How to disable/block Firefly and Generative AI In PhotoshopOpen for Voting

Are there any suggestions/solutions for those of us who wish to disable or block AI tools like Firefly or the generative AI within Photoshop? I understand I don't actually have to use tools I do not wish to use within Adobe programs, but I think it would also be nice for some of us with strong ethical opposition to generative AI to have an option for it to not consistently pop up in our feeds or have our work training AI models without permission (hence why I disabled the content analysis option for my account).   Title edited by mod

P: Full size photo shown on my secondary monitor. Can you stop it dissapearing every time the focus moves to something else?Open for Voting

I have a three monitor ‘Windows’ setup. I want lightroom / photoshop on monitor 2, the photo full size on the secondary display on monitor 1. Monitor 3 is used as general purpose, often showing ChatGPT as I edit. I cannot get the full size photo on monitor 1 to stay there if I start typing on monitor 3. It goes blank.A good answer about the issue was received from Conrad C in the forum, as below.This isn’t a technically verified or official answer, but just from experience, I am not sure this is solvable unless Adobe makes some changes to the code. To me, the Secondary Display window appears to be  a floating “palette” or “panel” in the same way as panels in other applications. The problem with that is, in most other software that I’ve used, panel-type windows appear only when that application is the active/foreground application. Switching to another application hides all of the first application’s panels, even though the main application window stays visible.In Lightroom Classic the Secondary Display window has a very thin title bar, the same kind used in floating panels. Not the full height title bar used in application windows. That’s why I think it works like a panel, not a window.I’m guessing you see the same behavior in Photoshop, where any floating panel (not docked to the main application window) also disappears when switching to another application. It’s worked that way for literally decades, as it has in other Adobe software.Not sure which OS you’re using, but everything described above is consistent with how floating panels are defined on macOS. In non-Adobe applications and Apple’s own, the same thing happens if panels are undocked and floating; switch to another application and floating panels are immediately hidden.If I’m right about all that, then the way to get this changed is to submit a feature request in the Feature Requests section so it can get voted up, and if Adobe decides to work on it they assign a Status to it. It might be enough to ask Adobe to change the window type of Secondary Display from panel to window, but I’m not a programmer so maybe there is more involved than that.  But who knows, maybe they’ll find it simple enough to make it an option.Keep in mind that changing this will involve changing something that has been coded that way for 19 years (Lightroom Classic) and over 36 years (Photoshop). That doesn’t mean it can’t be changed, but the current behavior is considered extremely traditional at this point in history.Personally I think it would be nicer if the Secondary Display stayed visible on application switch, so it’s a good idea.

Create droplets that are signedOpen for Voting

Currently I’m unable to use Photoshop droplets at all, because the company computer with security policies does not seemingly allow apps/applets that are unsigned to run, even as admin. Please consider a way to allow these to run in strict security environments.

I want brightness/contrast backOpen for Voting

I want the basic brightness/contrast adjustment layer back.

The Firefly Generation history doesn't show any information (date created, title, etc.) of any of the generated audio files. It only shows their type. This is useless info when it comes to choosing what to download.Open for Voting

ノイズ除去したらがぞうがまっくらになりましたOpen for Voting

写真をノイズ除去したら画像が真っ暗になりました。

ACR Color Grading: Keep Hue/Saturation sliders open by defaultOpen for Voting

 Problem DescriptionThe Adobe Camera Raw (ACR) Color Grading panel currently requires users to manually click the disclosure triangle to reveal the Hue and Saturation sliders/numeric inputs.This hidden layout adds repetitive, unnecessary clicks to the editing workflow. Editors who rely on precise numeric values or slider adjustments must reopen these fields constantly.The UI should prioritize utility over a minimalist aesthetic.Proposed SolutionMake the Hue and Saturation sliders/input fields open by default when launching the Color Grading panel. Alternatively, allow ACR to remember the last used state of the disclosure triangle so users who prefer them open do not have to repeatedly click to reveal them.Thank you. 

P: Amount Sliders on Most LR Classic PanelsOpen for Voting

We have amount sliders on masks, presets and various other individual features (eg. sharpening) but we don’t have them on the panels themselves.  Particularly the color/tone panels.  These would be very helpful in fine-tuning changes made without having to change individual settings within.  How many times do we make our Tone Curve, Color Mixer, Color Grading, Calibration changes to get the perfect colors then walk away and come back the next day to see that we had over (or under) done the changes.  We then need to go into each panel and tweak the individual sliders to fix.  If we had amount sliders on each we could simply dial up or down the amount of the panel.  Exactly as we can do with the masks.  This would save a tremendous amount of time in my edit workflow.

Photo/Video enhancing aiReleased

Basically it tries to enhance the picture as all (environment) in quality and then enhance the faces. However a option also to enhance faces really good is to use your Adobe stock to find a 3 or more specific match for the face and the ai replace it so it become more natural, just like snapedit way. But also having the normal face enhance option is still good and won't harm. Also you can enhance environment: by changing the colors and make it better by giving options like the styles in text to images of adobe firefly. Note: please if you're planning to do something like this don't forget to try to make the face enhancement quality close to the quality of the surrounding environment, this will make it feel natural and good. So try to prevent upscaling and face enhancement AIs mistake at not balancing between both of them. And don't forget video upscaling and enhancing: there are few unpopular AIs that does this, so not just this will get really popular with you but also it would be the most useful feature in video industry.Everything I said about photo upscaling and enhancing can be applied on video if you can and maybe also consider try to turn low quality video to high quality video WITH FPS.If you need an example you can view Upscaled channel on YouTube, he enhance Old Music Videos and Make it much better. Also you can make face retouch: like skin, make-up, face parts sizes like PicsArt app. Last but not least, a text to logo feature: having a text to image is quite amazing but with logo generations it would be complete enough.

Bring InDesign Data Merge capabilities to Adobe Illustrator's Variables tool.Open for Voting

We need enhanced Variable Data functionality in Adobe Illustrator similar to InDesign's Data Merge. The key requirement is supporting multi-styled text within a single Area Type frame/Point text while using dynamic variables.

P: Shortcut for "Grid Snap: Off"Open for Voting

I create photo books with lots of text and photos. To align text and photos I most of the time have “Grid Snap” set to “Cells”. But sometimes there is a need to place something a bit beside an already existing frame and then one has to set “Grid Snap” to “Off” and when done set it back to “Cells”.What I would like to see is something like press “Shift” while using cursor to move the cell in question. The “Shift + “Cell move” set the “Grid Snap” temporarily to “Off”. When the move is done and “Shift” is released the “Grid Snap” is returned to “Cells".This functionality would improve the workflow a lot in the Book module.

geht nichtOpen for Voting

geht nicht

kredi kullandırmıyorOpen for Voting

Kredim olmasına rağmen sürekli bir sorun oluştu diyor. kredimi kullandırmıyor

how do I upload my own songOpen for Voting

I want to upload my own music track and make a video of my own photo 

More utilization of Fonts! Being able to prompt fonts to appear, dissolve, fly, move in any direction, etc. Text in first frame being the starting point, and from there prompting commands.Open for Voting

Please see 3 attachments of screenshots of a video of fonts in action. In sequence marked One, Two and Three. Canva created this video. Firefly should be able to do the same thing. I was unable to attached the mp4 itself.

P: A way to transfer my mobile presets to the desktop versionOpen for Voting

Maybe a sync button, or a way to export the presets into a file and then import them to the desktop version

Add Urdu Language Option in Premiere Pro Speech-to-Text FeatureOpen for Voting

Dear Adobe Team, I’m writing to request the addition of Urdu language support in the Captions and Transcript feature of Adobe Premiere Pro. As a content creator in Pakistan, I often work with Urdu videos, and the lack of this language in the transcription options creates difficulties in producing accessible and accurate content. Urdu is spoken by over 170 million people globally, and its inclusion would greatly benefit creators across South Asia and beyond. Adding Urdu support would be a huge step forward in making Premiere Pro more inclusive and creator-friendly. Thank you for your attention to this request. Best regards,Qasim Zia [personal info deleted by mod]

Tengo un problema y es que tengo créditos y al intentar generar vídeo me dice que no me quedan créditos evidentes pero tengo 2700 créditos.Open for Voting

Tengo 2700 créditos y estoy intentando generar un vídeo de 100 créditos. Me dice que no tengo créditos suficientes. Cuando tengo 2.700 créditos es que no lo entiendo.  

Kindly add auto captions and translation to all languagesOpen for Voting

Add auto captions an ai which detects words and it makes captions also add translationAdd enhance video and stabilizing of video

quiero informar un error: parece que no lee los prompts que uno le pone: gasto créditos y me devuelve siempre la misma imagen, un fiasco.Open for Voting

mi solicitud: que el sistema funcione bien: no importa el prompt que introduzca: repite una y otra vez el mismo video. sencillamente, no anda.

P: Add non-IPTC standard Getty "Personality" fieldOpen for Voting

I am a sports photographer, and Getty Images *requires* the use of the IPTC "Personality" field for all athletes shown in the image before submission.  I do most of my sorting, culling, IPTC labeling in PhotoMechanic before importing to Lightroom for toning and cropping (No AI anything allowed!). PhotoMechanic supports the Personality field, which I use to insert the subject of the image's name.  However, when I search for an athlete in Lightroom's "all searchable fields" , I get a "nothing found" result.     In searching Adobe.com, I don't see "Personality" field supported by Adobe (yet).    It seems that Getty would have enough weight to get Adobe to support the Personality IPTC field.

It's 2026. Where is AV1 Support?Open for Voting

I am not asking for AV1 to replace intraframe editing codecs, but basic decode/import support is long overdue and would immediately improve real-world workflows for a large portion of your user base.Please prioritize adding native AV1 support to Premiere Pro. It is a modern standard, and its absence in 2026 is increasingly difficult to justify.

UI theme color customizationOpen for Voting

In After Effects versions up to 2024 it was possible to enable UI theme colorizingvia internal console/debug settings (theme colorizing).Starting from AE 2025 this functionality has been removed or disabled,and there is currently no way to customize UI accent / highlight colors.This negatively affects:– readability for long sessions– accessibility (eye strain, color sensitivity)– user workflow consistency across versionsRequest:Please restore UI theme color customization (even as an experimental or advanced option)or officially expose it in Preferences → Appearance.This feature already existed and worked before AE 2025. 

P: Update Needed for Nikon Zf Flexible Color Profile (Camera Matching) in LightroomReleased

Hi, Nikon has released FW 2.0 for the Nikon Zf two weeks ago, which finally enables Flexible Color on the camera (similar to the Z6III). This enables users to create "recipes"/LUTs so to speak within NX Studio, and export them as .NP3 files onto the Zf/Z6III/Z50II.    Upon importing the JPEG + RAWs to Lightroom (as of the latest release 14.3), there is no "Flexible Color" Camera Matching Profile on the Zf like there is on the Z6III. Please see the attached screenshots for your reference. I believe this should be fixed/added via an update to Camera Raw.   As someone who is 95% satisfied with my "custom .NP3 flexible color settings" on my Zf to achieve the images I want, there's only a slightly edit I want to apply to the RAWs. But, importing them into Lightroom automatically applies Camera Standard (and not Flexible Color, like it does on the Z6III). As expected, this results in a very different look and strong color shift since it isn't saving the Flexible Color information.   It would be greatly appreciated if this came to an update to Camera Raw.      

Canvas vs. Selection Alignment StandardizationOpen for Voting

Request: Standardize the Align tool in Photoshop with other CC Programs such as Illustrator & After Effects. Current Behavior, Photoshop:When aligning layers, a user must manually toggle alignment between “Canvas” or “Selection”Clicking the three-dots menu next to the align tools in the Options Bar Requested Behavior, Illustrator/After Effects Example: In Illustrator, selecting a single object/layer auto-assumes “Align to Artboard” (with other options available via the drop-down).Align tool in Options Bar auto-assumes “Align to Artboard” with only one object/layer selected When multiple objects/layers are selected in Illustrator, the align tool auto-assumes “Align to Selection” (with other options available via the drop-down).Align tool in Options Bar auto-assumes “Align to Selection” with multiple objects/layers selected  Likewise, in After Effects, selecting one layer auto-assumes alignment to “Composition” (with other options available via the drop-down).Align tool auto-assumes “Align Layers to: [Composition]” with only one layer selected When multiple layers are selected in After Effects, the align tool auto-assumes alignment to “Selection” (with other options available via the drop-down).Align tool auto-assumes “Align Layers to: [Selection]” with multiple layers selected How could this look in Photoshop?The precident has already been set with Illustrator, specifically. In my opinion, the UI should be very similar to standardize the tools across apps.Utilize Illustrator UI to inform Photoshop tool/UI standardization