Photoshop

Using either quick keys or menu selection to resize an image just activates the hand tool. No size settings window appears or anything - just switches to the hand tool and the little square cursor. Plugged my keyboard in, blew off my mouse, and restarted my machine (and programs). Same thing. Anyone have any ideas what's going on? Basically can't do my work right now 🤦‍♂

Bug summary:Turning on HDR mode in Windows causes the Photoshop canvas display area to become unstable editing HDR (32-bit) files whenever the cursor moves into the main canvas area.Details:I have been using Photoshop on my system for a long while without any problem. I just upgraded to an HDR monitor, so turned on Windows HDR mode.If I open a 16-bit (non HDR) image file, everything is fine.If I open a 32-bit HDR image file then each time I move the cursor within the main canvas area the entire screen goes black, flashes a few times, and after not moving the mouse for 2-3 seconds restores to the proper appearance. Each time I move the mouse, this repeats until I move the mouse out of the main canvas area when everything is OK again.While my screen is flashing, my monitor displays a Dolby Vision popup on the bottom right that I otherwise only see when the monitor is switching into HDR mode. This makes me think that the instability may be related to the display moving out of and into HDR

I have updated my computer with Windows 10 and installed CS5 to windows 11. Now it shows that CS5 must be re-activated because there is an existing activation on another computer.

Bonjour à tous, suite à une réinstalle de mon MAC j'ai une question SVP. Sur photoshop je clique sur un élément de ma création et ça selectionne le calque de cet élément. Mais avant le simple fait de faire ENTREE sur son clavier déselectionnait ce calque, mais je ne trouve pas ce paramètre.  Merci d'avance à vous tous --- Hello everyone, I have a question after reinstalling my Mac. In Photoshop, when I click on an element in my creation, it selects that element's layer. Previously, simply pressing "Enter" on the keyboard deselected that layer, but I can't find that setting. Thank you all in advance.

Since the update of Photoshop 2026, the zoom isn't working as it used to in the previous version of Photoshop. I'm using a Logitech MX Master 3S mouse on a Mac. I use the thumb wheel for zooming and since the update, it makes a centered zoom instead of following the cursor position, and zoom at the place where it's positionned. I had a screen sharing session with a technician and everything seemed okay in my PS settings and in the Logitech App, so it's probably an issue that needs an update. He suggested to fill out this form to signal the issue.

Hello there, could someone explain to me in short terms what the exact steps are to create these "screenshots" like in the example video? The process is shown very fast, and I didn't fully grasp how to do it in Photoshop. Thank you very much in advance! Nadine

I can't use generative AI with my Photoshop v26.11 today. Every time when I try to generate or remove something, it keeps saying 'We've encountered an issue and can't complete your request at this time. Please try again later'. My collegue's Photoshop has had the same problem. Anyone knows what has caused such issue? It's not the first time but usually it would be back to narmal in less than an hour. But not this time, it hasn't worked for more than six hours already. Pretty frustrating...

 Hi everyone,I’m having a recurring issue with Photoshop’s Generative Fill when using the Gemini 2.5 (Nano Banana) model.Every time I apply a generative fill on a selected area — even for very small changes (like color adjustments or replacing a detail) — Photoshop creates a new generated layer that is slightly misaligned, either scaled differently or shifted by a few pixels, so the generated content doesn’t match the original position.You can see it clearly in the screenshot:– the mask is correct– the selection is correct– but the generated result appears on a layer that is not aligned with the original image– this makes the output unusable, especially for precise workI’ve tested:– different files– different resolutions– different GPU/CPU settings– stable vs beta versions– resetting preferencesThe issue persists only with Nano Banana, not with the other models.Is this a known bug?Is there a workaround to force the generated layer to match the exact scale and position of the selected a

Photoshop is driving me mad.It does not open its own PSD files.Please see attachment.In order to open PSD files on my computer I have to open them on the on-line "photoshop-like" software "Photopea", then save the file from there on PSD and open it.Problem is, as soon as I save it again on my computer, I CAN NOT OPEN the PSD file again !!!So I'm forced to re-do that process through Photopea again, and again, and again....I've tried saving the PSD file with nothing visible, and it still does the same problem.I'm using the latest version of Photoshop, I'm on a CreativeCloud subscription, Mac OS.Anyone knows how to fix this ? Please help !

Since updating to OSX Tahoe 26.1, Photoshop 2026 is completely unusable.  It doesn't just crash, it shuts down the computer completely.  I've had it happen repeatedly while creating a clipping path, retouching using the clone stamp etc. The system just completely shuts down. I've had to go through the extensive process of reinstalling OSX 15.7.1 to get my work done! 

HI Photoshop team, I have v 26.10,  a new update is available 26.11.2 ,  does it include any bug fix ? I know there's v27.1 but seems to have not fix any bug, neither performance, is it the case ? thanks

Здраствуйте, помогите пожалуйста решить проблему в Photoshop 2025. Данная проблема не физическая, отключила клавиатуру и прочее. У меня графический экран с отдельной панелью с кнопками. Вобще когда я создаю в PS новый слой, и например хочу нанести на слой режим, то словно у меня зажата кнопка AltGr но не физически а виртуально. Словно программа словила баг и теперь виртуально жмет данную кнопку. Как быть я незнаю. ЗПри нажатии на режим, появляется быстро AltGr иззачего момент поймать заскринить не могу. Тоесть у меня зажат бесконечто эта кнопка. Я отключала клавиатуру и прочее. Не помогло, есть ли вероятность что проблема с программе а не в Windows 10? Просто изза этой мелкой проблемы не могу продолжить обучение, а сроки горят. @Aleke прошу помочь мне с данной проблемой.

Hello! I have a list of custom brushes downloaded from various areas, and whenever I close the app and re-open it later, they're all gone, including any features placed on the window. How do I stop it from doing this? Thank you 

I HAVE HAD THIS PROBLEM SINCE YESTERDAY, HOW DO I SOLVE IT? IT'S NOT POSSIBLE, ALWAYS ONE...

How can I combine layers that are out of group using scripts? Thanks.

imac 27" 2017, Photoshop keeps crashing whenever I select neural filters. Tried some basic suggested solutions but nothing seems to work. Same goes for PS Beta version. Anyone with the same issue?

Hola. Desde hace un tiempo, sin que haya cambiado el ordenador ni el sistema operativo, (Windows 11), Cuando despliego la paleta de las Acciones me salen tres columnas en vez de una sola como me había salido siempre. El Photoshop lo tengo actualizado a la última.

I was trying to combine my layers together and then this appeared, How can I fix this??

With this latest update, I am unable to play any of the actions that I created in PS. The standard actions work, just not the ones that I've made. When I try to play the action, it gives me the wheel of death, and I have to force quite PS.Is there a fix for this that I'm unaware of?

Bonjour Photoshop ne fonctionne plus ! Merci pour votre aide !

Hello, When cropping images to the full height or width of the image (or crop along any side of the original canvas), then a 1px semi-transparent edge appears. For dark images, this causes a light strip when flattening/saving as a new JPG. For example, if I crop the image like this, going all the way to the left and right edges of the image: Then a transparent strip appears along the left & right sides: When flattened to save as a new JPG, it's still visible: This doesn't happen if I check "Delete Cropped Pixels", but then I can't finesse placement after cropping. It also doesn't happen if I bring the crop handles in a few pixels from the edge, but it's very tedious to do that for the high volume I work with, it's much more efficient to let it snap to the full width/height of the canvas. I tried adding a black fill layer below, which helps a little, but there's still a visible line.  Is there any other way to avoid this?

This is kind of a minor cosmetic issue. When I disable icon previews in a folder containing RAW files on macOS Sequoia, the Canon CR2 icons show as expected, but the Sony ARW icons appear as generic blue Photoshop icons. What's the deal here?

Hello, I am coming here because I am desperate. I have not been able to work for several days due to a mouse offset bug, like this:   The cross represents the place where I clicked with my lasso selection, as you can see, I managed to obtain a nice shape at an offset location with a single click. So I can no longer retouch or even delete elements from my photos without destroying everything with my tools. I note that this bug only occurs when I click, otherwise the cursor of my mouse seems to be correctly positioned (for example, on menu buttons like the one shown below, the mouse interacts correctly with the button without offset).    I recently added a second 4K monitor to my setup. I tried turning it off to see if it would solve the problem. I haven't seen anyone else having this issue on the net, so I'm coming here in case someone has a solution. I tried resetting Photoshop, uninstalling and reinstalling it, and using an older version. Thank

Estas ultimas actualizaciones empece a tener este problema, primero la interfaz al principio era super lenta y luego ya cuando actualice , no carga la barra de menus y problemas en la interfaz, con la version 27 crei que se solucionaria, pero el error se mantiene. 

PS 27.0, it doesn't work for me. It starts up and then simply stops after about 2 seconds without displaying an error message, nothing. Firefly, on the other hand, works perfectly.{Moved the reply to a new thread for better visibility by MOD}