Photoshop

I have tiff files created with Sketchbook app (formerly Autodesk Sketchbook), and I only see one layer when I open them with Photoshop on desktop.

Hi,   I never had this problem before. I've been working on a project in Photoshop and for some reason, it is now only working in grayscale. When I used the color picker to change color, it doesn't work.  I know remember doing anything different to cause it to work only in grayscale, but I can't seem to figure out how to switch it back to color mode and I'm in the middle of an important project. Does anyone know how to solve this problem?   Penny Jones   [email removed]  

Photoshop need add a 'Second Monitor Preview' native feature to Photoshop. It is crazy in 2025 we still don't have this feature. I know you can open a second window for a file then drag it to a second monior but this is a a pain when you are working with lots of different files. When I am working on my photography in Lightroom (which does nativly support a second monitor). I often open the file into photoshop to make some more extensive edits which need more than LRC. As Photoshop doesn't have native second monior support it means that for each file I open I have to open a new window then drag it to the second monitor. When the file is closed I have to close both windows to get back to LRC. This is a poor workflow for apps for professional creative artists. Please add the feature!! 

I've downloaded a pictures I've taken into photoshop and it has destroyed the quality of it.  I've had photoshop for years and no issues until now.  I've tried the desktop and also the web and same issues.  I've tried different pictures same issues.  Please help.

I just upgraded from Windows 10 to Windows 11, and I cannot get my Photoshop brushes from my old computer to my new computer. I went into Drive C, and navigated to presets, and copied the brushes from there, but they will not load. I tried Importing the brushes within Photoshop without any luck. Should I have done it a different way? 

Although I have used Photoshop and Lightroom for many years, I only started using Content Credentials recently, basically to tag the image I took and publish in the internet. However when I export and image with "Export As" from a JPG or a PSD, it does no allow you to incorporate the content credentials. Only when I create a new file blank and copy the image, only then it will add the content credentials. The same happens in Lightroom Classic if I export a file to jpg, it does allow to add the content credentials, however the file created, has no contact credentials.I am using a Mac with M2 chip and the latest version of Photoshop and Lightroom, both have full access to the disk as well as internet connection.Anyone has encountered this issue?

the toolbar of generative fill is missing

Hi there![Windows 11 Pro] Any chance that I could keep my Workspace Prefs while switching from an old computer to a new one? Would also be a switch from version 25.12.4 to 26.9.0Thanks

I just used the perspective warp tool with no issue a few weeks ago, and now it's acting very differently. When I select a quad, switch to warp mode, and start pulling a corner, the entire image warps instead of just the selected area. Please advise, I'm going crazy! Thanks in advance. 

My stamp tool isn't working and I don't know how to get it working again. I tried resetting it, I've changed the layers and I tried to deselect with CMD+D and nothing seems to be working. Does anyone know what I should do?

tengo problemas en instalar y que me funcione la ultima versión de photo y ligh, mi computadora solo aguanta hasta la versión del 2018 de ambos, pero no encuentro esa versión para descargar en ninguna perte, me gustaria tener su ayuda para que pueda trabajar

Seems like this is a relatively old issue but wanted to bring it up for further visibility as well as see if anyone in the community has a fix. A previous post from years ago can be referenced here: https://community.adobe.com/t5/photoshop-ecosystem-discussions/pressure-for-brush-size-ignored-when-holding-shift-for-straight-lines-dot2dot/m-p/11486511 Anyway, this wasn't an issue with my old Wacom Cintiq 13HD. I'm recently looking to upgrade and purchased a Huion Kamvas 16 gen 3 and I love everyhign about the hardware except this issue. Basically, when you use the shift + brush function try to create a straight line, the initial click uses brush tip minimum pressure and the end click uses brush tip MAXIMUM pressure. This makes the function incredibly difficult to use without adjusting brush settings each time you want to use it. Most people sketch somewhere between min and max pressure and rarely hit those limits. So when you want to create a straight line stroke between

Using a Huion Kamvas 22 Plus, PS CC, Win10, the pressure for brush size works fine in freehand drawing. Even when holding shift and drawing a straight horizontal line, the line strenght corresponds to pen pressure. As soon as I try to draw straight lines by drawing start and end point, the pressure is seemingly ignored completely, the lines come out thin, sometimes at random going from thick to thin.  PS CC updated, Huion Win 10 driver up to date (no older versions available as its a new model I believe) I tried it with ticked and unticked windows ink setting in the Huion App, makes no difference. Also tried using the PSUserconfig.txt fix to use win tab, as that seemed to resolve some pressure sensitivity issues for other users - this only resulted in pressure sensitivy to stop working altogether when win ink is UNflagged in the Huion App. No change to the straight line issue either way.  Any suggestions appreciated (especially where the root of the proble

When I open Photoshop today, my files aren't opening when I double click on them in the Recent list.  Nor do they open if I right click on them in File Explorer and choose Open with Photoshop.  Not sure what is happening here.  Any ideas?  Thanks.  

I don’t know why, but every time I use the Rectangle Marquee Tool in Photoshop, the corners appear rounded instead of sharp. It’s caused me a lot of problems — I just want to create a simple frame around an image with straight edges. I’ve already tried all the suggested solutions I could find, but nothing worked. Any idea what might be causing this? 

Hey everyone!I don't know if I am missing something, whether it be update notes or I just can't find it. I am using PS 26.8.1 and there is no "AI Denoise" button, no option to use the tool, or Enhance or anything. Did it get remove? or am I just stupid? Thanks!

I recently downloaded several template psds from KOZMIK DESIGN and keep running into the issue of being unable to open the files. Photoshop keeps giving me the message "Could not import the clipboard because photoshop does not recognize this type of file."  Does anyone know how to fix this? 

I ran some updates on my iMac (2020), updated the OS to Sequoia 15.3.1, and updated Photoshop 2025 to version 26.3. Then when I click to open I get the error “Adobe Photoshop 2025” can’t be opened  When I checked CreativeCloud, it randomly said i hadn't got Photoshop installed at all? I installed it, but it looks like a clean intall, I've lost all my preferences, workspaces etc. What is going on?

Hello!I am trying to create an elipse as a path so I can make curved text.  I read that I need to select the elipse them select path from the options bar but I can not find this option anywhere!  Where can I find the option if it's not on the options bar?  Is this a bug?  Ay help appreciated!

I have about 40 images saved as PSDs that I have prepped on a transparent background. I would like to load these images into a single photoshop file. However, when I select the images in bridge or in PS and ask PS to "Load Files into Photoshop Layers",  Photoshop creates layers from each image, but also adds a white background to each of the layers, not maintaining the trasnparency in each of the PSDs. Is there a way around this? Ultimately, I am in the process of making stop motion animations from the Timeline palette. The client wants the abilty to change the background layer, so I am trying to build that in by maintaining the transparency I already have built in each of the individual PSDs.

Hola, he seguido este tutorial https://www.youtube.com/watch?v=XPRbcJcgl7E&t=291sy no aparece la opción, sin embargo sigue apareciendo en filtros neurales como BETA.

I am entering a photo contest that has the following format requirements: "Format: Images must be in RGB color format, horizontal, 300 dots per inch, 8 bit, and at least 9x12 inches when printed at 300 dpi. The pixel width should be 3600 and pixel height should be 2700."  I have no issue setting this in Photoshop, however, the submission page requires maximum of 5mg size.  How can I reduce the MB size without reducing the format required. I have tried saving as jpeg, gif and png and using Windows 11.

I'm currently using Photoshop 2023 on Windows 10, and I tried opening a .mp4 file, only, this time it gave me the error "Could not open "filename.mp4" because the video file could not be opened.I used Photoshop 2023 to open .mp4 as well as .mov files just earlier that same day. I tried looking it up but only found solutions for Mac. I have also tried restarting my PC as well as relaunching Photoshop 2023 with administrator permissions, neither worked.

To comply with the task in the tutorial, I was prompted to use the Content-aware fill icon in the Contextual task bar. I do not have a Content-aware fill icon. However, the Remove icon completed the task needed.