flaw in Adobe's cloud.

So I logged out of my personal account, and I tried to log back in to upload one of my recently finished drawings, and suddenly I had to resign up my email account. I know I did not delete that account, but I decided to go through with it and hope it regiestered my email, but now I'm on a clean slate. Where did all my drawings go? I logged out, tried to log in, and it said my account wasn't existing. it forced me to resign up, after I had literally just logged out, again, didn't delete it, I think i'd remember doing so, and now nothing is there when I re-made my account and I cannot retrieve my old drawings anywhere. There isn't a solution anywhere on your websites, please help.I logged out, it deleted my stuff, maybe my entire account, had me re-log in after it said repeatedly that my account didn't exist, and now I can't get anything back.

Been working on a project for a couple months. Using fresco and creative cloud on my iPad. I often duplicate files and clean the new version up before continuing work to keep file size small. Now I'm looking for older versions and they have disappeared. I have more than 50% available space in cloud. Some files are recoverable but have no contents after being recovered and have no available file history to revert to. This recently became problematic when one of the pieces I finished early is now missing the entire final version file. As in, I can't find and go back to edit a piece on the project I am still completeing, and it's only been a couple months. I tried looking on CC on desktop but nothing there either. Anyone experiencing this? I'm not sure where else to look. The pieces took over 20 hours so this is fairly problematic. I had some billing issues but nothing that cut off service. I move files and reorganize folders often.